OPERATING THE ONE-TOUCH BUTTON CAMERA
IMPORTANT NOTICE: Allow the device to charge 2 – 4 hours be ore
using.
HOW TO CHARGE THE BUTTON CAMERA
1. Plug the USB cable into the port on the button camera
2. Plug the USB cable into your PC
• The device will vibrate once
• The red indicator light blinks while charging
HOW TO TURN ON THE BUTTON CAMERA
1. Push and hold the Power button for 3 seconds
• The device will vibrate once
• The red light will turn on
• The device is now in standb mode
HOW TO TURN OFF THE BUTTON CAMERA
1. Push and hold the Power button for 3 seconds
• The device will vibrate twice
• The red light will turn off
HOW TO RECORD VIDEO
1. Put the device into standb mode
2. Push the Record Button for 3 seconds
• The device will vibrate twice
• The red light will blink twice and turn off
• The device is now recording video
o Every 15 minutes, the device will save the file
and start a new file
3. Push the Power button
• The device will vibrate 3 times
• The red light will turn on
• The device is back in standb mode
HOW TO TAKE PHOTOGRAPHS
1. Put the device into standb mode
2. Push the Record Button
• The red light will blink once
• The device will vibrate once
HOW TO RESET THE TIME AND DATE STAMP (All Platforms
1. Plug the device into your PC using the USB cable
2. Turn on the device
3. Locate “Removable isk” inside the (My) Computer folder
• Go to Start > Computer > Removable isk
4. Open the Removable isk drive
5. Right click with your mouse
6. Scroll down to “New”
7. Click “Text ocument”
8. Rename “New Text Document” as “time”
The title must be in all lowercase letters!