
20
M18 BLDD2 M18 BLPD2
TECHNICAL DATA CORDLESS PERCUSSION DRILL/DRIVER
Noise/vibration information
Always wear ear protectors!
WARNING Read all safety warnings, instructions, illustrations
and specifi cations provided with this power tool.
Save all warnings and instructions for future reference.
DRILL SAFETY WARNINGS
Wear ear protectors when impact drilling.
Use auxiliary handle(s), if supplied with the tool.
Hold the power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory may contact hidden wiring.
Never operate at higher speed than the maximum speed rated of the
drill bit.
Always start drilling at low speed and with the bit tip in contact with
the workpiece.
Apply pressure only in direct line with the bit and do not apply
excessive pressure.
SCREWDRIVER SAFETY WARNINGS
Hold the power the tool by insulated gripping surfaces, when
performing an operation where the fastener may contact hidden
wiring.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
WARNING
ENGLISH
470 080- M18BLDD2, M18BLPD2.indd 20470 080- M18BLDD2, M18BLPD2.indd 20 17.07.2018 11:15:3417.07.2018 11:15:34