Mini Mania Mount Gen 3 Pro Series User manual

Pro Series Smartphone Mount Gen 3
MINI Smartphone Mount Pro Series | Ver 1.1
CRMC-1000-R130
1 of 5
Instructions for both the XL Scissor and XXL Clamshell Cradles for Gen 3 MINIs

Overview
Thank you for purchasing the MINI Smartphone Mount Pro Series from Mini Mania.
This kit is designed to allow the driver to position a smartphone for heads-up view without needing to handle the device.
Pro Series mounts allow you to customize your view by adjusting the extension arm to the angle that suits you.
The product is made from the highest grade materials and is guaranteed to be free from defects.
Simply snap in your mobile device and away you go!
You will now be able to swivel the device for Horizontal or Vertical viewing quickly and easily!
Fits the following models: 2014+ F56 MINI Cooper and Cooper S Hardtop
2015+ F55 MINI Cooper and Cooper S Hardtop 4-Door
2016+ F57 MINI Cooper and Cooper S Convertible
2016+ F54 MINI Cooper and Cooper S Clubman
P roc edure
1. There are two screws (TORX) holding the tach in place, one on either side.
3neGtnuoMenohptramSseireSorP
2 of 5
XL Scissor and XXL Clamshell Cradles for Gen 3 MINIs

2. Slide the tach towards you and remove the electrical plug from the rear of the tach to free it completely.
3neGtnuoMenohptramSseireSorP
3 of 5

3. Remove the 3 screws (TORX) in the back of the tach.
3neGtnuoMenohptramSseireSorP
4 of 5
2. (continued)

4. Place the “U” bracket in place and using the provided screws, tighten it down.
3neGtnuoMenohptramSseireSorP
5 of 5
5. Re-connect the electrical clip, slide your tach back into place and put the screws on either side back into place.