Minolta EPI 054 User manual

EPI 054/EP1085/EP2030
I
GENERAL
MINOLTA

COTNENTS
1. SPECIFICATIONS .__........._.............................................................................. G-l
l-l. Specifications of EP2030 . . . ..__.........._....................................................... G-l
l-2. Specifications of EP1085 . . . . . . . . . .._............................................................. G-4
l-3. Specifications of EP1054 _._.........__........................................................... G-7
2. PRECAUTIONS FOR INSTALLATION . . . . .._._................................................... G-l 0
3. PRECAUTIONS FOR USE .._.__..........._............................................................ G-l 1
4. HANDLING OF THE CONSUMABLES
. . . . . . . . .._..._............................................G-12
5. SYSTEM OPTIONS . . ..___.._.......___..................................................................... G-13
5-l. System Options of EP2030 . . . ..__............_.................................................. G-13
5-2. System Options of EP1085 . . . . .._...........__.................................................. G-14
5-3. System Options of EP1054 . . . . . . . . . . . . . . . . ..__..................................................G-l 4

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
G-1
1174SBG0100A
1174SBG0101A
COPY MEDIUM
❍: Permissible –: Not permissible
1SPECIFICATIONS
1-1. Specifications of EP2030
TYPE : Desktop
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indirect Image Transfer to Plain Paper
PAPER FEEDING
SYSTEM : 3-Way Feeding 1st Drawer: Universal Tray (250 sheets of paper)
2nd Drawer: Fixed Paper Size Tray
(250 sheets of paper)
Multi Bypass Table
EXPOSURE SYSTEM : Mirror Scanning, Slit Exposure
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
tem
IMAGE TRANSFER
SYSTEM : Visible Image Transfer by means of a Single-Wire DC Negative Corona with Corotron System
PAPER SEPARATING
SYSTEM : AC Corona with Corotron System, plus Paper Separator Finger
FUSING SYSTEM : Heat Roller
PAPER DISCHARGING
SYSTEM : Charge Neutralizing Brush
MAXIMUM ORIGINAL
SIZE : Metric-A3L; Inch-11” ×17”L (L: Lengthwise)
1st Drawer
(Automatic
feeding)
2nd Drawer
(Automatic
feeding) Multi Bypass Table
Medium
Plain paper
(60 to 90 g/m²) ❍❍❍
Translucent paper – – ❍
Transparencies – – ❍
Thick paper
(91 to 157 g/m²) ––❍
Recycled paper ❍❍❍
Dimensions
Maximum
(Width ×Length) 297 ×432 mm 297 ×432 mm 297 ×432 mm
Minimum
(Width ×Length) 140 ×182 mm 140 ×182 mm 100 ×140 mm

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
G-2
CONTINUOUS COPY SPEED (copies/min.): Fed from 1st Drawer
L: Lengthwise; C: Crosswise
ZOOM RATIOS
MULTIPLE COPIES : 1 to 99
WARMING-UP TIME : 30 sec. or less with room temperature of 23°C and rated
power voltage
FIRST COPY TIME : A4C or 8-1/2” ×11”C: 7.2 sec. or less
(in Full size Mode using 1st Drawer)
Area Zoom Ratio ×1.00 Area Zoom Ratio ×1.00
Size Size
Metric
A3L
A4L
A4C
B4L
13
17
23
13
Inch
11” ×17” (L)
8-1/2” ×11” (L)
8-1/2” ×11” (C)
5-1/2” ×8-1/2” (L)
13
17
23
21
Fixed
Area Metric Inch
Mode Full Size ×1.000 ×1.000
Reduction ×0.816
×0.707
×0.500
×0.785
×0.647
×0.500
Enlargement ×1.154
×1.414
×2.000
×1.214
×1.294
×2.000
Variable ×0.500 to ×2.000 (in 0.001 increments)
LENS : Through Lens (F = 8.0, f = 180 mm)
EXPOSURE LAMP : Halogen Frost Tube Lamp
FUSING
TEMPERATURE :195°C

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
G-3
POWER/CURRENT CONSUMPTION (Copier Only)
ENVIRONMENTAL CONDITIONS
Voltage Exposure Lamp
(Rating)
Fusing
Heater
Lamp
(Rating)
Max. Power
Consumption In Standby
115V 80V
225W 115–120V 900W 1180W 935W
120V 80V
225W 115–120V 900W 1220W 965W
120–127V 80V
225W 115–120V 900W 1220–1290W 965–1070W
220–240V 160V
240W 220–240V 900W 1195–1270W 930–1060W
POWER
REQUIREMENTS : 115 V, 120 V, 120–127 V, 220–240 V; 50/60 Hz
Temperature 10 to 30°C with a fluctuation of 10°C or less per hour
Humidity 15 to 85% RH with a fluctuation of 10% RH or less per hour
Ambient Illumination 3,000 lux or less
Levelness 1° (1.75 mm/100 mm)
DIMENSIONS
(Copier Only) : Width .... 650 mm (25-1/2”) Depth .... 658 mm (26”)
Height ... 481 mm (19”)(including Original Cover)
WEIGHT : 57 kg (125-3/4 lbs)

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
G-4
1174SBG0102A
COPY MEDIUM
❍: Permissible –: Not permissible
1-2. Specifications of EP1085
TYPE : Desktop (with Stationary Platen)
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indirect Image Transfer to Plain Paper
PAPER FEEDING
SYSTEM : 2-Way Feeding Paper Drawer: Universal Tray (250 sheets of paper)
Manual Bypass Table
EXPOSURE SYSTEM : Mirror Scanning, Slit Exposure
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
tem
IMAGE TRANSFER
SYSTEM : Visible Image Transfer by meansofa Single-Wire DC Neg- ative Corona with Corotron System
PAPER SEPARATING
SYSTEM : AC Corona with Corotron System, plus Paper Separator Finger
FUSING SYSTEM : Heat Roller
PAPER DISCHARGING
SYSTEM : Charge Neutralizing Brush
MAXIMUM ORIGINAL
SIZE : Metric-A3L; Inch-11” ×17”L (L: Lengthwise)
Paper Drawer
(Automatic feeding) Manual Bypass (Single-sheet feeding)
Medium
Plain paper
(60 to 90 g/m²) ❍❍
Translucent paper – ❍
Transparencies – ❍
Thick paper
(91 to 157 g/m²) –❍
Recycled paper ❍❍
Dimensions
Maximum
(Width ×Length) 297 ×432 mm 297 ×432 mm
Minimum
(Width ×Length) 140 ×182 mm 100 ×140 mm

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
G-5
CONTINUOUS COPY SPEED (copies/min.): Fed from 1st Drawer
L: Lengthwise; C: Crosswise
ZOOM RATIOS
MULTIPLE COPIES : 1 to 99
WARMING-UP TIME : 30 sec. or less with room temperature of 23°C and rated
power voltage
FIRST COPY TIME : A4C or 8-1/2” ×11”C: 7.2 sec. or less
(in Full size Mode using 1st Drawer)
Area Zoom Ratio ×1.00 Area Zoom Ratio ×1.00
Size Size
Metric
A3L
A4L
A4C
B4L
12
16
18
13
Inch
11” ×17” (L)
8-1/2” ×11” (L)
8-1/2” ×11” (C)
5-1/2” ×8-1/2” (L)
11
16
18
18
Fixed
Area Metric Inch
Mode Full Size 100% 100%
Reduction 81% 70%
50%
78%
64%
50%
Enlargement 115% 141%
200%
121%
129%
200%
Variable 50% to 200% (in 1% increments)
LENS : Through Lens (F = 8.0, f = 180 mm)
EXPOSURE LAMP : Halogen Frost Tube Lamp
FUSING
TEMPERATURE :195°C

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
G-6
POWER/CURRENT CONSUMPTION (Copier Only)
ENVIRONMENTAL CONDITIONS
Voltage Exposure Lamp
(Rating)
Fusing
Heater
Lamp
(Rating)
Max. Power
Consumption In Standby
115V 80V
225W 115–120V 900W 1180W 935W
120V 80V
225W 115–120V 900W 1220W 965W
120–127V 80V
225W 115–120V 900W 1220–1290W 965–1070W
220–240V 160V
240W 220–240V 900W 1195–1270W 930–1060W
POWER
REQUIREMENTS : 115 V, 120 V, 120–127 V, 220–240 V; 50/60 Hz
Temperature 10 to 30°C with a fluctuation of 10°C or less per hour
Humidity 15 to 85% RH with a fluctuation of 10% RH or less per hour
Ambient Illumination 3,000 lux or less
Levelness 1° (1.75 mm/100 mm)
DIMENSIONS
(Copier Only) : Width .... 610 mm (24”) Depth .... 637 mm (25”)
Height ... 401 mm (15-3/4”) (including Original Cover)
WEIGHT : 50 kg (110-1/4 lbs)

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
G-7
1174SBG0103A
✽Except the U.S.A., Canada
COPY MEDIUM
❍: Permissible –: Not permissible
1-3. Specifications of EP1054
TYPE : Desktop (with Stationary Platen)
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indirect Image Transfer to Plain Paper
PAPER FEEDING
SYSTEM : 2-Way Feeding Paper Drawer: Universal Tray (250 sheets of paper)
Manual Bypass Table
EXPOSURE SYSTEM : Mirror Scanning, Slit Exposure
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
tem
IMAGE TRANSFER
SYSTEM : Visible Image Transfer by meansofa Single-Wire DC Neg- ative Corona with Corotron System
PAPER SEPARATING
SYSTEM : AC Corona with Corotron System, plus Paper Separator Finger
FUSING SYSTEM : Heat Roller
PAPER DISCHARGING
SYSTEM : Charge Neutralizing Brush
MAXIMUM ORIGINAL
SIZE : Metric-A3L; Inch-11” ×17”L (L: Lengthwise)
Paper Drawer
(Automatic feeding) Manual Bypass (Single-sheet feeding)
Medium
Plain paper
(60 to 90 g/m²) ❍❍
Translucent paper – ❍
Transparencies – ❍
Thick paper
(91 to 157 g/m²) –❍
Recycled paper ❍❍
Dimensions
Maximum
(Width ×Length) 297 ×432 mm 297 ×432 mm
Minimum
(Width ×Length) 140 ×182 mm 100 ×140 mm

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
G-8
CONTINUOUS COPY SPEED (copies/min.): Fed from 1st Drawer
L: Lengthwise; C: Crosswise
ZOOM RATIOS
MULTIPLE COPIES : 1 to 99
WARMING-UP TIME : 30 sec. or less with room temperature of 23°C and rated
power voltage
FIRST COPY TIME : A4C or 8-1/2” ×11”C: 7.2 sec. or less
(in Full size Mode using 1st Drawer)
Area Zoom Ratio ×1.00 Area Zoom Ratio ×1.00
Size Size
Metric
A3L
A4L
A4C
B4L
12
15
15
13
Inch
11” ×17” (L)
8-1/2” ×11” (L)
8-1/2” ×11” (C)
5-1/2” ×8-1/2” (L)
11
15
15
15
Fixed
Area Metric Inch
Mode Full Size 100% 100%
Reduction 81% 70%
50%
78%
64%
50%
Enlargement 115% 141%
200%
121%
129%
200%
Variable 50% to 200% (in 1% increments)
LENS : Through Lens (F = 8.0, f = 180 mm)
EXPOSURE LAMP : Halogen Frost Tube Lamp
FUSING
TEMPERATURE :195°C