Midea SK102 User manual

USER MANUAL OF SMART AC
CS373U-APP(SK102)
16122000003074
20160305
Company will notbe liable forany issues
and problems causedby Internet, Wi-Fi
Router and SmartDevices. Please contact
the original providerto get furtherhelp.
NOTE:

CONTENTS
Model: SK102
Standard:IEEE 802.11b/g/n
Antenna Type:Wxternal omnidirectionalAntenna
Frequency:WIFI 2.4G
Maximum Transmitted Power: 15dBm Max
Dimension:76*28*13(mm)
OOO O
Operation Temperature:0 C~45 C/32 F~113 F.
Operation Humidity:10%~85%
Power Input:DC 5V/300mA
Applicable system: IOS,Android.
(Suggest:IOS 7.0 orlater Android4.0 or later)
Due to specialsituation may beoccured, we explicitly
claims below:
Not all ofthe Andriodand IOS systemare compatible with
Midea AirAPP. We willnot be responsiblefor any issue
as a resultof the incompatibility.
Wireless safety strategy
Smart kit onlysupport WPA-PSK/WPA2-PSK encryption
and none encryption .
WPA-PSK/WPA2-PSKencryption is recommended.
Please Check TheService Website For More Information.
Hereby, wedeclare that this AC isin compliance
with the essentialrequirements and otherrelevant
provisions of Directive1999/5/EC. The declaration
of conformity maybe consulted withsales agent.
DECLARATION OF CONFORMITY
1
2
3
SPECIFICATION
PRECAUTIONS
1
DECLARATION OFCONFORMITY.........................1
SPECIFICATION...................................................1
PRECAUTIONS ....................................................1
TECHNICAL SOLUTION .......................................2
OPERATION INSTRUCTION.................................4
HOW TO USEAPP ..............................................13
SPECIAL FUNCTIONS ........................................16
2
3
4
5
6
7
1
This device complies with Part 15 of the FCC Rules
and RSS 210 of Industry & Science Canada. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Only operate the device in accordance with the
instructions supplied. This device complies with FCC
and IC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the
possibility of exceeding the FCC and IC radio frequency
exposure limits, human proximity to the antenna shall
not be less than 20cm (8 inches) during normal operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
CAUTIONS

1. Necessary Devicesto use SmartAC
1 Smart Phone
2Smart Air conditioner
3WIFIRouter
¢Ü
TECHNICAL SOLUTION
4
23
2. How toinstall the smart kit
Remove the protectivecap of the smart kit.
Open the frontpanel and insert the smart kit into
the reserved port
Insert into the
reserved port
Attach the QRcode packed withSMART KITto the
side panel ofthe machine, ensureit is convenience
to be scannedby the mobilephohe.
1
2
3
KOODXXXXXXXXXXXX
Smart Phone cameraneeds to be5 million pixelsor
above to makesure scan QRcode well.
Due to differentnetwork situation, sometimes, request
time-out could behappened, thus, itis necessary to
do network configurationagain.
Due to differentnetwork sitiuation, sometimes, control
process may returntime out. Ifthis situation occurs,
do not feelconfused, the displayon board andAPP
may not bethe same.

2.Set Air conditioner to be APmode
The procedure includesthe following steps:
1) Disconnect thepower supply of AC
2) Connect thepower supply of AC, and continuously
press the digitaldisplay button or do not disturb
button seven timesin 3 minutes.
3) When theAC displays AP ,it means that the AC WIFI
has already enteredinto the WIFI Network Setting
Mode.
Kindly reminder:
When theAC WIFI entered into WIFI Network Setting
Mode, theAir-conditioning infrared remote control
can't open theAC. It needs to wait 8 minutes or when
the ACfinish network configuration, the infrared
remote control cancontrol AC normally.
Some type ofAC do not need the 1) step to be inAP
mode
1).Iphone Users:scan QR Code or go to App Store and
search for Midea Air app and download it.
2).Android Phone users:scan QR Code or go to
google play,search for Midea Air app and
download it
1.Install App
OPERATION INSTRUCTION
''
5
45
12
Click "CreateAccount" Enter your emailaddress
and password, andthen
click "Registration" .
3.User Registrationand Network Configuration
Please ensure yourmobile device is connected to Wifi
router.Also, the Wifi router has already connected to
Internet before doinguser registration and network
configuration.
08:42 20:14
VI50828_a
Creat Accout
Forgot password?
[email protected]
Enter your E-mail address
Password
I have read and agree to the terms of service
65% 61%
Sign in
Registration
Sign up

6 7
3Press "+" 4
5
6
7
Scan QR Code
Select your ownWiFi
network, for example
My Home (thepicture
is only forreference)
Enter your ownWiFi
router password and
click OK;
Configuration Success,
you can seethe device
on the list.
Using Androiddevice to doNetwork configuration
20:14
Align the QR code within the frame to scan
The first press of restart
61%
QR Code Pictures
CAUTION:
It is better to log in your email box and active your
registration account by clicking link in case you forget
the password.
It is necessary to forget any other around network and
make sure the Android or IOS device just connect to the
WIFI network you want to configure.
Make sure the Android or IOS device WIFI function
works well and can be connected back to your original
WIFI network automatically.
Midea
Midea
ACD1FC
ACD1FC
ConditionerConditioner
Discover Me
ConditionerConditioner
Discover Me
My Home
Password
Cisco
Belkin
20:14
Air conditioner want to use your WiFi
61%
Network OK

8 9
Using IOS deviceto do Networkconfiguration
3Press "+ " 4Scan QR Code
20:14
Align the QR code within the frame to scan
The first press of restart
61%
QR Code Pictures
Midea
ACD1FC
ConditionerConditioner
Discover Me
5Read the instruction
above and pressthe
"Home" button toreturn
to the deviceinterface.
Click settings toenter
the setting page,select
WLAN/WIFI.
6
20:14 61%
Settings
Airplane Mode
WLAN Smart
Bluetooth Off
Cellular Off
VPN
Notifications
Control Center
Do Not Disturb
General
Search and connection
Settings
Airplane Mode
WLAN
Bluetooth
Cellular
On
Off
Connect to WIFI AC hot spot:
Return to the setting page of IOS Device > Click
WLAN > Select net_ac_xxxx > Return to the
current page.
Password: 12345678
SSID: net_ac_xxxx

Type defultpassword:
12345678 and click
"Join "
Return to "MideaAir"
APP and clickNext
Choose net_ac_XXXX
78910
11
Select your ownWiFi
network, for example
My Home (thepicture
is only forreference)
Enter your ownWiFi
router password and
click OK;
Settings WLAN
CHOOSE ANET WORK.....
ASUS-5GX
ASUS-2.4GX
bdptest1
bdptest1-5G
HIWIFI-22EF60
Midea
midea_fc_6866
MideaACIOT
net_ac_0010
zztest
20:14 61%
Joining "net_ac_0010"....
20:14 61%
Cancel Join
Enter Password
Password
10 11
My Home
Password
Cisco
Belkin
20:14
Air conditioner want to use your WiFi
61%
Network OK
Search and connection
Settings
Airplane Mode
WLAN
Bluetooth
Cellular
On
Off
Connect to WIFI AC hot spot:
Return to the setting page of IOS Device > Click
WLAN > Select net_ac_xxxx > Return to the
current page.
Password: 12345678
SSID: net_ac_xxxx

12 13
HOW TO USE APP
6
Please ensure bothyour mobile deviceand air
conditioner are connectedto the Internetbefore
using app tocontrol the airconditioner via internet,
please follow thenext steps:
12
Type yourown account
and password, Click
"Sign in "
Select the targetair
conditioner to enter
into the maincontrol
interface.
12 Configuration Success,
you can seethe device
on the list.
Midea
ACD1FC
ConditionerConditioner
Discover Me
08:42
VI50828_a
Creat Accout
Forgot password?
[email protected]
65%
Sign in
Midea
ACD1FC
ConditionerConditioner
Discover Me
When finishing networkconfiguration, APPwill
display success cuewords on thescreen.
Due to differentInternet environment, it is possible
that the devicestatus still display offline".
If this situationoccurs, user shouldturn off theAC
power and turnon it again.After a few minutes,
.
it is necessaryto do pull-refreshoperation to make
sure the devicestatus become "online"
NOTE:

14 15
345
Thus, user cancontrol
air conditioners on/off
status, operation mode,
temperature, fan speed
and so on.
Clicking "Discover ",
then user candiscover
different products.
Clicking "Me " , then
user can checkand
edit their personal
information.
NOTE:
Not all thefunction of theAPP isavailable on air
conditioner. Forexample: ECO, Turbo, Left andRight
Swing, Up andDown swing function,please check
the user manualto find moreinformation.
ConditionerConditioner
Discover Me
ConditionerConditioner
Discover Me
Sound
Advise
About
Push Messages
Nong Jun
1 Air conditioners

16 17
SPECIAL FUNCTIONS
7
Timer on/ Timer off
Weekly, user can make an appointment toturn on or
off ACon specific time. User also canchoose
circulation to keepthe ACunder schedule control
every week.
O
Including: Timeron, Timeroff, 8 C Heat, Sleep,
Check.
NOTE: If the airconditioner do notsupport the above
function, the functionwill be hidedfrom the function
list.
09
10
11
08 48
49
50
51
Repeat Mon,Tue
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check

18 19
O
8 C Heat Sleep
O
User can letthe ACrun under 8 CHeat by one-click.
When people gooutisde, this functioncan protect
your furniture fromfrost damage.
User can customizetheir own comfortablesleep
by setting targettemperature.
edit
young
Elder
Children
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check

20 21
Check
User can simplycheck theAC running statuswith
this function. Whenfinishing this procedure,it can
display the normalitems, abnormal items,and
detail information.
Testing 97
97
Normal
0
Abonormal
Abnormal:0
Normal:97
Compressor frequency
Compressor current
Outdoor machine current
Evaporator temperature
Condenser temperature
Exhaust temperature
Outdoor temperature