MiniFinder Atto User manual

MiniFinder®Atto
User Manual
English
© 2020 MiniFinder® All rights reserved
Updated: 2020/06/26

User Manual
www.mininder.com 1of 17
Thank you!Thank you!
Thank you for purchasing a MiniFinder®product. We believe you made the right choice.
MiniFinder®Atto is full of smart features that help you monitor, protect and locate your pets remotely.
Before you start using your Atto, please read this manual in its entirety.
PACKAGE CONTENTSPACKAGE CONTENTS
1 MiniFinder Atto
2 Micro USB charging cable
3 Collar (accessory)
2
12 3
PRODUCT OVERVIEWPRODUCT OVERVIEW
1
2 USB charging port
3 Speaker
1 Attachment for collar
5 GSM & GPS LED indicator
4 Microphone
2
54
3

User Manual
www.mininder.com 2of 17
PRODUCT MANAGEMENTPRODUCT MANAGEMENT
A. Please charge your device for 3 hours before using for the rst time.
B. During charging, the device will START automatically and the blue LED should display a steady,
consistent light.
C. The blue LED light goes out when fully charged.
D. If the unit is not in motion for more than 3 minutes, the energy saving mode will be activated.
E. The unit starts automatically from energy saving mode when motion is detected.
Please charge the device with the included USB cable. Connect it to a computer or to a power
adapter. See the image below.
EXPLANATION OF LED LIGHTSEXPLANATION OF LED LIGHTS
Single blink = Connected to GSM network
Double blink = Connected to GPRS network
Slow blink = Searching for GSM network
Steady light = No or faulty SIM card
3 sec
3 sec
1 sec
GREEN LED:

User Manual
www.mininder.com 3of 17
DOWNLOAD MINIFINDER GO APPDOWNLOAD MINIFINDER GO APP
To set up and track your MiniFinder Atto, you need to download MiniFinder GO GPS Tracking System APP.
Download the app by searching the “MiniFinder GO GPS Tracking” in Apple App Store
or Google Play store. Install the app to log in with your created or assigned login details.
If you read the documentation on your mobile phone, please click on the link below to
download the APP.
Apple iPhone: https://apple.co/2P3oYxN Android: http://bit.ly/2IengsS
BLUE LED:
3 sec
1 sec
Single blink = Connected to satellite
Slow blink = Searching for GPS signal
Steady blink = Charging
No light = Sleep mode or fully charged

User Manual
www.mininder.com 4of 17
APP OverviewAPP Overview
After logging in the MiniFinder GO APP, you will see the view as shown below.
This consists of 10 dierent parts:
1. Menu (Device List)
2. Alarm notication
3. Show map
4. Create / Edit GeoFence
5. Application settings
6. Application info & Help
7. View the position of my mobile phone
8. Zoom in / out
9. View street information of a selected GPS device
10. GPS device location indication on the map
Menu/Device ListMenu/Device List
Click the menu icon to open the menu. The menu consists of one or more devices (GPSs) depending
on how many licenses you have in the system.
1. Unit name
2. Time for the last position
3. Status icons:
Battery, GPS signal, GSM signal and motion
4. Action Menu (history, settings, ...)

User Manual
www.mininder.com 5of 17
Device StatusDevice Status
A GPS unit can have three dierent colors indicating status. Green (Online), Orange (Passive),
Red (Passive) and White (Oine).
A) Green: The device is online and sending position
right now.
B) Orange: The device is passive and has sent last
position more than 10 minutes ago.
C) Red: The device is passive and has sent last position
more than 1 hour ago.
D) White: The device is oine.
Regardless of the device’s status, you can always press the device row to display the latest
position on the map.
Alarm NoticationAlarm Notication
MiniFinder GO APP supports various types of alarms: Geofence alarm, Low battery alarm and speeding
alarm. All alarms send an alarm notication to the phone’s or tablet’s screen. Audio alert, vibration and
ashing alarm can be activated when opening the APP.
Images below show examples of alarm notications:
- An example of notications on a phone’ screen. - A ashing bell at the top right corner of the app.
- Click on the ashing alarm bell to see active alarms. Click on active alarms to conrm and move
them to the alarm history.

User Manual
www.mininder.com 6of 17
Action MenuAction Menu
At the far right of the row of units is an Action Menu (three vertical points). In the Action Menu you
can see history (History), call (Call) and settings (Setup).
HistoryHistory
See positioning history on the map based on date and time.
- Start by clicking the Action Menu (1), then click “History” (2).
- Select a time period and then click “View History” to display the device’s positioning history.
Atto
Atto

User Manual
www.mininder.com 7of 17
- The following information is displayed for positioning history:
1. A is the start position
2. B is the end position
3. Indicates a particularly selected position
4. The start date and time
5. The end date and time
6. Drag the blue dot to see a particular
position (3) on the map.
- When bringing up the sub screen, the detailed statistics are shown, including total distance,
total time and max speed. To clear the selected history, simply click “Clear History”

User Manual
www.mininder.com 8of 17
Call the DeviceCall the Device
To ring your device from your telephone, simply click on Action Menu (1) and then click on “Call” (2)
to start calling.
Rename DeviceRename Device
Edit device name through Device Setting.
Click the Action Menu (1) and then click on the “Setup” (2). Edit device name (3) with your preference.
Then click “Apply” to save the changes.

User Manual
www.mininder.com 9of 17
Authorize Telephone NumbersAuthorize Telephone Numbers
To be able to call the device, one or more phone numbers need to be authorized in the device.
- Open MiniFinder GO APP, click the Action Menu (1) and then click on the “Setup” (2).
- Enable authorization (3).
- Click on the ag (4) to select a country code.
- Select a country in the list (5).
- Enter a telephone number (6) to receive alarms.
- Click “Apply” to save the settings.
3
4
5
6