MIGEL GHT 15 User manual
1
GHT 15
Please read this instruction manual carefully and familiarise
yourself with your hair trimmer before using for the rst time.
Voltage: 1.5 V (AA)
1.The battery should not be touched/changed with damp hands
2.Do not use the appliance on open wounds, laceration, sunburn or
blisters. Keep the trimmer away from scalp hair and eyes.
3.Do not submerge the appliance into water or any other liquid.
4.Do not use a faulty appliance under any circumstances.
5. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the
appliance.
1protective cap
2nose trimmer
3on/o switch
4beard trimmer
5battery cover
6storage base
7comb
8cleaning brush
ATTENTION
OVERVIEW
ELECTRIC PARAMETER
English
1
2
3
4
5
Note: when the packing is only composed by the product and the
instruction manual (no other accessories or unassembled pieces inside),
the “Content” chapter has to be removed.
6
8
7
2
1. Cleaning : Switch the appliance o and remove the Nose/ear hair
trimmer attachment or bear trimmer attachment from the appliance by
turning it and rinse it throughly under running water.
Do not wet the appliance unit.The appliance itself should be cleaned with
a dry cloth only.
After complete drying. Replace the ctuuing unit as well as the protective
cap
2. Oil the beard trimmer cutting unit :
Apply one or two drops of oil between the cutting teeth and spread out
the oil evenly.Wipe o excess oil with a cloth.
1. Before using the appliance, please insert the 1.5V Alkaline battery (not
included),type LR6, into the battery compartment with the correct polarity.
2. Please make sure that the appliance is properly reassembled before
starting to use it.
3. Nose/EAR HAIR TRIMMER
Remove the protective cap on the trimmer and push the on/o switch
upwards.Now the cutter ratates and you can start trimming hairs in nose
and ear.The integrated light will be helpful.
4. Beard Trimmer
Take the nose/ear hair trimmer attachment o the appliance by turning
it.The beard trimmer attachment is also inserted by turning it whist
pressing on the housing at the same time. Make sure, before attaching it,
that the cutting unit points to the right by about a quarter turn so that the
two inner riges t properly into the guide grooves on the upper housing.
The beard trimmer is particularly suitable for use on areas that are dicult
to reach and shorten or shape(smaller) beard. The integrated light will be
helpful
MAINTENANCE AND CLEANING
OPERATION
3
This product bears the selective sorting
symbol for Waste electrical and electronic
equipment (WEEE). This means that this
product must be handled pursuant to
European directive 2002/96/EC in order to
be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a
competent recycling organization or to the
retailer when he buys a new electrical or
electronic equipment.
For further information, please contact your
local or regional authorities
TROUBLE SHOOTING
Environment friendly disposal
Problem Cause Solution
Battery is empty Renew battery
The device
stops working
Cutting result is not
satifactory
The cutting head
and/or cutting block
are not clean
Clean the cutting
head and cutting
block
1
GHT 15
AA
2
Table of contents
Languages:
Other MIGEL Electric Shaver manuals
