Minka Group MinkaAire Dyno-XL Guide

Dyno-XL
BY

F1001

INSTALLING THE UP HOUSING
BLADE INSTALLATION
INSTALLING THE FLYWHEEL
HANGING THE FAN
ELECTRICAL CONNECTIONS
14
15
FINISHING THE INSTALLATION
INSTALLING THE 24W LED ASSEMBLY
OPERATING THE REMOTE CONTROL/WALL CONTROL
ENJOY YOUR SMART CEILING FAN
CARE OF YOUR FAN
TROUBLESHOOTING
SPECIFICATIONS

DL-1170FCS-13-WIFI
DL-4510

24
8. Top housing
9. Fan motor assembly
14
10.
11.
12.
13.
14.

3

Screw
Mounting plate
Top housing
Fan motor
assembly
5
Step 1. Remove one of the screws from the fan motor mounting plate , but
do not remove, the other two screws. (Fig.5)
Step 2. Place the key holes from top housing over the two screws previously
loosened from the fan motor mounting plate. Turn the top housing until it
locks at the narrow section of the key holes. Secure by tightening the two
screws previously loosened and the one screw previously removed. (Fig.5)
INSTALLING THE TOP HOUSING