Midea MSW-7118P User manual

Before using your washing machine, please read this
manual carefully and keep it for future reference.
Read This Manual
Inside you will find many helpful hints on how to
use and maintain your washing machine properly.
Just a little preventative care on your part can
save you a great deal of time and money over the
life of your washing machine. You'll find many
answers to common problems in the chart of
troubleshooting tips. If you review the chart of
troubleshooting tips first, you may not need to call
for service.
OWNER’S MANUAL
Twin Tub Washing Machine
MSW-7118P

CONTENTS
SAFETY INSTRUCTIONS
Safety precaution ....................................................
Explanation of the symbols:...................................
INSTALLATION
Product description ..................................................
Unpacking the washing machine ...............................
Installation area ......................................................
Change the position of the drain hose ........................
.
OPERATIONS
Control panel ............................................................
Preparation before washing ......................................
Washing...................................................................
Rinse.......................................................................
Spin..........................................................................
Refer to the following table to select spinning time....
Reference of laundry quantity corresponding to different capacities..
Laundry volume and detergent dosage reference........
Special functions.........................................................
Maintenances
Cleaning and Care .....................................................
Cleaning the cabinet..................................................
Cleaning the inlet filter...............................................
Anti-freezing protection...........................................
Operation when objects are dropped into the outside of the spin tub.....
Trouble shooting.......................................................
Technical specifications.............................................
2
2
4
4
5
5
6
6
6
6
7
7
7
7
9
10
10
10
10
11
11
12
1

SAFETY INSTRUCTIONS
2
Safety precaution
！Warning!
This combination of symbol and signal word indicates a potentially
dangerous situation which may result in death or serious injuries
unless it’s avoided.
For your safety, the information in this manual must be followed
to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury or loss of life.
Caution!
This combination of symbol and signal word indicates a potentially
dangerous situation which may result in slight or minor injuries
or damage to property and the environment.
Note!
This combination of symbol and signal word indicates a potentially
dangerous situation which may result in slight or minor injuries.
This appliance is not intended for use by persons (including children) with reduced physical,
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
sensory
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
The new hose-sets supplied with the appliance are to be used and that old hose-sets should not
be reused.
The openings must not be obstructed by a carpet.
This appliance is intended to be used in household and similar applications such as:
− staff kitchen areas in shops, offices and other working environments;
− farm houses;
− by clients in hotels, motels and other residential type environments;
− bed and breakfast type environments;
− areas for communal use in blocks of flats or in launderettes.
Explanation of the symbols:
WASH RATED CAPACITY
SPIN RATED CAPACITY
MAXIMUM WATER PRESSURE
7.0 kg
3.6kg
0.6MPa

SAFETY INSTRUCTIONS
Do not install the machine in damp or rainy
environment to avoid electric shock, fire,
machine failure, or deformation.
Do not dismantle the machine
by yourself.
Forbid dismantling
Do not place inflammable materials
like burning candle, mosquito incense,
cigaret etc. or heating source like electric
stove, calorifier etc. on the machine.
To avoid electric shock
resulting from electric leakage,
please connect grounding wire
of the plug properly.
Grounding
Wipe off dirty and dust on the
plug often to prevent poor
contact with power supply.
Do not exceed the max. water
level to avoid water overflowing
and machine failure.
+
+
Make sure that the water inlet
hose is connected and the tap
is opened before washing.
Do not let baby climb to the machine
or play near running tub t o avoid
accident.
Do not put hands into the tub before
it stopping running.
If use warm water, the water
temperature should not
exceed 50℃.
Do not replace power cord by
yourself.
Do not pull the cord when
unplug the plug.
wat er pro of
Insert the plug tightly when use.
Unplug the plug from socket after use.
Do not spray water directly to the machine.
Do not wash clothes that are stained
with kerosene, petrol, alcohol, and
other flammable substance.
Do not wash down-filled coat, raincoat
or similar clothes.
Do not let baby sit on it or place heavy
things on it.
Do not insert or unplug the plug
with wet hands to avoid electric
shock.
This appliance is for indoor use only.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
3
！ ！ ！
！ ！！

INSTALLATION
Product description
• The product line chart is for reference only, please refer to real product as standard.
Note!
Drain hose
Accessories
manual
Or
Inner spin cover Water inlet hose
Control panel
Wash cover
Lint filter
Pulsator
Base
Spin cover
Cabinet
Safety cover
Frame
Wash tub
Power plug
Unpacking the washing machineUnpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
•
•
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation ! Keep all packaging well away from children.
Warning!
！
44

Installation area
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, level surface
2.Sufficient ventilation
3.Keep far away from the heat resources such as coal or gas.
as
and Avoid direct sunlight
, Room temperature is above 0 C
• wandering!
•
Stability is important to prevent the product from
Make sure that the product should not stand on the power cord.
Warning!
！
INSTALLATION
w
w
W> 20mm
Change the position of the drain hose
Front
Drain hose
According to the installation site, the drain hose can also be at the wash
side of the machine . The method is as follows:
The ex-factory installation position of the drain hose is located the spin side .
installed
at
1 Unplug the power cord and empty water in the drain hose
completely.
2 Spread a piece of soft cloth on the floor (e.g. a blanket)
and place the washing machine on it gently.
Take the drain hose out from the buckle at the spin side,
put it into the buckle at the wash side.
Hang up the drain hose kit.
.
.
3.
and
4.
Blanket
There are two ways to place the end of drain hose:
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
• If drain hose is too long, do not force it into machine as it will cause abnormal noises.
Trough
Hose
Retainer
Bind
Max.100cm
Warning!
！Warning! ！
water trough
Under3m
Under 15cm
100cm
Max.
1.For lower drain system
2.For upper drain system
5

Wash-Drain Selector
Preparation before washing
Wash timer: be used to select required washing time.
Spin timer: be used to select required spinning time.
●
●
● Wash-Drain selector: For washing or rinsing, select “ Normal”or“ Heavy”. For
draining ,select “Drain”
● Water inlet: be used to inject water.
.
Heavy Drain
Normal
• The product line chart is for reference only, please refer to real product as standard.
Note!
Drain
Wash-Drain Selector
Heavy Drain
Normal
Open tap
Plug in
Add detergent
Washing
load and Close door Put down the drain
Choose washing
program
Choose the washing time
To start washing clothes
Arrived after the water
level, Close the tap
6
Open the door
OPERATIONS
Spin timer
Wash timer Drain selector
Soak
35
15
10
5
Was h in let se lec tor
Water inlet selector
Washing Spinning
HeavyHeavyHeavyHeavy DrainDrainDrainDrain
NormalNormalNormalNormal
Wash-Drain SelectorWash-Drain SelectorWash-Drain SelectorWash-Drain Selector
• The product line chart is for reference only, please refer to real product as standard.
Note!
Control panel
• The maximum gradient of the supporting surface for the washing machine should not exceed 2º.
•Do not tear down electrical wires and components in the machine by yourself.
•There are holes on the base for ventilation. These holes should not be blocked by
foreign objects (carpets, etc.).
•Never connect the grounding wire with the live wire, or it may lead to an electric shock.
•Check that there are no objects such as coins, hairpins, mud or sand in the pocket.
•Strings should be knotted in advance to prevent entanglement.
•Clothes can be classified for washing according to the texture, dirty degree and color.
•For small pieces (e.g.,stockings) or fluffy clothes, put them into a nylon net for washing.
Warning!
！

2.0kg Capacity about 4 pcs. about 3 pcs. about 2 pcs. about 1 pcs.
3.0kg Capacity about 6 pcs. about 4 pcs. about 3 pcs. about 1 pcs.
3.6kg Capacity about 7 pcs. about 5 pcs. about 4 pcs. about 2 pcs.
5.0kg Capacity about 10 pcs. about 7 pcs. about 5 pcs. about 3 pcs.
6.0kg Capacity about 12 pcs. about 9 pcs. about 6 pcs. about 3 pcs.
7.0kg Capacity about 14 pcs. about 10 pcs. about 7 pcs. about 4 pcs.
7.5kg Capacity about 15 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
8.5kg Capacity about 17 pcs. about 12 pcs. about 9 pcs. about 5 pcs.
10.0kg Capacity about 20 pcs. about 15 pcs. about 10 pcs. about 6 pcs.
4.6kg Capacity about 9 pcs. about 6 pcs. about 5 pcs. about 2 pcs.
12.0kg Capacity about 24 pcs. about 18 pcs. about 13 pcs. about 7 pcs.
8.0kg Capacity about 16 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
Capacity
Laundry
...... ...... ...... ...... ......
Jacket
about 1600 g
Shirt
about 500 g
Uniform
about 650 g
Jeans
about 900 g
5.5kg Capacity about 11 pcs. about 8 pcs. about 6 pcs. about 3 pcs.
OPERATIONS
Spin
Spin cover
Safety cover
Shake out the laundry and
put them into the spin tub.
Put the inner spin cover on .
Confirm the inner spin cover is placed
horizontally.
the laundry Close the safety cover
and the spin cover.
Correct Incorrect
spin cover
Spin tub
Refer to the following table to select spinning time
About 50
seconds
About 1
minute
About 1-2
minutes
About 2-3
minutes
About 3-4
minutes
About 5
minutes
Spin time
Washing
materials Silk Light clothes
(fiber/blended)
Knitwear
(fiber)
Underwear
(cotton)
Slipover
(cotton/linen)
Toweling coverlet
(cotton)
Reference of laundry quantity corresponding to
different capacities
7
Wash-Drain Selector
Heavy Drain
Normal
Drain
Wash-Drain Selector
Heavy Drain
Normal
Open tap
Rinse
Choose washing
program
Choose the washing time
To start washing clothes
Arrived after the water
level, Close the tap

OPERATIONS
Laundry volume and detergent dosage reference
8
Synthetics,silk,
Delicate fabrics
High
Normal 3-5 About 46
Water
level
Fabric type Laundry
capacity(kg)Water flow Wash time
(minutes)
Detergent
amount(g)
Cotton or linen
Heavy soils
0-4.5
4.5-7.0
0-4.5
4.5-7.0
3.0-4.5
0-3.0 Low
Mid
Mid
High
Mid Heavy
Normal
10-35(soak 20)
10
7-10
7
3About 36
About 55
About 46
About 55
About 46

OPERATIONS
Wash timer
Soak
35
15
10
5
Work time
about 5 about 5 about 5
Total: 35 (mins)
about 1.5 about 1.5 about 2
Static time
For seriously stained clothes, soak wash is useful to achieve better wash result.
15-35 minutes of the wash timer is for soak wash:(illustrate as follows)
35 15
(unit：)mins
Special functions
Function of the buzzer is to alarm finish of washing, and it is helpful to control
wash process. Buzzer will alarm the completion of washing.
Soak function
For machines having the function only
Buzzer function
9

• Before your maintenance starts, please unplug the machine and close the tap.
Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Formic acid and its diluted solvents or equivalent are forbidden, such as
solvents or chemical products,etc.
•
alcohol,
Warning!
！
Note!
Cleaning and care
• Inlet filter must be cleaned if there is less water.
Note!
Lint filter clean
MAINTENANCES
1.
2.
3.
4.
Press the button head, and pull the lint filter out.
Turn the filter net inside out, and rinse it in water.
After inserting the claw, press the button to insert it into place.
A sound of “ba” means proper installation.
Button head
Claw
Anti-freezing protection
To prevent from freezing:
If the water is frozen, please take the following steps:
hose completely.
Lay the drain hose and turn the drain selector knob to the “Drain”position to empty
the water in the tub.
1. water
inlet
2.
Turn off the water tap, remove the water inlet hose and empty water in the
.Keep about 2 liters of warm water below 50℃ in the wash
tub for about 10 minutes and then lay the drain hose and
turn the wash drain selector knob to the “Drain”position
to empty the water .
1
2
.Put the water inlet hose into warm water of about 50℃.
10
Cleaning theinlet filter
Cleaning the cabinet

Cabinet
Frame
Operation when objects are dropped into the
outside of the spin tub
1.Remove all screws on the frame with a screw driver and
loosen the connector of the brake belt .
2.Pull up the frame with both hands and turn it backwards.
3.Take out the clothes dropped into the outside of the spin tub.
4.Fasten the connector of the brake belt ,Press the frame to
reset and tighten screws.
3.Fit the water inlet hose and turn on the water tap to
confirm water filling and draining work properly.
MAINTENANCES
If the following symptoms occur, please disconnect the power plug and
perform the following checks:
Check that the power supply is in good condition.
Check that the power plug is inserted properly.
●
●
● Check that the wash timer knob or the spin timer knob is not
in the "0" position.
Check that the drain hose is not laid too high.
Check that the drain hose is not frozen.
Check that the drain hose is not blocked by foreign matter.
●
●
●
Check that there are no coins or any other foreign objects
dropped into the wash tub.
●
Check that the washing machine is placed on flat, stable floor.
Check that clothes are evenly distributed in the spin tub.
Check that there are no washing materials or foaming debris
dropped into the outside of the spin tub.
●
●
●
The washing
machine does
not work.
The drain hose
does not work.
There is abnormal
noise during washing.
There is abnormal
noise and violent
vibration during
spinning.
Symptom Reason
11
Trouble shooting

MAINTENANCES
12
Technical specifications
Dimension
W*D*H mm)(
Pump Rated
Power
Washing Capacity
Model
Wash Spin Wash Spin
Water volume
Net
Weight
H:/M:/L:(L)
Rated Power
H:55 M:46 L:36
735*430*845
18.0kg
7.0 kg 3.6kg 320W 125W
MSW-7118P
soak wash:35 minwash:15 min Spin:5 min.
Maximum Water Pressure
Power Supply
0.6MPa
240V~,50Hz
Maximum Time