MikroTik GESP+POE-IN User manual

1.
2.
3.
4.
GESP+POE-IN
GESP+POE-IN
Connecting
Connect to your host device with an rj45 Ethernet connector end.
Secure grounding to your rackmount or other preferable grounded source.
Use an Ethernet cable to connect with the device on the mast to deliver PoE.
Apply power using the power adapter.
Mounting
It is possible to attach the device to a wall or mast using the provided bracket:

Guide screw through a bracket and secure it to the wall, use dowel depending on the wall material.
Clip the device to the bracket.
LED status
The device has an LED indicating the active status of the connected Ethernet port.
Accessories
The package includes the following accessories that come with the device:
SET1_ K-78 fastening set
Please connect the grounding cable to the well-grounded source.
Note. The information contained here is subject to change. Please visit the product page on  www.mikrotik.com  for the most up to date version of
this document.