Miele CS 1326 Specification sheet

Operating and installation instructions
Stainless steel TepanYaki
CS 1326
To avoid the risk of accidents or
damage to the appliance it is
essential to read these
instructions before it is installed
and used for the first time. M.-Nr. 07 180 440
en-GB

Guide to the appliance .............................................3
Accessories supplied ...............................................4
Warning and safety instructions .....................................5
Caring for the environment.........................................10
Before using for the first time.......................................11
Operation .......................................................12
Switching on and off ...............................................12
Residual heat indicator .............................................12
Settings .........................................................13
Tips ............................................................14
Cleaning and care ................................................15
Problem solving guide ............................................16
Optional accessories..............................................17
Safety instructions for installation...................................18
Appliance and building-in dimensions ...............................22
Preparing the worktop.............................................23
Installation of several appliances....................................24
Fixing the spring clamps and spacer bars ............................26
Installing the appliance(s)..........................................28
General installation tips ...........................................29
Electrical connection..............................................30
After sales service, data plate ......................................32
Contents
2

aRear cooking zone
bFront cooking zone
cSymbols to indicate which cooking zone the controls are for
dIndicators
eControl for rear cooking zone
fControl for front cooking zone
Indicators
gIn-operation indicator
hTemperature indicator light
iResidual heat indicator
Guide to the appliance
3

Accessories supplied
The accessories supplied with your TepanYaki as well as a
range of optional ones are available to order (see "Optional
accessories").
Spatula
For turning food
Guide to the appliance
4

This appliance complies with all
relevant local and national safety
requirements. Inappropriate use
can, however, lead to personal injury
and damage to property.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time.
They contain important notes on
installation, safety, use and
maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
Correct application
~This appliance is not designed for
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
–Shops
–Offices and showrooms
and by residents in establishments
such as:
–Hostels and guest houses.
~The appliance is intended for
domestic use only to cook food and
keep it warm.
Any other use is not supported by the
manufacturer and could be dangerous.
Miele cannot be held liable for damage
resulting from incorrect or improper use
or operation of the appliance.
~This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless they
are supervised while using it or have
been given instruction concerning its
use by a person responsible for their
safety.
Warning and safety instructions
5

Safety with children
~The appliance is only intended for
use by adults who have read these
instructions. This appliance is not a toy!
To avoid the risk of injury, keep children
well away and do not allow them to play
with it or use the controls. They will not
understand the potential dangers
posed by it. They should be supervised
whenever you are working in the
kitchen.
~Older children may use the
appliance only when its operation has
been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
~The appliance gets hot when in use
and remains hot for quite a while after
being switched off. To safeguard
against burning, keep children well
away from the appliance at all times.
~Do not store anything which might
arouse a child's interest in storage
areas above or next to the appliance.
Otherwise they could be tempted into
climbing onto the appliance with the
risk of burning themselves.
~Packaging, e.g. cling film,
polystyrene and plastic wrappings,
must be kept out of the reach of babies
and young children. Danger of
suffocation. Dispose of or recycle all
packaging safely as soon as possible.
Technical safety
~Before installation, check the
appliance for visible signs of damage.
Under no circumstances should you
use it if it has been damaged. It could
be dangerous.
~The electrical safety of this
appliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system which complies with current
local and national safety regulations. It
is most important that this basic safety
requirement is present and regularly
tested, and where there is any doubt,
the household wiring system should be
inspected by a qualified electrician.
Miele cannot be held liable for the
consequences of an inadequate
earthing system (e.g. electric shock).
~Before connecting the appliance to
the mains supply, make sure that the
voltage and frequency correspond to
the rating on the data plate, otherwise
the appliance could be damaged.
Consult a qualified electrician if in any
doubt.
~For safety reasons, this appliance
may only be used when it has been
built in.
Warning and safety instructions
6

~Never open the housing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
~Installation, maintenance and
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
~During installation, maintenance and
repair work, the appliance must be
disconnected from the mains electricity
supply.
~While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by Miele. Otherwise the
guarantee is invalidated.
~Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
~If the connection cable is damaged,
it must be replaced by a suitably
qualified electrician with a specialist
connection cable of type H 05 V V-F
(pvc insulated), available from the Miele
Spare Parts Department.
~Do not connect the appliance to the
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
~This appliance may be connected
via a fused plug and switched socket. If
you wish to connect it to an fused spur
connection unit, or if the appliance is
supplied without a plug, it must be
installed and connected by a suitably
qualified and competent person in strict
accordance with current local and
national safety regulations. The
manufacturer cannot be held liable for
damage caused by incorrect
installation or connection.
~In countries where there are areas
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage caused by cockroaches or
other vermin will not be covered by the
guarantee.
Warning and safety instructions
7

Correct use
~The appliance gets hot when in use
and remains hot for quite a while after
being switched off.
Danger of burning.
~Do not leave the appliance
unattended whilst it is being used. Oil
and fat are potential fire hazards as
they can ignite if overheated.
~If oil or fat does catch fire, do not
attempt to put out the flames with water.
Use a suitable fire blanket, saucepan
lid, damp towel or similar to smother the
flames.
~Do not use the appliance to heat up
the room. Due to the high temperatures
radiated, objects near the appliance
could catch fire. The life of the
appliance could also be reduced.
~Always use heat-resistant pot
holders or gloves when working with a
hot appliance. Do not let them get
damp or wet, as this causes heat to
transfer through the material more
quickly with the risk of scalding or
burning yourself.
~Do not flambé under a cooker hood.
The flames could set the cooker hood
on fire.
~Do not use the appliance as a
resting place for anything else. When
the appliance is switched on either
deliberately or by mistake, or when
there is residual heat present, there is
the risk of metal objects heating up,
with a danger of burning.
Depending on the material, other
objects left on the appliance could also
melt or catch fire.
Switch the appliance off after use.
~Where several appliances are
installed side by side
Do not place hot pots or pans on the
joining strip as this can damage the
seal.
~Do not cover the appliance, e.g.
with a cloth, kitchen foil, etc. This could
be a fire hazard if the hob were
switched on by mistake.
~Do not heat up unopened tins or jars
of food on the appliance as pressure
will build up in the tin or jar, causing it
to explode. This could result in injury
and scalding or damage.
~Do not use plastic utensils on the
appliance, as the Tepan plate gets very
hot. Even heat-resistant plastic utensils
are unsuitable.
Warning and safety instructions
8

~When using an electrical appliance,
e.g. a hand-held food blender, near the
gas hob, ensure that the cable of the
electrical appliance does not come into
contact with the hot appliance. The
insulation on the cable could become
damaged, giving rise to an electric
shock hazard.
~Spray canisters, aerosols and other
inflammable substances should not be
stored in a drawer under the appliance.
Cutlery inserts must be heat-resistant.
~Always ensure that food is
sufficiently cooked or reheated. Many
factors will affect the overall cooking
time, including the size and amount of
food and its temperature. Some foods,
e.g. poultry, may contain
micro-organisms which are only
destroyed by thorough cooking at a
sufficiently high temperature for long
enough. If in doubt, select a longer
cooking or reheating time.
~If the appliance is installed behind a
kitchen furniture door, it may only be
used with the furniture door open.
Only close the door when the appliance
is switched off and the residual heat
indicators have gone out.
~This appliance must not be set up or
operated in the open air.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and safety
instructions.
Warning and safety instructions
9

Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
Please dispose of it at your local
community waste collection/recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Caring for the environment
10

Please stick the extra data plate for the
appliance supplied with this
documentation in the space provided in
the "After sales service" section of this
booklet.
Cleaning for the first time
^Remove any protective foil and sticky
labels.
^Clean with a solution of washing up
liquid in warm water, and dry with a
soft cloth.
Metal components have a protective
coating which may give off a slight
smell when heated up for the first
time.
The smell and any vapours will
dissipate after a short time, and do
not indicate a faulty connection or
appliance.
Before using for the first time
11

The Tepan plate is divided into two
separate cooking zones which can be
switched on and regulated
independently of one another. The
entire area can be used when cooking
large quantities of food. When cooking
smaller quantities, the front zone can
be used for cooking whilst the rear
zone can be used to keep food warm
using a lower power setting.
Switching on and off
To switch the Tepan plate on, turn the
control clockwise. To switch off, turn
the control anti-clockwise.
Only turn the control clockwise as
far as "12" and anti-clockwise back
to "0" again to switch it off. Do not
attempt to turn it all the way round
from the "12" position to "0" or vice
versa. This will damage the control.
After switching on, the in-operation
indicator Nand the temperature
indicator %light up. The temperature
indicator light will switch on and off
intermittently in conjunction with the
heating element.
Residual heat indicator
After switching off, the residual heat
indicator lights up.
The residual heat indicator remains on
until the Tepan plate is cool enough to
touch.
Do not touch or place any heat
sensitive objects on the Tepan plate
while the residual heat indicator is
still on.
Danger of burning.
Operation
12

Settings
Cooking process Settings
Keeping cooked food warm 1 - 2
Steaming fruit, e.g. apple slices, peach halves,
sliced bananas, etc.
2-4
Gentle stir frying of chopped/sliced vegetables, e.g.
leeks, mushrooms, green/red peppers, onion etc.
5-7
Gentle frying of breaded or battered fish 7 - 9
Rapid frying in succession of meat, fish
fried eggs, pancakes, hash browns etc.
9-11
Frying potato pancakes, prawns, corn-on-the-cob 11 - 12
These settings are only a guide. The actual cooking time will depend on the type
of food, its texture and thickness as well as personal taste.
Operation
13

Tips
Wipe the surface of the Tepan plate
before each use with a damp cloth
to remove any dust particles or other
soiling which may have settled on it
since it was last used.
–Pre-heat the Tepan plate thoroughly
for 8 -10 minutes at the power level
that you are going to be using for
cooking. Pre-heat at power level 12 if
you are going to be cooking at
settings 9-12.
– It is important to get the Tepan
sufficiently hot before use,
particularly when browning and
sealing meat. If it is not hot enough,
the meat will lose too much juice and
become tough.
– For frying only use the minimum
amount of oil or fat. With marinated
food, no fat or oil is needed. Wait
until the temperature indicator light
has gone out before adding cooking
fat.
–Only use fats and oils which can be
heated to high temperatures.
–Marinating often improves the flavour
of food to be cooked.
–Pat wet food dry with kitchen paper
before cooking to prevent it spitting.
–To prevent meat drying out, do not
season with salt until after it has
been cooked.
Operation
14

Miele offer a range of branded cleaning
products. See "Optional accessories".
,Do not use a steam cleaner to
clean this appliance.
The steam could reach the electrical
components and cause a short
circuit.
The appliance should be cleaned after
each use. Let it cool down to room
temperature.
To avoid water marks and limescale
deposits, use a soft cloth to dry
surfaces that have been cleaned with
water.
To avoid damaging the surface of
your appliance, do not use:
– cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides,
– cleaning agents containing
descaling agents,
–stain or rust removers,
–abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–solvent-based cleaning agents,
–dishwasher cleaner,
–grill and oven cleaners,
–glass cleaning agents,
–hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents,
–sharp pointed objects
(these can damage the seal between
the frame and the worktop).
Use a spatula to remove any large
particles immediately.
Allow the appliance to cool down until it
can be touched by hand, and then use
a solution of hot water and washing-up
liquid to soften the soiling. Remove the
soiling with a spatula and then wipe the
surface with a damp cloth.
Then clean the appliance thoroughly
with a few drops of ceramic and
stainless steel hob cleaner using a
clean, damp cloth. Follow the
instructions on the packaging.
Ensure that every trace of cleaner has
been removed from the surface by
wiping carefully with a damp cloth. Any
remaining traces could affect food the
next time you use the appliance.
Finally dry the appliance with a clean,
soft cloth.
Important - Conditioning agents for
stainless steel must not be used on
the Tepan plate.
Cleaning and care
15

Installation work and repairs to
electrical appliances must only be
carried out by a suitably qualified
and competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK). Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if...
... after switching on, the appliance
does not heat up
Check whether the mains fuse has
tripped. If it has, contact a qualified
electrician or the Miele Customer
Contact Centre.
Problem solving guide
16

Miele branded cleaning and conditioning products are
available for your appliance.
These can be ordered via the internet at
www.miele-shop.com, or from Miele (see back cover for
contact details).
Ceramic and stainless steel hob cleaner 250 ml
Removes heavy soiling, limescale deposits and light
discolouration
E-Cloth (microfibre cloth)
Removes finger marks and light soiling.
Optional accessories
17

Fit the wall units and extractor hood
before fitting the TepanYaki to avoid
damaging the surface.
~The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~This appliance may only be used in
mobile installations such as ships,
caravans, aircraft etc. if a risk
assessment has been carried out by a
suitably qualified engineer.
~The Tepan Yaki must not be
installed directly next to a salamander
(CS 1421). It is essential to maintain a
distance of at least 150 mm between
these two appliances.
~Connection should be made via a
suitable isolator or a double pole fused
spur connection unit which complies
with current national and local safety
regulations, and the on/off switch
should be easily accessible after the
appliance has been built in. See
"Electrical connection" for more details.
~The appliance must not be built in
over a fridge, fridge-freezer, freezer,
dishwasher, washing machine or
tumble dryer.
~After installation, ensure that the
connection cable cannot come into
contact with the underside of the
appliance. Make sure that there is no
mechanical obstruction, such as a
drawer, which could damage it.
~Do not use any sealant except
where expressly instructed to do so.
The seal underneath the appliance
provides a sufficient seal for the
worktop (see "General installation tips").
~Observe carefully the safety
distances given on the following pages.
All dimensions in this instruction booklet
are given in mm.
Safety instructions for installation
18

Safety distance above the TepanYaki
A minimum safety distance must be
maintained between the Tepan plate
and the cooker hood above it. See the
cooker hood manufacturer's operating
and installation instructions for details.
If the manufacturer's instructions are
not available for the cooker hood, a
minimum safety distance of at least
760 mm must be maintained. For any
flammable objects, e.g. utensil rails,
wall units etc. a minimum distance of at
least 760 mm must be maintained
between them and the appliance
below.
When two or more appliances are
installed together below a cooker hood,
e.g. a TepanYaki and a gas hob
combiset, which have different safety
distances given in the installation
instructions, you should select the
greater distance of the two.
Safety instructions for installation
19

Safety distances to the sides of the
TepanYaki
Ideally the appliance should be
installed with plenty of space on either
side. There may be a wall at the rear
and a wall or a tall unit at one side. On
the other side, however, no unit or
divider should stand higher than the
appliance.
Due to the high temperatures radiated
by the TepanYaki, it is essential that a
minimum distance of 50 mm is
maintained between the worktop
cut-out and the back wall.
The minimum distance abetween the
worktop cut-out and a wall or tall unit to
the right or left of it is:
40 mm for CS 1212
CS 1221
CS 1234 / CS 1234-1
CS 1223
50 mm for CS 1112
CS 1122
CS 1134
CS 1326
CS 1411
100 mm for CS 1012
CS 1013
150 mm for CS 1421
CS 1312
CS 1322
200 mm for CS 1034
250 mm for CS 1011
CS 1018
CS 1021
Recommended
Not recommended
Not allowed
Safety instructions for installation
20