mind alive Smart User manual

[OPERATOR’S MANUAL]
Usage and care of your AVE device

Version 1, Revision 0
September 2012
W A R N I N G
All persons who:
a) have a history of epilepsy, photic epilepsy or any seizure disorder,
b) suffer from any mental disorder or psychiatric illness,
c) are currently using any drugs (prescription or recreational),
d) are under the influence of alcohol,
e) have had any head injuries,
f) have ever had a seizure of any kind,
should not use the DAVID SMART unless under the supervision of a health care
provider qualified in the safe detection of seizures.
NOTICE TO HEALTH CARE PROVIDERS
It is the responsibility of the health care provider to complete a proper intake
addressing these concerns mentioned above. Mind Alive Inc., its employees,
suppliers and distributors are exempt of any liability in damages resulting from
a seizure or psychiatric condition that may occur from prescribing this device.
CLINICAL RESEARCH SHOWS THAT THE DAVID SMART IS EFFECTIVE
IN REDUCING COGNITIVE DECLINE,ADD, SAD, DEPRESSED MOOD,
INSOMNIA AND ANXIETY.
The DAVID SMART is a non-invasive tool.
All resulting effects are produced in the brain solely by
audio and visual stimulation.
All rights reserved.
Reproduction in whole or in part is forbidden without
the express written consent of Mind Alive Inc.
Tru-Vu Omniscreen Eyesets protected under U.S. Patent 5,709,645
© 2009-2012
Mind Alive Inc.
Edmonton, Alberta, Canada

[1]
TABLE OF CONTENTS
NOTICE TO HEALTH CARE PROVIDERS ............................................... INSIDE FRONT COVER
INTRODUCTION............................................................................................................2
COMPONENT LIST........................................................................................................................2
OPTIONAL ACCESSORIES ............................................................................................................2
SESSION CONTROLS ....................................................................................................3
VOLUME.........................................................................................................................................3
INTENSITY.....................................................................................................................................3
TONE SELECTION.........................................................................................................................3
HEARTBEAT SELECTION.............................................................................................................3
SAVING PREFERENCES ................................................................................................................3
OPERATING INSTRUCTIONS....................................................................................4
SETUP ............................................................................................................................................4
POWER...........................................................................................................................................4
TURN ON/TURN OFF..................................................................................................................5
BATTERY LEVEL...........................................................................................................................5
SELECTING A SESSION .................................................................................................................5
QUICK START ................................................................................................................6
ICON DESCRIPTIONS...................................................................................................7
SMART SESSIONS .........................................................................................................8
SOUND SYNC SESSIONS ..............................................................................................9
TONES AND HEARTBEAT ............................................................................................................9
WARNINGS .................................................................................................................. 10
PRECAUTIONS............................................................................................................................10
WARRANTY AND CARE........................................................................................... 11
RETURNING FOR REPAIRS .......................................................................................................11
FOR UNITED STATES AND INTERNATIONAL CUSTOMERS..................................................12
CARE AND MAINTENANCE.......................................................................................................12
DISCLAIMER OF LIABILITY.......................................................................................................12
TROUBLESHOOTING....................................................................INSIDE BACK COVER

[2]
INTRODUCTION
You have purchased the most innovative, high quality audio-visual entrainment
(AVE) device available on the market today. The DAVID SMART integrates the
necessary principles of audio/visual stimulation to safely and effectively guide
the user into desired states of consciousness and maximum brain functioning.
We are confident you will find using the DAVID SMART not only an enjoyable,
relaxing experience, but also beneficial as you explore heightened states of
consciousness and personal awareness.
The DAVID SMART is non-invasive and no electrical current is passed through
to the user. All resulting effects are produced in the brain solely by audio-visual
stimuli. The portability of the DAVID SMART lends itself to easy travel (airport
X-ray machines will not harm the DAVID SMART).
In order to obtain the maximum enjoyment and benefits from your
DAVID SMART, please read this operator's manual and the companion
DAVID User Guide thoroughly.
COMPONENT LIST
DAVID SMART –Serial Number ______________________________________
Tru-Vu Omniscreen Eyeset (white) and Carry Case
Headphones
Stereo Patch Cord
Carry Bag
9-Volt Alkaline Battery
9-Volt DC Power Adapter
Operator’s Manual, DAVID User Guide, and Quick Start Guide
OPTIONAL ACCESSORIES
Tru-Vu Omniscreen Multi-Color Eyeset
Tru-Vu Omniscreen Viewhole Eyesets
For eyes open use –available in white, blue, green, and yellow
Extra User Package
DAVID Session Editor
If you have any questions, require assistance, or wish to receive information
on new product developments and research currently being conducted at
Mind Alive Inc., visit our website at www.mindalive.com or call toll free at 1-
800-661-MIND(6463). Outside Canada and the U.S. call [phone].
GO ONLINE TO VIEW THIS MANUAL AT
www.mindalive.com/manuals/smart_manual.pdf

[3]
The Volume, Intensity,
and Power buttons
are raised to help you
find them easily with
eyes closed.
SESSION CONTROLS
VOLUME
The Volume level affects both tones and the heartbeat together. There are 30
volume levels. To adjust the volume, press and release or press and hold the
VOL or buttons. The Graph will display the volume level. The volume
cannot be adjusted during Soft Off™.
INTENSITY
The Intensity level affects the brightness of
the lights in the eyeset. There are 15 eyeset
intensity levels. To adjust the intensity, press
and release or press and hold the INT or
buttons. The Graph will display the
intensity level. The intensity cannot be adjusted during Soft Off™.
TONE SELECTION
There are three (3) different tone
options available in the SMART: Pulse
Tones, Binaural Beats, and Stereo
Monaural Beats. Tones may also be
turned off. All sessions start with
Pulse Tones. Press and release the
Tone button ( ) to cycle through the
tone options.
HEARTBEAT SELECTION
All sessions start with the heartbeat on. The heartbeat can be used to help
modulate breathing for improved HRV (see DAVID User Guide). To turn the
heartbeat on/off, press and hold the Tone button ( ).
SAVING PREFERENCES
You can save your preferred Volume, Intensity, Tone, and Heartbeat settings for
each session. Adjust the volume, intensity, and tone settings then press both the
INT and buttons at the same time. The session group icon will blink. You
may continue the session or end it immediately and the SMART will save your
preferred settings and use them the next time you run that session.
PULSE
BINAURAL
MONAURAL
OFF

[4]
OPERATING INSTRUCTIONS
SETUP
The headphones connect to the headphone output jack ( ). When using an
Extra User Package (sold separately), connect the 3.5mm splitter cable to the
SMART and connect each set of headphones to the splitter cable. It is
recommended that you disconnect the headphones from the unit before storing
or travelling to prevent accidental damage to the jack.
The Tru-Vu Omniscreen, Tru-Vu Omniscreen Viewhole, or Tru-Vu Omniscreen
Multi-Color Eyeset connect to the eyeset output jack ( ) with the included
2.5mm patch cord. Connect one end to the SMART and the other to the jack
located on the lower left of the glasses. When using an Extra User Package (sold
separately), connect the 2.5mm splitter cable to the SMART and connect each
eyeset to the splitter cable. It is recommended that you disconnect the eyeset
cable from the device and from the eyeset before storing or travelling to
prevent accidental damage to the jacks.
An external audio source (such as an MP3 or CD player) can be connected to the
SMART so that music or other audio can be listened to while running a session.
Plug the stereo patch cord into the headphone output of the audio device and
the audio input jack ( ) of the SMART.
Note: start the SMART and select a session before playing audio unless you
would like to run a Sound Sync Session (see page 9).
POWER
The SMART can be powered with a 9-volt alkaline or rechargeable battery, or
with the 9-Volt DC power adapter provided. To install the battery, slide the
cover off of the battery compartment on the back of the unit. Insert a
9-volt battery as indicated on the diagram in the battery compartment. Slide the
cover back into place. An alkaline 9-volt battery will provide approximately
seven (7) hours of operation
To use the 9-Volt adapter, connect the adapter to the 9-Volt jack ( ) on the
side of the unit. The 9-Volt DC power adapter uses a 1.3mm center-positive
plug. No battery power is used when plugged into an adapter.

[5]
Each Session button
remembers which option
was played last. If you ran
Energize 2, the next time
you select Energize the LED
will blink for Energize 2.
OPERATING INSTRUCTIONS
TURN ON/TURN OFF
Press and hold the Power button ( ) until the Power LED turns on. The graph
(between the VOL and INT controls) will display the battery level when you
first turn on the unit (see Battery Level). If no session is selected within two (2)
minutes, the SMART will turn off.
At the end of a session, the lights and sound will fade out (Soft Off™) and the
SMART will automatically turn off. To end a session early, press and release the
Power button ( ) quickly to initiate a short Soft Off™ (30 seconds).
To turn off the SMART at any time, press and hold the Power button ( ) until
the unit turns off. This may take up to three (3) seconds.
BATTERY LEVEL
The battery level is displayed on the graph for a couple of seconds when the
SMART is first turned on. The battery level is also monitored and displayed
periodically while the session is running.
When the battery level is getting low, the graph will display two (2) blinking
bars. It is recommended that you replace the battery before running a session if
this warning is displayed.
When the battery level is critically low, the graph will display a single (1)
blinking bar. If this warning is displayed when you turn the unit on, replace the
battery. If this warning occurs during a session, the session will end early and
the battery indicator will continue to blink for a short period of time. The
battery must be replaced before the unit can be used again.
SELECTING A SESSION
The SMART has five (5) session category buttons ( , , , , ). Each button
offers two (2) session options. Session 1 is indicated by the session LED on
solid. Session 2 is indicated by the session LED blinking.
To select a session, press the Session button.
The session LED will turn on. To select the
alternate session, press the Session button a
second time within five (5) seconds. Press a
different Session button to change the
current selection.
The selected session will start after a five (5)
second delay.

[6]
All the Session
LEDs are dimly lit
before a session is
selected so that
they can be easily
seen in the dark.
QUICK START
Find a comfortable spot
Sessions are an average of 30 minutes. Find a place where you won’t be
disturbed. Dark, quiet places are better.
Stay Hydrated
Drink a glass of water at least 15 minutes before your session. Staying hydrated
will help to prevent headaches or feeling groggy.
Connect Power
Insert the 9V battery according to the diagram inside
the battery compartment. Or connect the 9V Adapter
to the jack.
Plug in the Eyeset
One end of the eyeset cable connects to the jack on
the left side of the glasses, the other to the jack
on the unit.
Plug in the Headphones
Connect the headphone plug to the jack on the unit.
Turn on the Delight
Push and hold until the power light comes on.
Select a Session
Press a Session button ( , , , , or ) to start that session.
Press it again to select the alternate session.
See the sessions list for details (page 8).
Relax and Enjoy
The session will begin in 5 seconds. Put on the headphones and eyeset. Close
your eyes and relax.

[7]
ICON DESCRIPTIONS
Icon
Control
Power
Turn the SMART on/off
Initiate manual Soft Off™
Tone/Heartbeat Control
Cycle through the available tones
Turn the heartbeat on/off
VOL
Volume Control
Increase or decrease the loudness of the tones and
heartbeat
INT
Intensity Control
Increase or decrease the brightness of the eyeset lights
Icon
Connection
9-Volt DC Power Adapter
Audio Input (3.5mm, stereo)
Headphones
Tru-Vu Omniscreen Eyeset
Icon
Session Group (see page 8 for descriptions)
Energize
Meditate
Brain Booster
Sleep
Feeling Better

[8]
SMART SESSIONS
Energize 1 –Energizer (20 min)
Energize 2 –Super Energizer (18 min)
The Energize sessions are a great way to get going in the morning. Use them
as a caffeine-free burst of energy. Try Super Energizer for more energizing
results.
Brain Booster 1 –Smarter Mind (24 min)
Brain Booster 2 –Clearer Mind (25 min)
The Brain Brightener sessions are used to improve concentration and
memory. Clearer Mind is more effective for scattered minds and those with
ADD/ADHD.
Feeling Better 1 –Mood Booster (30 min)
Feeling Better 2 –Meditation with Mood Booster (42 min)
The Feeling Better sessions settle down negative thoughts while boosting
happiness. Mood Booster is best used in the morning, but may be used at any
time. Meditation with Mood Booster has a relaxing introduction to calm
generalized anxiety.
Meditate 1 –Brain Break (20 min)
Meditate 2 –Deep Meditation (40 min)
The Meditate sessions are a great way to calm down, relax, and re-focus.
Brain Break can be used any time for a quick recharge while Deep Meditation
is better for unwinding and de-stressing.
Sleep 1 –Paradise (45 min)
Sleep 2 –Serenity (40 min)
The Sleep sessions help guide you from restless wakefulness into sleep.
Paradise is for those with busy minds and tense bodies and helps to lower
anxiety and reduce tension. Serenity is most effective for busy minds and
relaxed bodies. Start with Paradise first and move to Serenity as needed.