MikroTik RB260GS User manual

RB260 series
The RB260GS (CSS106-5G-1S) and RB260GSP (CSS106-1G-4P-1S) is a small switch with five Gi abit Ethernet
ports.
Connecting
•Choose your powerin solution, please see Powerin section for possibilities.
•Connect your Internet cable to port 1, and local network devices to ports 2-5.
•Set your computer IP confi uration to automatic (DHCP).
•Connect your direct input power jack if not usin POE, to start up the device.
•The Initial connection has to be done via the Ethernet cable, usin the MikroTik Winbox utility.
•Use Winbox to connect to the default IP address of 192.168.88.1 from any port, with the username admin
and no password.
•We recommend clickin the “Check for updates” button and updatin your system software to the latest
version to ensure the best performance and stability.
•Set up your password to secure the device.
Mounting
This device is desi ned for use indoors by placin it on the flat surface or mountin on the wall, mountin points are
located on the bottom of the device, screws are not included in the packa e. Screws with size 4x25 mm fit nicely,
dependin on your wall structure you can use dowels 6x30 mm and 6 mm drill bit if needed.
When mountin on the wall, please ensure that cable feed is pointin downwards. We recommend usin shielded
Cat5/6 cable for our devices. The IP ratin scale for this device is IPX0.
Powering
The device accepts power from the power jack or from the Ethernet port:
•Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plu ) accepts DC 11-30 V.⎓
•Ethernet port accepts passive Power over Ethernet DC 11-30 V.⎓
The power consumption under maximum load can reach 5 W. RB260GSP version with attachments 53 W.
Connectin to a POE Adapter:
1. Connect the Ethernet cable from the device to the POE port of the POE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data
and power flow.
3. Connect the power cord to the adapter, and then plu the power cord into a power outlet.
RB260GSP version Ethernet ports 2-5 can power other PoE capable devices with the same volta e as applied to
the unit (passive PoE over data lines only).
Configuration
Once lo ed in, we recommend clickin the “Check for updates” button in the QuickSet menu, as updatin your
RouterOS software to the latest version ensures the best performance and stability. For wireless models, please
make sure you have selected the country where the device will be used, to conform with local re ulations.
RouterOS includes many confi uration options in addition to what is described in this document. We su est
startin here to et yourself accustomed to the possibilities: https://wiki.mikrotik.com/wiki/SwOS/CSS106 . In case
IP connection is not available, the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of
the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see section Buttons and Jumpers.
See mikrotik.com/products for the latest version of this document. Document #50493 Modified on: 03.JUL.2019

Expansion slots and ports
•5x Gbit Ethernet ports.
•One 1 SFP port.
Reset button
RouterBOOT reset button has the followin functions. Press the button and apply the power, then:
•Release the button when reen LED starts flashin , to reset RouterOS confi uration to defaults.
•Release the button when the LED turns solid reen to clear all confi uration and defaults.
•Release the button after LED is no lon er lit (~20 seconds) to cause a device to look for Netinstall servers
(required for reinstallin RouterOS over the network).
Re ardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debu in and recovery.
Accessories
Packa e includes the followin accessories that come with the device:
•RB260GS - EU Switchin Power Supply DC ⎓12 V, 1 A, 12 W, Level VI, cable:1.5 m.
•RB260GSP - Power adapter 24 V DC 2.5 A 60 W 80% VI 121x54x33 cable 1.2 m plu 2.1 mm.⎓
•RB260GSP - EU/US power cord, D03+QT3 H05VV-F 3x0.75 mm2 1.83 m RoHS.
Please visit wiki pa es for MikroTik SFP module compatibility table:
https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table
Specifications
For more information about this product, specification and pictures please visit our web pa e:
RB260GS
https://mikrotik.com/product/RB260GS
RB260GSP
https://mikrotik.com/product/RB260GSP
Operating s stem support
The device supports SwOS software version 2.9. The specific factory installed version number is indicated in the
system menu /system resource. Other operatin systems have not been tested.
Each RouterBOARD switch series have their own firmware which cannot be installed on other series models! New
RB260GS (CSS106-5G-1S), new RB260GSP(CSS106-1G-4P-1S) supports SwOS v2.0 and newer. When
up radin the device, it will first load primary firmware and then make an up rade. In case a wron firmware file is
chosen, the device will continue to operate with primary firmware and you will be able to choose the correct file.
MikroTik mobile app
Use the MikroTik smartphone app to confi ure your router in the field, or to apply the most basic initial settin s for
your MikroTik home access point.
See mikrotik.com/products for the latest version of this document. Document #50493 Modified on: 03.JUL.2019

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B di ital device, pursuant to Part 15
of the FCC Rules. These limits are desi ned to provide reasonable protection a ainst harmful interference in a
residential installation.
This equipment enerates, uses and can radiate radio frequency ener y and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
uarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turnin the equipment off and on, the user
is encoura ed to try to correct the interference by one of the followin measures:
•Reorient or relocate the receivin antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any chan es or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the followin two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, includin
interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the
unit to ensure compliance.
Industr Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the followin
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
includin interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouilla e, et (2)
l'utilisateur de l'appareil doit accepter tout brouilla e radioélectrique subi, même si le brouilla e est susceptible d'en
compromettre le fonctionnement.
See mikrotik.com/products for the latest version of this document. Document #50493 Modified on: 03.JUL.2019

CE Declaration of Conformit
Manufacturer: Mikrotikls SIA, Brivibas atve 214i Ri a, Latvia, LV1039.
BG С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС.
Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: https://mikrotik.com/products
CS Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o
shodě je k dispozici na této internetové adrese: https://mikrotik.com/products
DA Hermed erklærer Mikrotīkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/53/EU. EU-
overensstemmelseserklærin ens fulde tekst kan findes på føl ende internetadresse: https://mikrotik.com/products
DE Hiermit erklärt Mikrotīkls SIA , dass der Funkanla entyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der vollständi e Text der EU-
Konformitätserklärun ist unter der fol enden Internetadresse verfü bar: https://mikrotik.com/products
EL Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RouterBOARD πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της
δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: https://mikrotik.com/products
EN Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the followin internet address: https://mikrotik.com/products
ES Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RouterBOARD es conforme con la Directiva 2014/53/UE. El texto
completo de la declaración UE de conformidad está disponible en la dirección Internet si uiente: https://mikrotik.com/products
ET Käesoleva a deklareerib Mikrotīkls SIA , et käesolev raadioseadme tüüp RouterBOARD vastab direktiivi 2014/53/EL nõuetele. ELi
vastavusdeklaratsiooni täielik tekst on kättesaadav jär misel internetiaadressil: https://mikrotik.com/products
FI Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi RouterBOARD on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen
täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products
FR Le soussi né, Mikrotīkls SIA , déclare que l'équipement radioélectrique du type RouterBOARD est conforme à la directive 2014/53/UE. Le
texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: https://mikrotik.com/products
HR Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o
sukladnosti dostupan je na sljedećoj internetskoj adresi: https://mikrotik.com/products
HU Mikrotīkls SIA i azolja, ho y a RouterBOARD típusú rádióberendezés me felel a 2014/53/EU irányelvnek. Az EU-me felelősé i nyilatkozat
teljes szöve e elérhető a következő internetes címen: https://mikrotik.com/products
IT Il fabbricante, Mikrotīkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD è conforme alla direttiva 2014/53/UE. Il testo
completo della dichiarazione di conformità UE è disponibile al se uente indirizzo Internet: https://mikrotik.com/products
IS Hér með lýsir Mikrotīkls SIA því yfir að RouterBOARD er í samræmi við runnkröfur o aðrar kröfur, sem erðar eru í tilskipun 2014/53/EU.
Fullur texti ESB samræmisyfirlýsin ar er að finna á eftirfarandi veffan i: https://mikrotik.com/products
LT Aš, Mikrotīkls SIA , patvirtinu, kad radijo įren inių tipas RouterBOARD atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas
prieinamas šiuo interneto adresu: https://mikrotik.com/products
LV Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RouterBOARD atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams
šādā interneta vietnē: https://mikrotik.com/products
MT B'dan, Mikrotīkls SIA , niddikjara li dan it-tip ta' ta ħmir tar-radju RouterBOARD huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-
dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej: https://mikrotik.com/products
NL Hierbij verklaar ik, Mikrotīkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn 2014/53/EU. De volledi e tekst van
de EU-conformiteitsverklarin kan worden eraadplee d op het vol ende internetadres: https://mikrotik.com/products
NO Mikrotīkls SIA erklærer herved at utstyret RouterBOARD er i samsvar med de runnle ende krav o øvri e relevante krav i direktiv
2014/53/EU. Den fulle teksten til EU-samsvarserklærin en er til jen eli på føl ende internettadresse: https://mikrotik.com/products
PL Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowe o RouterBOARD jest z odny z dyrektywą 2014/53/UE. Pełny tekst
deklaracji z odności UE jest dostępny pod następującym adresem internetowym: https://mikrotik.com/products
PT O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RouterBOARD está em conformidade com a
Diretiva 2014/53/UE. O texto inte ral da declaração de conformidade está disponível no se uinte endereço de Internet:
https://mikrotik.com/products
RO Prin prezenta, Mikrotīkls SIA declară că tipul de echipamente radio RouterBOARD este în conformitate cu Directiva 2014/53/UE. Textul
inte ral al declarației UE de conformitate este disponibil la următoarea adresă internet: https://mikrotik.com/products
SK Mikrotīkls SIA týmto vyhlasuje, že rádiové zariadenie typu RouterBOARD je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o
zhode je k dispozícii na tejto internetovej adrese: https://mikrotik.com/products
SL Mikrotīkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je
na voljo na naslednjem spletnem naslovu: https://mikrotik.com/products
SV Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustnin RouterBOARD överensstämmer med direktiv 2014/53/EU. Den fullständi a
texten till EU-försäkran om överensstämmelse finns på följande webbadress: https://mikrotik.com/products
Note. Information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up to date version of this
document.
See mikrotik.com/products for the latest version of this document. Document #50493 Modified on: 03.JUL.2019

BG. Инструкция: С ържете адаптера на захран ане, за да ключите устройст ото. От орете 192.168.88.1 уеб браузър, за да
настроите продукта. По ече информация http://mt.lv/help-bg
CS. Návod k použití: Připojte napájecí adaptér k zapnutí přístroje. Otevřete 192.168.88.1 ve webovém prohlížeči pro konfiguraci produktu.
Více informací najdete v http://mt.lv/help-cs
DA. I struktio sbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet. Mere
information i http://mt.lv/help-da
DE. Bedie u gsa leitu g: Verbinden Sie das Netzteil, um das Gerät einzuschalten. Öffnen Sie 192.168.88.1 in einem Web-Browser, um das
Produkt zu konfigurieren. Weitere Informationen im http://mt.lv/help-de
EL. εγχειρίδιο οδηγιών: Συνδέστε τον προσαρμογέα τροφοδοσίας για να ενεργοποιήσετε τη μονάδα. Ανοίξτε 192.168.88.1 σε ένα πρόγραμμα
περιήγησης στο Web για να διαμορφώσετε το προϊόν. Περισσότερες πληροφορίες στο http://mt.lv/help-el
EN. I structio ma ual: Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More
information on http://mt.lv/help
ES. Ma ual de i struccio es: Conecte el adaptador de alimentación para encender la unidad. Abra 192.168.88.1 en un navegador web para
configurar el producto. Más información en http://mt.lv/help-es
ET. Kasutusjuhe d: Ühendage toiteadapter seadme sisselülitamiseks. Avatud 192.168.88.1 in veebilehitseja seadistada toodet. Rohkem
teavet http://mt.lv/help-et
FI. Käyttöohje: Kytke virtalähde päälle laitteen. Avaa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://mt.lv/help-fi
FR. Mode d'emploi: Connectez l'adaptateur d'alimentation pour allumer l'appareil. Ouvrez 192.168.88.1 dans un navigateur Web pour
configurer le produit. Plus d'informations dans http://mt.lv/help-fr
HR. Uputa za uporabu: Priključite napajanje i uključite uređaj. Za konfiguraciju uređaja u pregledniku otvorite 192.168.88.1. Više informacija je
na http://mt.lv/help-hr
HU. Hasz álati utasítás: Csatlakoztassa a hálózati adaptert a készülék bekapcsolásához. Megnyitása 192.168.88.1 egy webböngészőben
beállítani a terméket. Több információ http://mt.lv/help-hu
IT. Ma uale di istruzio i: Collegare l'adattatore di alimentazione per accendere l'unità. Aprire 192.168.88.1 in un browser Web per configurare
il prodotto. Maggiori informazioni in http://mt.lv/help-it
IS. Notku arleiðbei i gar: Tengdu straumbreytinn til að kveikja á tækinu. Opnaðu 192.168.88.1 í vafra til að stilla það. Nánari
upplýsingar á http://mt.lv/help-is
NO. I struksjo sma ual: Koble strømadapteren for å slå på enheten. Åpne 192.168.88.1 i nettleseren din for å konfigurere den. Mer
informasjon på http://mt.lv/help-no
LT. Naudojimosi i strukcija: Prijunkite maitinimo adapterį įjunkite įrenginį. Į interneto naršyklę 192.168.88.1 Atidarykite galite konfigūruoti
gaminį. Daugiau informacijos rasite http://mt.lv/help-lt
LV. Lietoša as i strukcija: Pievienojiet Strāvas adapteri, lai ieslēgtu ierīci. Atvērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu.
Plašāka informācija http://mt.lv/help-lv
MT. Ma wal tal-istruzzjo i: Qabbad l-adapter tal-qawwa biex iddawwar it-tagħmir. Iftaħ 192.168.88.1 fil-web browser tiegħek, biex jiġi
kkonfigurat. Aktar informazzjoni fuq http://mt.lv/help-mt
NL. Ha dleidi g: Sluit voedingsadapter aan op het apparaat in te schakelen. Open 192.168.88.1 in een webbrowser om het product te
configureren. Meer informatie in http://mt.lv/help-nl
PL. I strukcja obsługi: Podłącz adapter zasilania, aby włączyć urządzenie. Otwórz 192.168.88.1 w przeglądarce internetowej, aby
skonfigurować urządzenie. Więcej informacji w http://mt.lv/help-pl
PT. Ma ual de i struções: Conecte o adaptador de alimentação para ligar o aparelho. Abra 192.168.88.1 em um navegador da web para
configurar o produto. Mais informações em http://mt.lv/help-pt
RO. I strucțiu i de utilizare: Conectați adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 într-un browser web pentru a
configura produsul. Mai multe informații în http://mt.lv/help-ro
SK. Navodila: Priključite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Več informacij v
http://mt.lv/help-sk
SL. Návod a použitie: Pripojte napájací adaptér k zapnutiu prístroja. Otvorte 192.168.88.1 vo webovom prehliadači pre konfiguráciu produktu.
Viac informácií nájdete v http://mt.lv/help-sl
SV. I struktio sma ual: Anslut nätadaptern för att slå på enheten. Öppna 192.168.88.1 i en webbläsare för att konfigurera produkten. Mer
information på http://mt.lv/help-sv
NO. Bruksa vis i ge : Koble strømadapteren for å slå på enheten. Åpne 192.168.88.1 i en nettleser for å konfigurere produktet. Mer
informasjon på http://mt.lv/help-no
RU. Руководство по эксплуатации: подключите адаптер питания чтобы ключить устройст о. Откройте 192.168.88.1 с оем
еб-браузере для конфигурации. Дополнительная информация http://mt.lv/help-ru
CN. 说明书。 连接电源适配器以打开设备。 在Web 浏览器中打开192.168.88.1 进行配置。 有关http://mt.lv/help-zh 的更多信息
See mikrotik.com/products for the latest version of this document. Document #50493 Modified on: 03.JUL.2019