Mini Gadgets CDRFLD User manual

BUG DETECTOR WITH
RF AND LENS FINDER
SKU: CDRFLD
THANK YOU FOR PURCHASING THE BUG DETECTOR WITH
RF AND LENS FINDER
Please read this manual before operating the bug detector with RF
and lens finder and keep it handy.
RF detectors are simple radio frequency receiving devices. They are
designed to detect wireless signals that are being transmitted within
a certain frequency range. This unit detects 50 Hz to 6.0 GHz with
an adjustable frequency range. ost surveillance equipment
operates at 2.4 GHz.
This particular model can detect hidden wired and wireless video,
dead or alive, and has multiple alert modes including audible alarms,
LEDs, and vibration.
Your purchase should include:
1 x Bug Detector with RF and Lens Finder
1 x Set of Earphones
1 x Charging Cable
1 x A/C Adapter
1 x Instruction Booklet

WHICH HIDDEN DEVICES THE BUG DETECTOR WITH RF
AND LENS FINDER CAN FIND
• This device can detect frequencies within 50 Hz – 6.0 GHz
• Detects hidden video cameras dead or alive
• Detects wired & wireless hidden video cameras
• Sweeps and detects VHF, UHF, WiFi, Bluetooth and GS bugs
GET FAMILIAR WITH YOUR BUG DETECTOR WITH RF AND
LENS FINDER
Viewing
Lens
Functions

ode Button
Lens Detector ode
RF Alarm ode
RF Vibrate
LED Speed
Low
Battery
Indicato
LED Speed
Slow
RF Signal Low
RF Signal
Strong
LED Speed Fast
RF Signal High
LED Speed
edium
RF Signal edium
LED Lens Detection
RF Sensitivity
Tuner
Earphone
Jack
Charging Cable Input
On/Off
Switch

OPERATING THE BUG DETECTOR WITH RF AND LENS
FINDER
HOW TO USE LENS DETECTOR MODE
1. Switch the power ON.
2. The device should automatically be in Lens Detector ode.
• If not, press the ode Button until the Lens Detector
ode light is on.
3. You can push the LED Speed Button to change the blinking
speed of the LED lights, but it is not necessary.
• The light emitted by the hidden camera you are
looking for will appear in sync with the flashing of the
LED lights.
4. Look through the Viewing Lens to find hidden cameras
throughout your environment.
• In the right position, you will see the red light reflect
off the lens of any possible hidden cameras.
*NOTICE: The red reflection light will be small and difficult to see, so
look slowly and carefully.
HOW TO USE RF ALARM MODE
1. Switch the power ON.
2. Draw out the antenna.
3. Push the ode Button until the RF Alarm ode light is on.
4. Adjust the Sensitivity Dial accordingly.*
5. Hold the detector close to any area you suspect has a
transmission device.
6. If there is a transmission device, the detection gauge will start
to light up and the alarm will begin to sound.
• If you are far away from a transmission device, the RF
Signal Low light will be lit and the alarm will be a slow
tick.
• As you get closer to a hidden spy device, the RF Signal
edium, High, and Strong lights will come on, and the
alarm will also increase in speed.
HOW TO USE RF VIBRATION MODE
1. Switch the power ON.
2. Draw out the antenna.
3. Push the ode Button until the RF Vibrate ode light is on.
4. Adjust the Sensitivity Dial accordingly.*
5. Hold the detector close to any area you suspect has a
transmission device.
6. If there is a transmission device, the detection gauge will start
to light up and the device will vibrate.
• If you are far away from a transmission device, the RF
Signal Low light will be lit.
• As you get closer to a transmission device, the RF
Signal edium, High, and Strong lights will come on.
*NOTICE: If you are in an area with little to no transmission de ices,
then high sensiti ity is suggested.
If you are in an area with many transmission de ices, proceed with
the following actions:
1. Mo e away from all possible transmission de ices —
usually by standing in the middle of a large room or going outside.
2. Adjust the sensiti ity down until all the indicators lights
are off or at least only the first indicator light is on.
3. Go back inside and start mo ing around the room you
suspect has a transmission de ice. As you get closer to the source, the
indicator lights will light up one by one.
Ultimately, you may ha e to adjust the sensiti ity as you go to find
the best le el for your en ironment.
HOW TO USE SILENT MODE
1. ove the ode Switch into Alarm ode.
2. Plug earphones into the device.
• When the alarm sounds, only you will be able to hear it
through your headphones.

TROUBLESHOOTING
THE DEVICE WON’T TURN ON
• Charge the device.
• Replace the device
THE RED INDICATOR LIGHT IS ON
• This is the low battery indicator. Charge the device.
THE ALARM IS ALWAYS ON AND THE GAUGE LIGHTS ARE
ALWAYS AT FULL CAPACITY
• This means there are many transmission devices in your area
and the bug detector is picking up all the frequencies at once.
• Lower the sensitivity until just the RF Signal Low light is on.
OTHER PROBLEMS
• Call our technical support at 770-694-692
SPECIFICATIONS
Frequency
50
Hz
–
6.
0
GHz
Laser Detecting Range
of Wired Cameras
0.1 – 20 meters
Detecting Range of RF
Device
0.05 – 10 meters (Depending on the
transmitting power of the device)
Viewing Lens
IR Filtered Lens
Power Consumption
8 mA
Self-shooting Detecting
Wavelength
920 mm
Size
65 x 48 x 15 mm
Battery Internal Li-Ion
Full charge will last up to 6 hours for the lens
detector and up to 15 hours for the RF
detector