Minolta PageWorks Pro 20 User manual

Trademark Acknowledgments
PageWorks is a trademark of Minolta in the U.S. and Canada.
Minolta is a registered trademark of Minolta Co., Ltd.
Apple, Macintosh and TrueType are registered trademarks of
Apple Computer Inc.
MS-DOS, Microsoft and Windows are registered trademarks of
Microsoft Corporation in the United States and/or other countries.
IBM is a registered trademark of International Business Machines
Corporation.
Adobe, PostScript and the PostScript logo are trademarks of
Adobe Systems Incorporated.
PCL is a registered trademark of Hewlett-Packard Company.
All other products or name brands are trademarks or registered
trademarks of their respective holders.
Hyou2.fm i ページ ２００３年１１月１８日 火曜日 午前１０時２８分

i
Foreword
Welcome
This PostScript®Set-up Guide describes how to install the Post-
Script®DIMM, expansion memory and PostScript®Printer Soft-
ware for PageWorks 20. Before reading this PostScript®Set-up
Guide, we recommend that you read the User’s Manual for Page-
Works 20. It explains how to set up and operate the printer.
No part of this document may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into other lan-
guages without the express written prior consent from Minolta
Co., Ltd.
The contents of this manual are subject to change without notice.
Customer Support
Customer support for all Minolta PageWorks printer product is
available 24 hours a day, seven days, a week by calling 1-800-459-
3250 (from within North America). Minolta also maintains a web
site which provides printer driver downloads, Frequently Asked
Questions and handles all e-mail requests for technical assistance
at www.minoltaprinters.com.
Please be prepared to provide the following information when con-
tacting Minolta Customer Support:
•Model name
•Serial number
•A detailed description of the problem
•Any message displayed on the LCD panel
For questions or problems with instruction, please be prepared to
provide the following additional information:
•Brand name and model number of the computer
•Type of processor
•Type of operating system
•Amount of installed RAM
fwd.fm i ページ ２００３年１１月１８日 火曜日 午前１０時２７分

ii
Foreword
Software License Agreement
Important:
Before installing the software please carefully read this License
Agreement. The installation of this software indicates your accep-
tance of the terms and conditions of this License. If you do not
agree with the terms and conditions, you should return the soft-
ware to Minolta Corporation for a full refund.
Ownership:
Your license confers no title or ownership in the Software and
should not be construed as a sale of any right in the Software.
Minolta’s third party suppliers may protect their rights in the event
of any violation of these terms. You are expressly notified that
Adobe Systems Incorporated, a California corporation located at
1585 Charleston Road, Mountain View, California 94043
(“Adobe”) is a third-party beneficiary to this License.
The License permits you to:
1. Use this software in the conduct of business with out limit when
the software is used with the intended Minolta Product.
2. SOFTWARE: You may install and use the SOFTWARE on a
computer to which the Minolta Printer is attached.
The following uses are not permitted:
1. Making of alterations to the software
2. Right to grant sub-license, leases or other rights to others
3. Merge this software product or any portion of it into another
product or program
4. You may not reverse engineer, decompile, or disassemble the
software
fwd.fm ii ページ ２００３年１１月１８日 火曜日 午前１０時２７分

iii
Foreword
Export Requirements:
You may not export or re-export the software or any copy or adap-
tation in violation of any applicable laws or regulations
Notes:
By installing this software you acknowledge that you have read
this agreement, understand it and agree to be bound by its
terms and conditions. You further agree that this is the complete
and exclusive statement of the agreement between us and super-
sedes any proposal or prior agreement either oral or written,
and any other communication between us relating to the subject
matter of this agreement. You further agree that if Minolta Cor-
poration is required to engage in any proceeding, legal or other-
wise to enforce its rights under this agreement, Minolta
Corporation shall be entitled to recover from Licensee, in addi-
tion to any other sums due, reasonable Attorney fees, cost and
disbursements.
For the U.S. and Canada only
fwd.fm iii ページ ２００３年１１月１８日 火曜日 午前１０時２７分

iv
Foreword
Limited Software Warranty
Limited Warranty
Minolta warrants that the software will perform in accordance with
the accompanying written materials for a period of (90) ninety
days from the date of purchase. Minolta does not warrant that the
operation of the program will meet your requirements. This lim-
ited warranty gives you specific legal rights. You may have others,
which vary from state/jurisdiction to state/jurisdiction.
Purchasers Remedies
Minolta’s entire liability and your exclusive remedy with respect to
the software shall be at Minolta’s option either, repair or replace-
ment of the software. The software must be returned to Minolta
with a copy of your proof of purchase. The Limited Warranty is
void if failure of the software has resulted from accident, abuse, or
misapplication. Any replacement software will be warranted for
the remainder of the original warranty period or (30) thirty days,
whichever is longer.
The remedies provided herein are customer’s sole and exclusive
remedies. In no event shall Minolta Corporation be liable for
any lost profits, direct, indirect, special, incidental, or conse-
quential damages, whether based on contract, tort, or any other
legal theory.
fwd.fm iv ページ ２００３年１１月１８日 火曜日 午前１０時２７分

v
Foreword
PostScript®DIMM Warranty
Warranty Term
The PostScript®DIMM has a (1) One Year Warranty. The Post-
Script®DIMM must be returned to Minolta for repair or replace-
ment at Minolta’s discretion.
Warranty Coverage
Minolta Corporation warrants this product to be free from defects
in workmanship and materials for a period of one year from the
date of receipt of the unit. If the unit fails to function as written in
the User’s Guide, Minolta will repair or replace the unit at no
charge. Minolta will ship at their expense an exchange unit over-
night to replace the defective unit.
The remedies provided herein are the customers sole and exclusive
remedies. In no event shall Minolta Corporation be liable for any
lost profits, direct or indirect, special, incidental, or consequential
damages, whether based on contract, tort, or other legal history.
About PostScript®features
The Adobe PostScript DIMM provides the following features:
- Support for PostScript Level 2
- 35 Type 1 Fonts
IMPORTANT
•When installing the PostScript®DIMM, be sure to install 8MB
of SIMM included in the PostScript®DIMM kit.
fwd.fm v ページ ２００３年１１月１８日 火曜日 午前１０時２７分

vi
Contents
CONTENTS
HardWare Set-Up
Setting Up ............................................................... 1
Windows 95
Introduction .......................................................... 11
System Requirements ......................................... 11
Installing the Software......................................... 12
Removing the software........................................ 18
Windows 3.1
Introduction .......................................................... 19
System Requirements ......................................... 19
Installing the Software......................................... 20
Removing the software........................................ 26
Macintosh
Introduction .......................................................... 29
System Requirements ......................................... 29
Installing the Software......................................... 30
Installing Screen Fonts........................................ 40
fwd.fm vi ページ ２００３年１１月１８日 火曜日 午前１０時２７分

11
Windows 95
Windows 95
Introduction
The Minolta PageWorks 20 PostScript Printer Software allows you
take full advantage of your printer’s features and capabilities using
your computer running Windows 95. This chapter describes how to
install this software while explaining the software’s features.
System Requirements
The following list contains the system requirements necessary for
optimal operation of the Minolta PageWorks 20 PostScript Printer
Software.
•Operating System: Microsoft Windows 95.
•Personal Computer: IBM-compatible PC with at least a 486SX
33Mz CPU, or faster CPU (Pentium processor recommended).
•I/O Interface: Standard PC parallel printer port and cable.
•Memory: At least 12MB PC RAM (16MB recommended).
•Free Hard disk Space: Approximately 2MB for files.
•Disk Drive: 3.5-inch drive with 1.4MB capacity is required for
installation only.
•Display: VGA (640 x 480-dot) or higher resolution.
NOTE
•Use of a poor quality parallel cable may adversely affect the
input.

12
Windows 95
Windows 95
Installing the Software
NOTE
1. Turn on the printer.
2. Turn on your computer and start up Windows 95.
3. Insert the diskette labeled PageWorks 20 PostScriptPrinter
Software for Windows95 2/2 into one of your computer's
disk drives. For this example, we will assume that the diskette is
located in drive A:\.
4. Click the Start button, click Settings, and then click Printers.
5. Double-click the Add Printer icon.
•Make sure that the printer is connected to your computer with
the recommended parallel cable.

13
Windows 95
Windows 95
6. Click the Next > button to display the next dialog.
7. Select Local printer if the printer is connected directly to your
computer or Network printer if the printer is connected through
a network.
NOTE
8. Click the Next > button to display the next dialog.
•If your printer is connected to a Network, we recommend
consulting your network administrator and referring to the
Network Interface Card Manuals.

14
Windows 95
Windows 95
9. Click Have Disk….
10. Select the drive where PageWorks 20 PostScriptPrinter
Software for Windows95 2/2 is located (A:\ in this example)
and then click the OK button.

15
Windows 95
Windows 95
11. Select Minolta PageWorks 20 -PS and then click the Next >
button.
12. Select an appropriate port and then click the Next > button.

16
Windows 95
Windows 95
13. Select Yes to use the printer as the default printer or No if you
do not want to use it as the default printer.
14. If you wish, rename the printer and then click the Next > button.
To proceed without renaming the printer, click the Next > but-
ton without changing the name.
15. Select Yes (recommended) to print a test page or No if you
want to proceed without printing a test page.
16. Click the Finish button and the installer will start copying the files.

17
Windows 95
Windows 95
17. While copying the files, the window that asks you to insert the
disk labeled Windows 95 appears. Then, insert the appropriate
floppy diskette or CD-ROM into the drive and click the OK but-
ton.
The icon of the installed printer will appear inside the Printers
folder after installation is complete.

18
Windows 95
Windows 95
Removing the Software
NOTE
1. Turn on your computer and start up Windows 95.
2. Click the Start button, click Settings, and then click Printers.
3. Click Minolta PageWorks 20 -PS.
4. Click File and then Delete.
5. Click Yes to remove the printer software.
6. Click Yes to delete all files related to the Minolta PageWorks 20
PostScript Printer Software.
•Before removing the Minolta PageWorks 20 -PS printer
software, be sure to close all application software you are using.

19
Windows 3.1
Windows 3.1
Introduction
The Minolta PageWorks 20 PostScript Printer Software was
provided by Adobe Systems Incorporated, and allows you take full
advantage of your printer's features and capabilities using your
computer running Windows 3.1. This chapter describes how to
install this printer driver while explaining the driver’s features.
System Requirements
The following list contains the system requirements necessary for
optimal operation of the Minolta PageWorks 20 PostScript Printer
Software.
•Operating System: Microsoft Windows 3.1 or later.
•Personal Computer: IBM-compatible PC with at least a 386DX
16Mz CPU, or faster CPU (Pentium processor recommended).
•I/O Interface: Standard PC parallel printer port and cable.
•Memory: At least 4MB PC RAM (8MB recommended).
•Free Hard disk Space: Approximately 2MB for files.
•Disk Drive: 3.5-inch drive with 1.4MB capacity is required for
installation only
•Display: VGA (640 x 480-dot) or higher resolution.
NOTE
•Use of a poor quality parallel cable may adversely affect the
input.
win31.fm 19 ページ ２００３年１１月１８日 火曜日 午前１０時２９分

20
Windows 3.1
Windows 3.1
Installing the Software
NOTE
1. Turn on the printer.
2. Turn on your computer and start up Windows 3.1.
3. Insert the diskette labeled PageWorks 20 PostScriptPrinter
Software for Windows3.1 into one of your computer's disk
drives. For this example, we will assume that the diskette is
located in drive A:\.
4. From the Program Manager, double-click Main to display the
Main group, and then double-click File Manager.
•Make sure that the printer is connected to your computer with
the recommended parallel cable.
win31.fm 20 ページ ２００３年１１月１８日 火曜日 午前１０時２９分

21
Windows 3.1
Windows 3.1
5. Open the drive A:\ window, then double-click the Setup.exe
icon to start up the installer.
6. Click the Read button to open the ReadMe file for Adobe PS3
for Windows 3.1, then read the document.
win31.fm 21 ページ ２００３年１１月１８日 火曜日 午前１０時２９分

22
Windows 3.1
Windows 3.1
7. Select Exit from the File menu on the ReadMe screen to return
to the PostScript Printer Driver Setup dialog box.
8. Click the Continue button to start installing the printer driver.
win31.fm 22 ページ ２００３年１１月１８日 火曜日 午前１０時２９分