Miele SmartLine CS 7632 User manual

Operating and installation instructions
SmartLine Tepan Yaki
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en-GB M.-Nr. 10 803 081

Contents
2
Warning and Safety instructions.......................................................................... 4
Caring for the environment ................................................................................ 14
Guide to the appliance........................................................................................ 15
Tepan Yaki ............................................................................................................. 15
Controls / Indicators.............................................................................................. 16
Before using for the first time ............................................................................ 17
Cleaning the SmartLine element for the first time................................................. 17
Switching on the SmartLine element for the first time .......................................... 17
The induction principle ....................................................................................... 18
Setting ranges...................................................................................................... 19
Operation.............................................................................................................. 20
Using the appliance............................................................................................... 20
Setting the power level.......................................................................................... 21
Switching off.......................................................................................................... 21
Residual heat indicator.......................................................................................... 21
Setting the power level – extended setting range ................................................. 22
Switching the heating elements on together......................................................... 22
Tips on cooking..................................................................................................... 23
Keeping warm ....................................................................................................... 23
Timer..................................................................................................................... 24
Minute minder ....................................................................................................... 24
Switching off the heating element/Tepan Yaki automatically ................................ 25
Additional functions ............................................................................................ 26
Stop&Go.............................................................................................................. 26
Recall..................................................................................................................... 26
Wipe protection ..................................................................................................... 27
Demonstration mode............................................................................................. 27
Displaying the SmartLine element data ................................................................ 27
Safety features..................................................................................................... 28
System lock / Safety lock...................................................................................... 28
Safety switch-off ................................................................................................... 30
Overheating protection.......................................................................................... 31
Programming ....................................................................................................... 32
Cleaning and care ............................................................................................... 35
Control panel......................................................................................................... 36

Contents
3
Cooking surface .................................................................................................... 36
Problem solving guide ........................................................................................ 37
Optional accessories .......................................................................................... 40
Safety instructions for installation..................................................................... 41
Safety distances .................................................................................................. 42
Installation notes ................................................................................................. 46
Onset installation................................................................................................... 46
Flush-fit installation ............................................................................................... 47
Installing several SmartLine elements ................................................................... 48
Combination with a downdraft extractor............................................................... 48
Building-in dimensions ...................................................................................... 49
Onset installation................................................................................................... 49
Flush-fit installation ............................................................................................... 50
Worktop cut-out for onset installation .............................................................. 51
Worktop cut-out for flush-fit installation........................................................... 54
Spacer bars.......................................................................................................... 57
Installation............................................................................................................ 58
Preparing the worktop........................................................................................... 58
Fitting the spacer bars .......................................................................................... 58
Installing the SmartLine element ........................................................................... 59
Electrical connection .......................................................................................... 61
After sales service............................................................................................... 63
Contact in case of malfunction ............................................................................. 63
Data plate .............................................................................................................. 63
Warranty ................................................................................................................ 63

Warning and Safety instructions
4
This Tepan Yaki conforms to current safety requirements. Inappro-
priate use can, however, lead to personal injury and material dam-
age.
Please read these operating and installation instructions carefully
before using the Tepan Yaki for the first time. They contain import-
ant information on safety, installation, use and maintenance. This
prevents both personal injury and damage to the Tepan Yaki.
Miele cannot be held liable for damage caused by non-compliance
with these instructions.
Keep these instructions in a safe place and pass them on to any
future owner.

Warning and Safety instructions
5
Correct application
 This Tepan Yaki is designed for domestic use and for use in similar
environments.
 This Tepan Yaki is not intended for outdoor use.
 This Tepan Yaki is intended for domestic use only to cook food
and keep it warm. All other types of use are not permitted.
 This Tepan Yaki can only be used by people with reduced phys-
ical, sensory or mental capabilities or lack of experience and know-
ledge if they are supervised whilst using it. They may only use it un-
supervised if they have been shown how to use it in a safe way. They
must be able to recognise and understand the dangers of misuse.

Warning and Safety instructions
6
Safety with children
 Children under 8 years of age must be kept away from the Tepan
Yaki unless they are constantly supervised.
 Children aged 8 and older may only use the Tepan Yaki without
supervision if they have been shown how to use it in a safe manner.
Children must be able to understand and recognise the possible
dangers caused by incorrect operation.
 Children must not be allowed to clean the Tepan Yaki unsuper-
vised.
 Children should be supervised in the vicinity of the Tepan Yaki.
Never allow children to play with the Tepan Yaki.
 The Tepan Yaki gets hot when in use and remains hot for quite a
while after being switched off. Keep children well away from the Te-
pan Yaki until it has cooled down and there is no danger of burning.
 Danger of burning!
Do not store anything which might arouse a child's interest in stor-
age areas above or behind the Tepan Yaki. Otherwise they could be
tempted into climbing onto the Tepan Yaki.
 Danger of suffocation! Whilst playing, children may become en-
tangled in packaging material (such as plastic wrapping) or pull it
over their head with the risk of suffocation. Keep packaging material
away from children.
 Activate the system lock to ensure that children cannot switch the
Tepan Yaki on by mistake. Use the safety lock when the Tepan Yaki
is in use to prevent children from altering the settings selected.

Warning and Safety instructions
7
Technical safety
 Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and re-
pairs must only be carried out by a Miele authorised technician.
 Damage to the Tepan Yaki can compromise your safety. Check it
for visible signs of damage. Do not use a damaged Tepan Yaki.
 Reliable and safe operation of the Tepan Yaki can only be assured
if it has been connected to the mains electricity supply.
 The Tepan Yaki must not be connected to the inverter of an
autonomous power supply such as e.g.a solar power system.
When the Tepan Yaki is switched on, power surges could result in a
safety switch-off. This could damage the electronic module.
 The electrical safety of the Tepan Yaki can only be guaranteed
when correctly earthed. It is most important that this basic safety re-
quirement is present. If in doubt, the electrical installation should be
checked by a qualified electrician.
 Before connecting the Tepan Yaki to the mains supply, ensure that
the connection data on the data plate (voltage and frequency) match
the mains electricity supply. This data must correspond in order to
avoid the risk of damage to the appliance.
Compare this data before connecting the appliance. If in any doubt,
consult a qualified electrician.
 Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (fire hazard). Do not use these to
connect the Tepan Yaki to the mains electricity supply.
 For safety reasons, this Tepan Yaki may only be used after it has
been built in.
 This Tepan Yaki must not be installed and operated in mobile in-
stallations (e.g. on a ship).

Warning and Safety instructions
8
 Any contact with live connections or tampering with the electrical
or mechanical components of the Tepan Yaki will endanger your
safety and may lead to appliance malfunctions.
Do not open the Tepan Yaki housing under any circumstances.
 While the Tepan Yaki is under warranty, repairs should only be un-
dertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
 Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
 The Tepan Yaki is not intended for use with an external timer
switch or a remote control system.
 If the plug is removed from the connection cable or if the cable is
supplied without a plug, the Tepan Yaki must be connected to the
electrical supply by a suitably qualified electrician.
 If the mains connection cable is damaged, it must be replaced
with a special connection cable by an electrician (see “Electrical
connection”).

Warning and Safety instructions
9
 During installation, maintenance and repair work, the Tepan Yaki
must be completely disconnected from the mains electricity supply.
It is only completely isolated from the electricity supply when:
– the mains fuse is disconnected,
– the screw-out fuse is removed (in countries where this is applic-
able),
– the plug (if present) is removed from the socket. To do this, pull
the plug and not the mains connection cable.
 Danger of electric shock.
Do not use the Tepan Yaki if it is damaged or if it suffers damage
during use. Switch it off immediately. Disconnect the Tepan Yaki
from the electrical supply. Contact Miele Service.
 If the Tepan Yaki is built in behind a furniture front (e.g. a door), do
not close the furniture door while the Tepan Yaki is in use. Heat and
moisture can build up behind the closed furniture door. This can res-
ult in damage to the Tepan Yaki, the housing unit and the floor. Do
not close the furniture door until the residual heat indicators have
gone out.

Warning and Safety instructions
10
Correct use
 The Tepan Yaki gets hot when in use and remains hot for quite a
while after being switched off. There is a danger of burning until the
residual heat indicators go out.
 Due to the high temperatures radiated, objects left near the Tepan
Yaki when it is switched on could start to burn.
Do not use the Tepan Yaki to heat up the room.
 Oils and fats can ignite if allowed to overheat. Never leave the Te-
pan Yaki unattended when cooking with oil or fats. Never attempt to
put out oil or fat fires with water. Switch the Tepan Yaki off.
Extinguish the flames carefully with a lid or fire blanket.
 Do not leave the SmartLine element unattended whilst it is being
used. It should be continually monitored whilst boiling and flash fry-
ing.
 Flames could set the grease filters of a cooker hood on fire. Do
not flambé under a cooker hood.
 Spray canisters, aerosols and other inflammable substances can
ignite when heated. Therefore do not store such items or substances
in a drawer under the Tepan Yaki. Cutlery inserts must be heat-res-
istant.
 Heating up food in closed containers e.g. tins or sealed jars res-
ults in an increase in pressure will can cause them to explode. Do
not use the Tepan Yaki for bottling food or for heating up food in tins.
 If the Tepan Yaki is covered, there is a risk of the material catching
fire, shattering or melting if the appliance is switched on by mistake
or if residual heat is still present. Do not cover the Tepan Yaki, e.g.
with a cover, a cloth or protective foil.

Warning and Safety instructions
11
 When the Tepan Yaki is switched on either deliberately or by mis-
take, or when there is residual heat present, there is the risk of any
metal items left on the Tepan Yaki heating up. Other materials can
melt or catch fire. Do not use the Tepan Yaki as a resting place for
anything. Always disconnect the Tepan Yaki from the power supply
when you have finished using it.
 You could burn yourself on the hot Tepan Yaki. Protect your hands
with heat-resistant pot holders or gloves when using the Tepan Yaki.
Do not let them get wet or damp. Heat transfers through damp and
wet material more quickly with the risk of scalding or burning your-
self.
 When using an electrical appliance, e.g. a hand-held food blender,
near the Tepan Yaki, ensure that the cable of the electrical appliance
cannot come into contact with the hot Tepan Yaki. This could dam-
age the cable insulation.
 Placing hot pans on the sensors and indicators could damage the
electronics underneath. Do not place hot pans on the sensors or in-
dicators.
 Because induction heating works extremely quickly, the temperat-
ure could reach the flash point of oils and fats within a very short
time. Do not leave the Tepan Yaki unattended whilst it is being used.
 For people fitted with a heart pacemaker: please note that the
area immediately surrounding the Tepan Yaki is electromagnetically
charged when it is switched on. It is very unlikely to affect a pace-
maker. However, if in any doubt, consult the manufacturer of the
pacemaker or your doctor.
 When switched on, the electromagnetic field of the Tepan Yaki
can impair the function of magnetisable objects. Do not leave credit
cards, digital storage devices, pocket calculators, etc. in the immedi-
ate vicinity of the Tepan Yaki.

Warning and Safety instructions
12
 Metal objects stored in a drawer under the Tepan Yaki can be-
come hot if the appliance is used intensively for a long time. Do not
store any metal objects in a drawer directly under the Tepan Yaki.
 The Tepan Yaki is fitted with a cooling fan. If a drawer is fitted dir-
ectly underneath the built-in Tepan Yaki, ensure that there is suffi-
cient space between the drawer and its contents and the underside
of the Tepan Yaki in order to ensure sufficient ventilation for the Te-
pan Yaki. Do not store pointed or small items or paper in the drawer.
They could get in through the ventilation slots or be sucked into the
casing by the fan and damage the fan or impair cooling.
 The Tepan Yaki gets very hot. Do not use plastic utensils. Even
heat-resistant plastic utensils are unsuitable.

Warning and Safety instructions
13
Cleaning and care
 The steam from a steam cleaning appliance could reach live elec-
trical components and cause a short circuit.
Do not use a steam cleaner to clean the Tepan Yaki.
 If the Tepan Yaki is built-in above a pyrolytic oven or cooker, do
not use it during a Pyrolytic cleaning programme as this could trigger
the overheating protection device on the Tepan Yaki (see “Safety fea-
tures” – “Overheating protection”).

Caring for the environment
14
Disposal of the packing mater-
ial
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the manufactur-
ing process and also reduces the
amount of waste in landfill sites.
Disposing of your old appli-
ance
Electrical and electronic appliances of-
ten contain valuable materials. They
also contain specific materials, com-
pounds and components, which were
essential for their correct function and
safety. These could be hazardous to hu-
man health and to the environment if
disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local com-
munity waste collection / recycling
centre for electrical and electronic ap-
pliances, or contact your dealer or
Miele for advice. You are also respons-
ible (by law, depending on country) for
deleting any personal data that may be
stored on the appliance being disposed
of. Please ensure that your old appli-
ance poses no risk to children while be-
ing stored prior to disposal.

Guide to the appliance
15
Tepan Yaki
aRear zone of Tepan
bFront zone of Tepan
cControls/Indicators

Guide to the appliance
16
Controls / Indicators
Sensor controls
aSwitching the SmartLine element on/off
bStop&Go
cWipe protection
dSwitching the heating elements on together/separately
eActivating/deactivating the keeping warm function
fNumerical keybank
For setting power levels/minute minder and switch-off times
gHeating element selection, automatic switch-off
hMinute minder
Indicator lights
iHeating element allocation, automatic switch-off
jResidual heat
kTimer display
: to
:
Duration
 System lock/safety lock activated
 Demonstration mode activated

Before using for the first time
17
Please stick the extra data plate for
the appliance supplied with this doc-
umentation in the space provided in
the “After sales service” section of
this booklet.
Remove any protective wrapping and
stickers.
Cleaning the SmartLine ele-
ment for the first time
Wipe all surfaces with a damp cloth
and then dry them.
Switching on the SmartLine
element for the first time
The metal components have a protect-
ive coating. Smells and possibly some
vapours may occur when the SmartLine
element is used for the first time. The
heating of the induction coils also
causes odours in the first few hours of
operation. With each subsequent use,
the odour is reduced until it disappears
completely.
The smell and any vapours given off do
not indicate a faulty connection or ap-
pliance and they are not hazardous to
health.
Please note that the heating-up time
for induction hobs is much shorter
than on conventional hobs.

The induction principle
18
The cooking surface of the Tepan Yaki
is heated by induction. An induction coil
is located under cooking surface. When
the Tepan Yaki is switched on, this coil
creates a magnetic field which impacts
directly on the cooking surface and
heats it up.
Risk of burning due to hot items.
When the Tepan Yaki is switched on
either deliberately or by mistake, or
when there is residual heat present,
there is the risk of any metal items
left on the Tepan Yaki heating up.
Do not use the Tepan Yaki as a rest-
ing place for anything.
After use, switch the Tepan Yaki off
with the sensor control.

Setting ranges
19
Cooking process Setting range
Keeping cooked food warm 1–2
Gently cooking fruit, e.g. apple slices, peach halves, bananas,
etc.
3–4
Gently frying vegetables, e.g. leeks, sliced mushrooms, green/
red peppers, onion rings, etc.
4–5
Cooking eggs, fish, meat, sausages, escalopes, vegetables
bacon
5–6
Cooking meat, fish, hash browns, potato cakes 6–8
Cooking steak, pancakes, marinated meat 8–9
These settings should only be taken as a guide. Cooking times will vary according
to the type, texture and thickness of the food being cooked.

Operation
20
Using the appliance
This SmartLine element is equipped
with electronic sensor controls which
react to finger contact. For safety reas-
ons, in order to switch the appliance on,
the On/Off sensor needs to be
touched for a little longer than the other
sensors.
Each time you touch a sensor, an aud-
ible tone sounds.
Only the printed On/Off symbol is
visible when the SmartLine element is
switched off. The other sensor controls
light up when the SmartLine element is
switched on.
Malfunction due to dirty and/or
covered sensor controls.
If the sensor controls are dirty or
covered this could cause them to fail
to react, to activate a function or
even to switch the appliance off
automatically (see “Safety features”,
“Safety switch-off”). Placing hot
pans on the sensor controls/indicat-
ors can damage the electronic unit
underneath.
Keep the sensor controls and indic-
ators clean and do not place any-
thing on top of them. Do not place
hot pans on them.
The Tepan Yaki has two cooking zones
which can be switched on and regu-
lated independently of one another. The
entire area can be used when cooking
food or keeping large quantities of food
warm. For smaller quantities, the rear
zone can be used for cooking food
whilst the front can be used for keeping
food warm with the keeping warm func-
tion.