Minolta Di200 User manual

2002. 6 4011-7733-01
Copyright
2002 MINOLTA CO., LTD.
Printed in Japan
The information contained in this manual
is subject to change without notice to
incorporate improvements made on the
product or products the manual covers.
MINOLTA CO., LTD.
3-13, 2-chome, Azuchi-Machi, Chuo-ku, Osaka. 541-8556, Japan
● For the protection of the global environment and human
welfare, this manual was printed using soy ink.
● For the preservation of forests, this manual
was made using bagasse (sugar corn fibers
used in the production of wood-free paper).
User Manual
Di200
Di200
User Manual

P-1
This section contains detailed instructions on the operation and maintenance of this machine. To
achieve optimum utility of this device, all operators should carefully read and follow the instructions
in this manual. Please keep this manual in a handy place near the machine.
Please read the next section before using this device. It contains important information related to
user safety and preventing equipment problems.
Make sure you observe all of the precautions listed in this manual.
* Please note that some parts of the contents of this section may not correspond with the purchased
product.
■ Warning and Precaution Symbols
■Meaning of Symbols
SAFETY INFORMATION
Ignoring this warning could cause serious injury or
even death.
Ignoring this caution could cause injury or damage to
property.
A triangle indicates a danger against which you should take precaution.
This symbol warns against cause burns.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.
PL 05

P-2
• Do not modify this product, as a fire, electrical shock, or breakdown could
result. If the product employs a laser, the laser beam source could cause blind-
ness.
• Do not attempt to remove the covers and panels which have been fixed to the
product. Some products have a high-voltage part or a laser beam source inside
that could cause an electrical shock or blindness.
• Use only the power cord supplied in the package. Failure to use this cord could
result in a fire or electrical shock.
• Use only the specified power source voltage. Failure to do that could result in a
fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances or
machines. Use of a power outlet for more than the marked current value could
result in a fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an electrical shock
could result.
Plug the power cord all the way into the power outlet. Failure to do this could
result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or
damage the power cord. Use of a damaged power cord (exposed core wire, bro-
ken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your autho-
rized service representative.
• Do not use an extension cord, in principle. Use of an extension cord could cause
a fire or electrical shock. Contact your authorized service representative if an
extension cord is required.

P-3
Do not place a flower vase or other container that contains water, or metal clips
or other small metallic objects on this product. Spilled water or metallic objects
dropped inside the product could result in a fire, electrical shock, orbreakdown.
Should a piece of metal, water, or any other similar foreign matter get inside the
product, immediately turn OFF the power switch, unplug the power cord from the
power outlet, and then call your authorized service representative.
• Do not keepusing this product, if this product becomes inordinately hot or emits
smoke, or unusual odor or noise .Immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your authorized ser-
vice representative. If you keep on using it as is, a fire or electrical shock could
result.
• Do not keep using this product, if this product has been dropped or its cover
damaged. Immediately turn OFF the power switch, unplug the power cord from
the power outlet, and then call your authorized service representative. If you
keep on using it as is, a fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner may
scatter and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a grounding
terminal.

P-4
• Do not use flammable sprays, liquids, or gases near this product, as a fire could
result.
• Do not leave a toner unit or drum unit in a place within easy reach of children.
Licking or ingesting any of these things could injure your health.
• Do not let any object plug the ventilation holes of this product. Heat could accu-
mulate inside the product, resulting in a fire or malfunction.
• Do not install this product at a site that is exposed to direct sunlight, or near an
air conditioner or heating apparatus. The resultant temperature changes inside
the product could cause a malfunction, fire, or electrical shock.
• Do not place the product in a dusty place, or a site exposed to soot or steam,
near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown
could result.
• Do not place this product on an unstable or tilted bench, or in a location subject
to a lot of vibration and shock. It could drop or fall, causing personal injury or
mechanical breakdown.
• After installing this product, mount it on a secure base. If the unit moves or
falls, it may cause personal injury.
• Do not store toner units and PC drum units near a floppy disk or watch that are
susceptible to magnetism. They could cause these products to malfunction.
The inside of this product has areas subject to high temperature, which may
cause burns. When checking the inside of the unit for malfunctions such as a
paper misfeed, do not touch the locations (around the fusing unit, etc.) which are
indicated by a “Caution ! High Temperature !” warning label.
Do not place any objects around the power plug as the power plug may be diffi-
cult to pull out when an emergency occurs.
The socket-outlet shall be installed near the machine and shall be easily acces-
sible as the power plug may be difficult to pull out when an emergency occurs.

P-5
• Always use this product in a well ventilated location. Operating the product in a
poorly ventilated room for an extended period of time could injure your health.
Ventilate the room at regular intervals.
• Whenever moving this product, be sure to disconnect the power cord and other
cables. Failure to do this could damage the cord or cable, resulting in a fire,
electrical shock, or breakdown.
• When moving this product, always hold it by the locations specified in the User
manual or other documents. If the unit falls it may cause severe personal injury.
The product may also be damaged or malfunction.
• Remove the power plug from the outlet more than one time a year and clean the
area between the plug terminals. Dust that accumulates between the plug termi-
nals may cause a fire.
• When unplugging the power cord, be sure to hold onto the plug. Pulling on the
power cord could damage the cord, resulting in a fire or electrical shock.

P-6
Precautions for Routine Use
• Do not store toner units, PC drum units, and other supplies and consumables
in a place subject to direct sunlight and high temperature and humidity, as
poor image quality and malfunction could result.
• Do not attempt to replace the toner unit and PC drum unit in a place exposed to
direct sunlight. If the PC drum is exposed to intense light, poor image quality
could result.
• Do not unpack a toner unit or PC drum unit until the very time of use. Do not
leave an unpacked unit standing. Install it immediately or poor image quality
could result.
• Do not keep toner units and PC drum units in an upright position or upside
down, as poor image quality could result.
• Do not throw or drop a toner unit or PC drum unit as poor image quality could
result.
• Do not use this product in an area where ammonia or other gases or chemicals
are present. Failure to do so mayshorten the service life of the product, cause
damage or decrease performance.
• Do not use this product in an environment with a temperature outside the range
specified in the User manual, as a breakdown or malfunction could result.
• Do not attempt to feed stapled paper, carbon paper or aluminum foil through
this product, as a malfunction or fire could result.
Do not touch or scratch the surface of the toner unit, developing roller and the
PC drum, as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use of any
supply or consumable not recommended could result in poor image quality and
breakdown.

What is an ENERGY STAR®Products?
An ENERGY STAR® product has a special feature that allows it to automatically switch to a “low-power
mode” after a period of inactivity. An ENERGY STAR® product uses energy more efficienty, saves you
money on utility bills and helps protect the environment.
As an ENERGY STAR®Partner, we have determined that this machine
meets the ENERGY STAR®Guidelines for energy efficiency.

i
Thank you for choosing Minolta.
This user manual explains how to operate the copier and replenish its supplies. It also gives some
troubleshooting tips as well as general precautions to be observed when operating the copier.
To ensure the best performance and effective use of your copier, read this manual carefully until you
familiarize yourself thoroughly with its operation and features. After you have read through the manual,
keep it for ready reference.
Please use this manual as a quick and handy reference tool for immediately clarifying any questions
which may arise.
For Users of the Class B regulation’s countries
For Users except the Class B regulation’s countries
This device must be used with shielded interface cables. The use of non-shielded cables is likely to
result in interference with radio communications and is prohibited under CISPR 22 rules and local
rules.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
This device must be used with shielded interface cables. The use of non-shield cables is likely to result
in interference with radio communications and is prohibited under CISPR 22 rules and local rules.

ii
Contents
Safety Information.................................................................................................. v
Terms and Symbols for the Type of Originals and Copy Paper ......................... viii
Chapter 1 Safety Notes
1. Installing the Copier........................................................................................ 1-2
Installation Site ............................................................................................... 1-2
Power Source.................................................................................................. 1-2
Space Requirements........................................................................................ 1-2
2. Precautions for Use ......................................................................................... 1-3
Operating Environment................................................................................... 1-3
Acoustic noise................................................................................................. 1-3
Using the Machine Properly ........................................................................... 1-3
Moving the Machine....................................................................................... 1-3
Care of Machine Supplies............................................................................... 1-4
Legal Restrictions on Copying ....................................................................... 1-4
Chapter 2 Getting to Know Your Copier
1. Typical Copies You Can Make with Your Copier.......................................... 2-2
Typical copies you can make with your copier .............................................. 2-2
2. System Overview ........................................................................................... 2-4
System Overview............................................................................................ 2-4
Di200 and Options.......................................................................................... 2-4
Option ............................................................................................................. 2-6
Outside the Machine....................................................................................... 2-8
Inside the Machine.......................................................................................... 2-9
3. Control Panel Keys and Touch Panel............................................................ 2-10
Control Panel Keys and Indicators ............................................................... 2-10
What is the Touch Panel? ............................................................................. 2-11
Operating the Touch Panel ........................................................................... 2-11
How the Basic Screen is Organized.............................................................. 2-11
4. Turning ON and OFF and Initial Mode ........................................................ 2-13
Turning ON and OFF.................................................................................... 2-13
When Machine is Turned ON....................................................................... 2-13
Initial Mode................................................................................................... 2-13
5. Placing the Original....................................................................................... 2-14
Using the Document Feeder ......................................................................... 2-14
Loading the Originals in Document Feeder.................................................. 2-15
Placing the Original on the Glass ................................................................. 2-18
Mixed Orig. Detection.................................................................................. 2-20
6. Auxiliary Functions....................................................................................... 2-21
Auxiliary Functions ...................................................................................... 2-21
Icons.............................................................................................................. 2-24
Chapter 3 Making Copies
1. Basic Copying Overview ................................................................................ 3-2
Basic Copying Overview................................................................................ 3-2
2. Selecting the Paper.......................................................................................... 3-4
Paper Size ....................................................................................................... 3-4
Manual Bypass Copying................................................................................. 3-7
3. Selecting the Zoom........................................................................................ 3-12