Middle Atlantic Products C5 SERIES CREDENZA RACK User manual

a s s e m b l y in s t r u c t io n s
C5 series
c re d e n za ra c k
Thank you for purchasing the C5 Series Credenza Rack. Please read all instructions thoroughly
before assembling this product.
PRODUCT FEATURES
Built in thermostatically controlled cooling.
Heavy duty frame ships separate to allow for equipment integration before finished surfaces are
attached.
14 rackspaces per bay.
Factory installed casters.
Weight rating of 800 pounds, including finishing kit*, with maximum 350 pounds located on
top surface. (*Middle Atlantic Products supplied finishing kit is 200 pounds complete)
Middle Atlantic Products
I 00661 Rev C

WARNINGS
^ WARNING Death or serious injury may occur when children climb on audio and/or video equipment urniture. A remote control or
toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on to the child.
^ AVERTISSEMENT La mort ou la blessure serieuse peut se produire quand les enfants s'elevent sur des meubles d'audio et/ou de
materiel video. Un a telecommande ou les jouets places sur la fourniture peut encourager un enfant a s'elever sur la fourniture et en
» consequence la fourniture peut incliner plus de dessus a l'enfant.
^ WARNING Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment
j. may result in death or serious injury due to the furnishing collapsing or over turning onto a child.
AVERTISSEMENT Replacer l'audio et/ou le materiel video aux meubles pas specifiquement congus pour soutenir l'audio et/ou le
materiel video peut avoir comme consequence la mort ou la blessure serieuse due a s'effondrer de fourniture ou au dessus de la
rotation sur un enfant.
WEIGHT DISTRIBUTION/MONITOR SIZING
Monitor may be free standing for 1, 2 or 3 bay units.
When using free standing monitors, monitors must not
extend beyond the width of work surface:
1 Bay = 23.50 “
2 Bay = 45.88”
3 Bay = 68.25“
596.9mm]
1165.35mm]
1733.55mm]
All units (1,2 or 3 bay) have a total maximum
equipment weight capacity of 600 lbs [272.15 Kg]
with a top work surface maximum weight
capacity of 350 lbs [158.76 Kg]
For 2 Bay using optional monitor mount kit:
Largest single monitor size: 80” [2032mm] diagnal
225 LB [102.06 Kg] Max weight
For 3 Bay using optional monitor mount kit:
Largest single monitor size: 80” [2032mm] diagnal
225 lbs [102.06 Kg] Max weight
Largest dual monitors: 65” [1651mm] diagnal
320 lbs [145.15 Kg] Max Weight
WARNING - Risk of Collapse and Instability. This enclosure is intended for use only with the equipment and maximum weights indicated.
Use with other equipment or equipment heavier than the maximum weights indicated may result in instability causing possible injury.
AVERTISSEMENT Risque d'effondrement et d'instabilite. Ce enceinte est prevu pour l'usage seulement avec l'equipement et
les poids maximum indiques. L'utilisation avec l'autre equipement ou l'equipement plus lourd que les poids maximum indiques peut avoir
comme consequence l'instabilite causant la blessure possible. Page 2

SIDE PANEL INSTALLATION
NOTE: For accessories related to the Side Panels, please read those instructions thoroughly before
continuing with the installation below
1) Install side panels by placing the four pre installed hooks into the four slots on the frame. (FIGURE B)
NOTE: When installing side panels, ensure door hinge plates are located at the front of the frame.
Page

HARDWARE KIT QTY
Configuration Hardware Kit Sub Hardware Kits Qty (All models get one
91 00517)
1 Bay 91 00514 91 00508/91 00518 1
2 Bay 91 00515 91 00508/91 00518 2
3 Bay 91 00516 91 00508/91 00518 3
TOP SURFACE INSTALLATION
NOTE: For accessories related to the Top Surface, please read those instructions thoroughly before
continuing with the installation below
NOTE: If installing a monitor mount, please read the instructions with the monitor mount prior to
installing.
1) Align the top using wooden dowels in the side panels as a guide. Attach top surface to the frame
using provided wood screws (HW Kit #91 00517), extra screws provided. (FIGURE C)
FIGURE C
Number of #10 x 5/8” Screws Used Per Credenza Top
Configuration Screws
3 Bay 12
2 Bay 8
1 Bay 4
Page 5

DOOR INSTALLATION
1) Install doors using provided wood screws (two places per door) as shown (HW Kit #91 00518).
(FIGURE D)
Page 6

DOOR INSTALLATION ONTO MULLION
1) Door to be installed onto credenza frame using provided screws (two places per door) as shown
(HW Kit #91 00518). (FIGURE E)
FIGURE E
Page 7

LOCK/KNOB INSTALLATION
1) Install lock/knob into pre drilled pilot holes. (FIGURE F)
FIGURE F
HINGE ADJUSTMENTS
J®
Door in open position
FIGURE G
Directional adjustments apply to the door in the closed position. Hinge adjustment is done with door in
open position. Refer to (FIGURE G) for appropriate adjustments.
(X) Side Adjustment: Adjusts horizontal placement of door. Adjusts door to door gap.
(2) Height Adjustment: Adjusts vertical height of door.
© Depth Adjustment: Adjusts the space between the door and the face of the frame of credenza.
Page 8

WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the C5 Credenza Frame to be free from defects in material or workmanship under normal use and conditions for the lifetime
of the product, the Cladding for (7) seven years, and the Fans for (3) three years from the date of shipment by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of and
refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after inspection
thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or any modification or alteration of the products. In addition, this warranty
does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER W ARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE
OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER
PARTY) HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973 839 1011 Fax [phone]
International Voice [phone] Fax [phone]
middleatlantic.com info@ middleatlantic.com
Middle Atlantic Canada
Voice 613 836 2501 Fax [phone]
middleatlantic.ca [e-mail]
Page 9
Factory Distribution
USA: NJ CA IL Canada: ON BC