MikroTik LHG Series User manual

LHG series
Quick Setup Guide and Warranty Information
The LHG is an outdoor wireless router with a built in directional antenna. It can be used as a CPE or for point to point links (use RouterO
wireless mode “bridge” to work as a single-client AP for point to point scenarios).
Assembly
Attach the two legs to the LHG case, then snap the assembed LHG unit to the grid in the appropriate locations. Fix the legs in place with two
self thread screws (Included, use philips screw driver PH2). The package also contains a grounding cable connector, and a 5 degree angle
adapter. More detailed instructions available on the product page on http://routerboard.com
Connecting
1. Open the ethernet door to connect an ethernet cable to the ethernet port, connect the other end of the ethernet cable to the included
PoE injector
2. Plug the PoE injector into your network switch or I P internet outlet
3. Plug the included power supply into the PoE injector to start up the device
4. et LAN computer IP configuration to automatic (DHCP)
5. Default IP address of the unit is 192.168.88.1, open this address in your web browser to start configuration. The username is admin
and there is no password
The device is preconfigured as a wireless client, and all you need to do is select the AP to connect to and set a device password. You can do
this in the quick ET tab that is loaded by default.
In case IP connection is not available, Winbox can be used to connect to the MAC address of the device.
In case you wish to boot the device from network, for example to use MikroTik Netinstall, hold the RE ET button of the device when starting it,
until the LED light turns off, then the device will start to look for Netinstall servers.
More information about using RouterO and connecting to this device in our documentation: http: mt.lv help
Powering
The device accepts powering only from Passive PoE injectors
Extension Slots and Ports
One 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-
over cables for connecting to other network devices.
One Integrated 2x2 MIMO wireless device with built in grid antenna
Buttons and Jumpers
RouterBOOT reset button (RE ET, front panel) has three functions:
•Hold this button during boot time until LED light starts flashing, release the button to reset RouterO configuration (total 5 seconds)
•Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10 seconds)
•Or Keep holding the button for 5 more seconds until until LED turns off, then release it to make the RouterBOARD look for Netinstall
servers (total 15 seconds)
Power on device with pressed reset button and release it right away in order to boot backup RouterBOOT (useful for debugging situations where
RouterO and Netinstall do not work).
The device includes a grounding connection (marked ⏚) which you should connect to the grounding installation of the tower or building where
the device will be used. This is to substantially reduce risk of E D and lightning damage.
Operating System Support
Currently tested operating system is MikroTik RouterO starting from version v6.38
ee www.routerboard.com for more information. Contact [email protected] 9-Jun-17

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.
IMPORTANT: Exposure to Radio Frequency Radiation.
13 cm minimum distance has to be maintained between the antenna and the occupational user and 28 cm to general public. Under such
configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
Antenna Installation. WARNING: It is installer's responsibility to ensure that when using the authorized antennas in the United tates (or
where FCC rules apply); only those antennas certified with the product are used. The use of any antenna other than those certified with the
product is expressly forbidden in accordance to FCC rules CFR47 part 15.204. The installer should configure the output power level of
antennas, according to country regulations and per antenna type. Professional installation is required of equipment with connectors to ensure
compliance with health and safety issues.
FCC ID numbers: TV7LHG5ACD, TV7LHG5ND, TV7LHG5NDM, TV7LHG5HPND
Industry Canada (IC: 7442A-LHG2ND)
This device complies with Industry Canada licence-exempt R standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC numbers: 7442A-LHG5ACD, 7442A-LHG5ND, 7442A-LHG5NDM, 7442A-LHG5HPND
ee www.routerboard.com for more information. Contact [email protected] 9-Jun-17

CE Declaration of Conformity
Full Declaration of Conformity (DoC) may be obtained by visiting this web page: http://routerboard.com/doc/
        !"  #$% & '()$  #* %#*##+
"'*,---./.01
!2!) 3 456789:;78   <;=>5?@?5 A;  !" ; B 6C87B;767B@; 6C6 6C:;67B;4@7; @D@6=B54@9 @ <?EF@7;G?@>8H@I@
?5DG8?;<J@45K@?;=7@B5,---./.01
0L0M N$#%#O)PQ !"%R)PMSTU%#Q*T*O%VU)OS)#*$W,---./.1
""    TX *  +Y )  !" #*#  *X T*# Y** T*
T'*,---./.Z1
"2$ $ T[      2[  !"  \'$$) $  ) +#) ) 
][!'$$),---./.2^1
# [#*T$  !"**)T'*,---./.\%__)P$)T'*)*
PT#[1
22T `abcdefghijfhkfbfjkaifjbcjlcmndaohbo  !"ji``hgpndabfoeghjbojhijonlaojfefobcjaojkfoboj
mhoeajjqabokajlofbfraojbcjhlcsofj,---./.ak
% t#  %    ()   !" )$% # # ()#   # u *  
"'*,---./.01
 0#  %     ()#  !" v #+#$  ()' M    %#M# %''
w*,---./.01
x* O#TyT !""Tz*,---./.{'TP|$%}|$)'$#zP$#T)$$1
) ~)#T)#PTO !"''T$)T*$)T,---./.!"T*#)#
 )    MM TP' #   !" N%)• €M• PU' M %*‚ Tƒ*$•T • $S ,---./.
S*$S#M#„*#T#M…TM•T1
") P *T     #   !"  #*$$  $  '†     *
%€*P,---./.21
tt# PM$   T)P ‡  !" P M# M MM$ &$$  $ &ˆ‰&$ %##&$
"T&,---./.01
tt#)) )#()# !")$%#()##)%#*_*"'*,---./.01
#$ t%MŠŠ%)  !"‹#+#$)ŒŒ•)%*%'
"'*,---./.011
#*T Ž$#*)PQ !"%•RMST•%#Q*T*OT%U)O•)#*$,---./.1
#* MP*PP !"*T)M*$M*$)$*$##•T'*,---./.1
ZZ *T))„[„[  !"%%#T'*,---./.‘#*'$)P[T#T*T'*
$)#P$)T1
& Härmed intygar MIKROTĪKL IA att denna RouterBOARD är i överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
#& TX* !"$*$)T*#Y**T*T'*,---./.Z1
EN. Instruction manual: Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More information on
http://wiki.mikrotik.com BG. Инструкция:Свържете адаптера на захранване, за да включите устройството. Отворете 192.168.88.1 в уеб браузър, за да
настроите продукта. Повече информация в http://wiki.mikrotik.com CZ. Návod k použití: Připojte napájecí adaptér k zapnutí přístroje. Otevřete 192.168.88.1 ve
webovém prohlížeči pro konfiguraci produktu. Více informací najdete v http://wiki.mikrotik.com DK . Instruktionsbog: Tilslut strømadapteren for at tænde for
enheden.Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet.Mere information i http://wiki.mikrotik.com FR. Mode d'emploi: Connectez l'adaptateur
d'alimentation pour allumer l'appareil. Ouvrez 192.168.88.1 dans un navigateur Web pour configurer le produit. Plus d'informations dans http://wiki.mikrotik.com DE.
Bedienungsanleitung: Verbinden ie das Netzteil, um das Gerät einzuschalten. Öffnen ie 192.168.88.1 in einem Web-Browser, um das Produkt zu konfigurieren.
Weitere Informationen im http://wiki.mikrotik.com EE. Kasutusjuhend: Ühendage toiteadapter seadme sisselülitamiseks.Avatud 192.168.88.1 in veebilehitseja
seadistada toodet. Rohkem teavet http://wiki.mikrotik.com ES. Manual de instrucciones: Conecte el adaptador de alimentación para encender la unidad. Abra
192.168.88.1 en un navegador web para configurar el producto.Más información en http://wiki.mikrotik.com IT. Manuale di istruzioni: Collegare l'adattatore di
alimentazione per accendere l'unità.Aprire 192.168.88.1 in un browser Web per configurare il prodotto.Maggiori informazioni in http://wiki.mikrotik.com LV.
Lietošanas instrukcija: Pievienojiet trāvas adapteri, lai ieslēgtu ierīci. Atvērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu. Plašāka informācija
http://wiki.mikrotik.com LT. Naudojimosi instrukcija: Prijunkite maitinimo adapterį įjunkite įrenginį.Į interneto naršyklę 192.168.88.1 Atidarykite galite konfigūruoti
gaminį.Daugiau informacijos rasite http://wiki.mikrotik.com HU. Használati utasítás:Csatlakoztassa a hálózati adaptert a készülék bekapcsolásához.Megnyitása
192.168.88.1 egy webböngészőben beállítani a terméket. Több információ http://wiki.mikrotik.com NL. Handleiding: luit voedingsadapter aan op het apparaat in te
schakelen.Open 192.168.88.1 in een webbrowser om het product te configureren.Meer informatie in http://wiki.mikrotik.com PL. Instrukcja obsługi:Podłącz
adapter zasilania, aby włączyć urządzenie. Otwórz 192.168.88.1 w przeglądarce internetowej, a b y skonfigurować urządzenie.Więcej informacji w
http://wiki.mikrotik.com PT. Manual de instruções:Conecte o adaptador de alimentação para ligar o aparelho. Abra 192.168.88.1 em um navegador da web para
configurar o produto.Mais informações em http://wiki.mikrotik.com R O . Instrucțiuni de utilizare : Conectați adaptorul de alimentare pentru a porni aparatul.
Deschide 192.168.88.1 într-un browser web pentru a configura produsul.Mai multe informații în http://wiki.mikrotik.com SK. Návod na použitie:Pripojte napájací
adaptér k zapnutiu prístroja. Otvorte 192.168.88.1 vo webovom prehliadači pre konfiguráciu produktu. Viac informácií nájdete v http://wiki.mikrotik.com SI. Navodila:
Priključite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Več informacij v http://wiki.mikrotik.com FI. Käyttöohje: Kytke
virtalähde päälle laitteen. Avaa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://wiki.mikrotik.com SE. Instruktionsmanual: Anslut nätadaptern för att
slå på enheten.Öppna 192.168.88.1 i en webbläsare för att konfigurera produkten.Mer information på http://wiki.mikrotik.com NO. Bruksanvisningen: Koble
strømadapteren for å slå på enheten. Åpne 192.168.88.1 i en nettleser for å konfigurere produktet.Mer informasjon på http://wiki.mikrotik.com GR. εγχειρίδιο
οδηγιών:Συνδέστε τον προσαρμογέα τροφοδοσίας για να ενεργοποιήσετε τη μονάδα.Ανοίξτε 192.168.88.1 σε ένα πρόγραμμα περιήγησης στο Web για να
διαμορφώσετε το προϊόν. Περισσότερες πληροφορίες στο http://wiki.mikrotik.com
ee www.routerboard.com for more information. Contact [email protected] 9-Jun-17