midiplus STUDIO 2 Instruction manual

Quick start manual
STUDIO 2
MIDIPLUS

1
Production introduction
Thank you to purchase MIDIPLUS USB audio STUDIO 2. STUDIO 2 is a two input/output audio interface with high
quality Mic and 24 bit/192kHz high precision sampling. It supports PC USB power,48V phantom power supply and
the USB2.0 (support 3.0) interface transmission speed is satisfied. Studio 2 has fashion appearance, no delay to
monitor, colourful indicator light, support MAC and WINDOW system and so on .
Package contents
STUDIO 2 audio
USB cable
Quick start manual
Information card
Adaptor
Production description
1.Input (MIC/Line/Hi-z) interfaces 6.Monitor input/output switch knob
2.Input gain control knob 7.Headphone gain control knob
3.Switch (Mic/Instrument) button 8.Stereo sound monitor switch button
4.48V phantom power supply 9.Headphone interface
5.Output volume control button

2
10.Output interfaces (Left & Right channel)
11.Extensible device interface
12.USB interface
Connect diagram

3
Driver install
Support Windows 7 or above version:
1.Connect STUDIO audio interface to the computer.
2.The system will detect the new USB driver and install automatically.
3.Go to the website www.midiplus.com to download STUDIO driver.
4.Install the driver according to the prompt.
5.After finish the install, the device can be used.
MAC system
Connect the STUDIO audio interface to the computer and start to use it.