MIGEL GSI 280 User manual
GSI 280
LCD
DCL
LCD
PUMP BOTTON
PUMP BOTTON
LCD
C
C
C
C
Self-Clean
Self-Clean
English
GSI 280
Power: 2400W
Voltage: 220-240VAC~50/60Hz
Dear customer!
Thanks for your worthful choice and condence to Migel brand.We
really hope that you enjoy operating this product.
IMPORTANT SAFEGARDS
TECHNICAL SPECIFICATION
Before using the electrical appliance, basic precautions should always be
followed including the following:
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the
appliance.
3. Cleaning and user maintenance shall not be made by children without
supervision.
4. This product has been designed for domestic use only. In case of any
commercial use, inappropriate use or failure to comply with the instructions, the
manufacturer is no t responsible and the guarantee will not apply.
5. Before connecting your appliance, check if the mains voltage is the same as
the voltage indicated on your appliance and that the power outlet is connected
to the earth.
6 .Ensure before each use that the electric cord or any other important part is
not damaged.
7. Keep the iron and its cord out of reach of children when it is energized or
cooling down.
8. Never direct the steam towards persons or animals never direct the steam jet
towards any other electrical or electronics appliances.
9. The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking.
10. If the appliance shows evidence of breakdown, malfunction, water leaks or 1
BEFORE FIRST USE
other abnormality, do not use it any more.
11. Always make sure the appliance is switched o, unplugged and cooled
down before doing any maintenance work.
12. IMPORTANT! This iron must not be left unattended while it is connected to
the supply mains and before it has cooled down.
13. Do not unplug the appliance by pulling on the cord or on the appliance.
14. Never immerse the iron, the stand, the cable or the plug in water. Never hold
them under the water tap.
15. The soleplate of the iron can become extremely hot and may cause burns
if touched. Do not allow the supply cord to come in contact with the soleplate.
16. If the supply cord is damaged, it must be replaced by qualied electrical
person only or the product must be disposed of.
17. Disconnect from mains power when lling the reservoir in the iron with
water.
18. The iron must be used and rested on a at, stable surface.
19. Always place and operate the iron on a at, solid, clean and dry surface.When
placing the iron on its stand, ensure that the surface on which the stand is placed
is stable.
20. For additional protection, this appliance should be connected to a household
residual current device (safety switch) with a rating of no more than 30mA. If
unsure consult your electrician for advice.
2
Unpack the appliance and check if all parts are there and undamaged.
should this not be the case, return the product to Kmart for replacement
The packing contains one steam iron and one ller cup.
Danger of suocation! Keep all packing materials away from children
Dispose the packaging material responsibly by using recycling facilities
available from the local council waste management service
Clean all parts before rst use. See cleaning and maintenance
Heat up the iron to its maximum temperature and iron over a piece of damp
cloth for several minutes this will burn-o any manufacturing residue
from the iron. Smoke and odour may occur for a short period during this
process, which is normal
.
.
.
.
.
KNOW YOUR STEAM STATION IRON
FEATURES
1
2
3
4
1. Steam shot button
2. Spray button
3. Water lling inlet
4. Water spray
5. Temperature select button (-)
6. Temperature select button (+)
7. LCD panel
8. Self cleaning button
9. Water tank
10. Soleplate
11. Continues steam button
5
6
7
8
9
10
3
.Your iron has an Anti-Drip system and Auto-O function
:Anti-Drip system
This is to prevent water escaping from the soleplate when the iron is
cold. During use, the anti-drip system may emit a clicking sound when
heating up or cooling down. This is normal and indicates that the system
.is functioning correctly
:Auto-O function
.The steam iron will automatically switch o if it is not in use for a while
11
OPERATION
4
Filling the water tank
1. Ensure that the iron is cold and not connected to the power supply.
2. Open the water lling inlet by lifting the cap.
3. Hold the iron in a tilted position and ll the water tank with plain water by
using the lter cap.
4. CAUTION! DO NOT exceed the max level on the water tank.
5. Close the water lling inlet by pressing down the cap until you hear a click.
Ensure the water tank is properly closed to avoid water spillage.
NOTES:
To avoid calcium deposits, distilled water are recommended to be used for the
steam iron.
To avoid damage or blockage of the steam iron, do not use any scented water
or additives.
Steam ironing
1. Position the iron vertically on its stand on a suitable at stable surface.
2. Ensure that the variable steam knob is on“0”position.
3. Connect the plug to a suitable power outlet. The LCD backlight come on in
green color, indicating the iron is connected.
4. Press temperature select button to select the desired fabric type/temperature.
The LCD backlight become blue and the thermometer icon will start ashing
and the soleplate start to heat up.
NOTE: Always follow the recommended ironing instructions found on the
garment. If there is no ironing instructions on the garment, use the heat
.settings in the table as reference
5
LCD screen
display
Fabric type
/ /
/ /
Acrylic, Acetate
Polymer, Rayon
Cotton blends
Approx.100 C
Approx.125 C
Approx.140 C
Approx.200 C
Silk
Wool
Wool blends
Corduroy
cotton
Denim
Linen
Iron temperature
.The thermometer icon will stop ash when the selected temperature is reached.
.Set the variable steam knob to your desired steam output and begin ironing.
If dry iron needed, keep the steam knob at“0”position.
CLEANING AND MAINTENANCE
1. Clean the upper part of the iron with a damp cloth. Use a mild detergent
if necessary.
2. Do not use alcohol, acetone, benzene, scourging cleaning agents etc., to
clean the iron. Do not use hard brushes or metallic objects.
3. Remove any deposits on the soleplate with a damp cloth. To avoid scratch-
ing the nishing, never use a metallic pad to clean the soleplate, ad never
place the iron on a rough surface.
4. To remove synthetic residue from the soleplate, iron over an old cotton rag
in high setting.
5. Always store the emptied iron horizontally on a stable surface with a cloth
protecting the soleplate.
Self-clean function
The self-cleaning function should be used on a regular basis, depending on
usage and the hardness of water used.
WARNING: Never pour white vinegar or an liquid cleaners into the water
tank!
1. Fill the water tank. Refer to OPERATION: Filling the water tank.
2. Position the iron vertically on its stand on a suitable surface.
3. Ensure that the variable steam know is in OFF position.
4. Connect the plug to a suitable power outlet.
5. Set to maximum ironing temperature.
6. Once the soleplate temperature is reached, unplug the iron from the
mains power.
7. Hold the iron over a sink, press and hold the self-clean button. Boiling wa-
ter and steam willl now emit from the holes on soleplate.
8. Carefully shake the iron forwards and backwards to allow any scale and
other deposits being expelled with the boiling water and the steam.
9. Release the self-clean button when the water tank is empty.
6
9. Plug the appliance into the mains socket set a temperature and leave in
operation for at least two minutes to dry the soleplate.
10. Unplug the iron and let the iron cool down fully.
7
You can help protect the environment!
Please remember to respect the local regulations: hand in
the non-working electrical equipments to an appropriate
waste disposal center
ENVIRONMENT FRIENDLY DISPOSAL
Table of contents
Languages:
Other MIGEL Iron manuals
