Minolta MS6000 MK II User manual

0820-7724-02 K
0820-7724-02 2008.10
Copyright
2008 KYOKKO SEIKO CO., LTD.
MS6000 MKII
User’s Guide

Hyou2.fm 1 ページ ２００８年３月１３日 木曜日 午後２時３８分

P-i
SAFETY INFORMATION
This section contains detailed instructions on the operation and maintenance of this
machine. To achieve optimum utility of this device, all operators should carefully
read and follow the instructions in this manual. Please keep this manual in a handy
place near the machine.
Make sure you observe all of the precautions listed in this manual.
*Ver07
Please note that some parts of the contents of this section may not correspond with the purchased product.
Warning and Precaution Symbols
Ignoring this warning could cause serious injury or
even death.
Ignoring this caution could cause injury or damage
to property.
Meaning of Symbols
A triangle indicates a danger against which you should take precaution.
This symbol warns against cause burns.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.

SAFETY INFORMATION
P-ii
• Do not modify this product, as a fire, electrical shock, or break-
down could result. If the product employs a laser, the laser beam
source could cause blindness.
• Do not attempt to remove the covers and panels which have been
fixed to the product. Some products have a high-voltage part or a
laser beam source inside that could cause an electrical shock or
blindness.
• Only use the power cord supplied in the package. If a power cord
is not supplied, only use the power cord and plug that is specified
in POWER CORD INSTRUCTION. Failure to use this cord could
result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine
and NEVER use it for any other product. Failure to observe this
precaution could result in a fire or electrical shock.
• Use only the specified power source voltage. Failure to do that
could result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appli-
ances or machines. Use of a power outlet for more than the
marked current value could result in a fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an
electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do
this could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend,
pull on, or damage the power cord. Use of a damaged power cord
(exposed core wire, broken wire, etc.) could result in a fire or
breakdown.
Should any of these conditions be found, immediately turn OFF
the power switch, unplug the power cord from the power outlet,
and then call your authorized service representative.
• Do not use an extension cord, in principle. Use of an extension
cord could cause a fire or electrical shock. Contact your autho-
rized service representative if an extension cord is required.

SAFETY INFORMATION
P-iii
Do not place a flower vase or other container that contains water, or
metal clips or other small metallic objects on this product. Spilled
water or metallic objects dropped inside the product could result in a
fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter
get inside the product, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your
authorized service representative.
• Do not keep using this product, if this product becomes inordi-
nately hot or emits smoke, or unusual odor or noise. Immediately
turn OFF the power switch, unplug the power cord from the power
outlet, and then call your authorized service representative. If you
keep on using it as is, a fire or electrical shock could result.
• Do not keep using this product, if this product has been dropped
or its cover damaged. Immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your
authorized service representative. If you keep on using it as is, a
fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot
toner may scatter and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a
grounding terminal.

• Do not use flammable sprays, liquids, or gases near this product,
as a fire could result.
• Do not leave a toner unit or drum unit in a place within easy reach
of children. Licking or ingesting any of these things could injure
your health.
• Do not let any object plug the ventilation holes of this product.
Heat could accumulate inside the product, resulting in a fire or
malfunction.
• Do not install this product at a site that is exposed to direct sun-
light, or near an air conditioner or heating apparatus. The resultant
temperature changes inside the product could cause a malfunc-
tion, fire, or electrical shock.
• Do not place the product in a dusty place, or a site exposed to
soot or steam, near a kitchen table, bath, or a humidifier. A fire,
electrical shock, or breakdown could result.
• Do not place this product on an unstable or tilted bench, or in a
location subject to a lot of vibration and shock. It could drop or fall,
causing personal injury or mechanical breakdown.
• After installing this product, mount it on a secure base. If the unit
moves or falls, it may cause personal injury.
• Do not store toner units and PC drum units near a floppy disk or
watch that are susceptible to magnetism. They could cause these
products to malfunction.
The inside of this product has areas subject to high temperature,
which may cause burns. When checking the inside of the unit for
malfunctions such as a paper misfeed, do not touch the locations
(around the fusing unit, etc.) which are indicated by a “CAUTION
HOT” caution label.
Do not place any objects around the power plug as the power plug
may be difficult to pull out when an emergency occurs.
The socket-outlet shall be installed near the machine and shall be
easily accessible as the power plug may be difficult to pull out when
an emergency occurs.
SAFETY INFORMATION
P-iv

• Always use this product in a well ventilated location. Operating the
product in a poorly ventilated room for an extended period of time
could injure your health. Ventilate the room at regular intervals.
• Whenever moving this product, be sure to disconnect the power
cord and other cables. Failure to do this could damage the cord or
cable, resulting in a fire, electrical shock, or breakdown.
• When moving this product, always hold it by the locations speci-
fied in the operator’s manual or other documents. If the unit falls it
may cause severe personal injury. The product may also be dam-
aged or malfunction.
• Remove the power plug from the outlet more than one time a year
and clean the area between the plug terminals. Dust that accumu-
lates between the plug terminals may cause a fire.
• When unplugging the power cord, be sure to hold onto the plug.
Pulling on the power cord could damage the cord, resulting in a
fire or electrical shock.
SAFETY INFORMATION
P-v
Precautions for Routine
• Do not store toner units, PC drum units, and other supplies and
consumables in a place subject to direct sunlight and high temper-
ature and humidity, as poor image quality and malfunction could
result.
• Do not attempt to replace the toner unit and PC drum unit in a
place exposed to direct sunlight. If the PC drum is exposed to
intense light, poor image quality could result.
• Do not unpack a toner unit or PC drum unit until the very time of
use. Do not leave an unpacked unit standing. Install it immediately
or poor image quality could result.
• Do not keep toner units and PC drum units in an upright position
or upside down, as poor image quality could result.
• Do not throw or drop a toner unit or PC drum unit as poor image
quality could result.
• Do not use this product in an area where ammonia or other gases
or chemicals are present. Failure to do so may shorten the service
life of the product, cause damage or decrease performance.
• Do not use this product in an environment with a temperature out-
side the range specified in the operator’s manual, as a breakdown
or malfunction could result.
• Do not attempt to feed stapled paper, carbon paper or aluminum
foil through this product, as a malfunction or fire could result.

SAFETY INFORMATION
P-vi
Do not touch or scratch the surface of the toner unit developing roller
and the PC drum, as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use
of any supply or consumable not recommended could result in poor
image quality and breakdown.

i
Welcome
This User’s Guide explains how to operate the unit and replenish its supplies. It also gives
some troubleshooting tips as well as general precautions to be observed when operating the
unit.
To ensure the best performance and effective use of your unit, read this User’s Guide carefully
until you familiarize yourself thoroughly with the unit's operation and features.
Please keep this User’s Guide and use it as a quick and handy reference tool for immediately
clarifying any questions that may arise.
Please follow the instructions given in this User’s Guide when handling the system and do not
touch any part of the system the User’s Guide does not cover.
NEVER attempt to disassemble or remodel the system.
The contents of this User’s Guide are subject to change without notice.
No part of this User’s Guide may be quoted, reproduced, or translated into any other language.

ii
Notes to Operators and Key Operators
The following safety rules should be observed:
[1] The unit should be kept free from moisture, dirt, dust and exposure to heat and direct sun-
light at all times.
[2] Keep hands, hair and clothing away from rollers and other moving parts.
[3] Before removing the Projection Lamp Unit, confirm that the machine is turned “OFF”.
[4] Be sure that the proper voltage is used and that the machine is well grounded. The use of
electrical extension cords is strongly discouraged.
[5] For best performance, only our authorized supplies are recommended for use with this
unit. Failure to use our authorized supplies may cause damage to the unit, in which case
the warranty may be rendered void.
[6] Do not attempt to remove any Cover that is secured.
FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause un-
desired operation.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
The design and production of this unit conforms to FCC regulations, and any changes or
modifications must be registered with the FCC and are subject to FCC control. Any changes
made by the purchaser or user without first contacting the manufacturer will be subject to
penalty under FCC regulations.

Notes to Operators and Key Operators
iii
Interference-Causing Equipment Standard (ICES-003 ISSUE 4)
(For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
CE Marking (Declaration of Conformity) (For European Users)
This product complies with the following EU directives:
2006/95/EC and 2004/108/EC directives.
This declaration is valid for the area of the European Union(EU) only.
This device must be used with shielded interface cable and shielded network cable.
The use of non-shielded cable is likely to result in interference with radio communications and
is prohibited under rules.
Acoustic Noise
Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure level at the operator po-
sition according to EN27779 is equal to or less than 70dB (A).

iv
Safety Information (MSP 3500 Printer)
Laser Safety
This printer is a page printer which operates by means of a laser. There is no possibility of
danger from the laser, provided the printer is operated according to the instructions provided
in this manual.
Since radiation emitted by the laser is completely confined within protective housing and ex-
ternal covers, the laser beam cannot escape from the machine during any phase of user oper-
ation.
This printer is certified as a Class 1 laser product: This means that the printer does not produce
hazardous laser radiation.
Internal Laser Radiation
Maximum Average Radiation Power 37 µW at laser Aperture of mirror unit
Wave Length 770-800 nm
This product employs a Class IIIb Laser Diode that has an invisible laser beam. The Laser Di-
ode and Scanning Polygon Mirror are incorporated in the print head unit.
The print head (in the interior of the printer in front of the toner cartridge) consists of the print
head unit and the mirror unit. The laser beam is emitted from the print head unit, passes
through the mirror unit, then is radiated through the laser aperture of the mirror unit to the in-
terior of the printer.
WARNING Laser
Aperture
Print
Head
Unit
Mirror Unit
The print head unit is NOT A FIELD SER-
VICE ITEM. Therefore, the print head unit
should not be opened under any circum-
stances.

Safety Information (MSP 3500 Printer)
v
For United States
CDRH Regulations
This printer is certified as a Class I laser product under the Regulation Performance Standard
according to the Food, Drug, and Cosmetic Act of 1990.
Compliance is mandatory for laser products marketed in the United States, and is reported to
the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Admin-
istration (FDA) of the Department of Health and Human Services (DHHS). This means that
the product does not produce hazardous laser radiation.
The label shown below indicated compliance with the CDRH regulations and must be at-
tached to laser products marketed in the United States.
CAUTION: Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 15mW, and the
wavelength is 770-800 nm.
All other users
WARNING: Use of controls, adjustments of performance or procedures other than those
specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 15mW, and the
wavelength is 770-800 nm.
For Denmark
ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funk-
tion. Undgå udsttelse for stråling.
Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene.

Safety Information (MSP 3500 Printer)
vi
For Finland, Sweden
VAROITUS!: Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla
saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING: Om apparaten används på annat sätt än i denna bruksanvisning specificerats,
kan använderen utsattasr för osynling laserstrålnig, som överskrider gränsen för laserklass
1.
VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina nakymattomalle laser-
sateilylle. Aja katso sateeseen.
VARNING: Osynlig laserstråining när denna del är öppnad och spärren är urkopplad. Be-
trakta ej stråien.
For Norway
ADVARSEL: Dersum apparatet brukes på annen måte enn spesifisert i denne bruksanvis-
ning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser
klasse 1.
Dette er en halvleder laser. Maksimal effeckt til laserdiode er 15mW, og bolgelengde er
770-800 nm.

Safety Information (MSP 3500 Printer)
vii
WARNING LABEL
• Three laser caution labels are attached to the inside of the machine as shown below.

Safety Information (MSP 3500 Printer)
viii
OZONE RELEASE (For all Users)
During printer operation, a small quantity of ozone is released. This amount is not large
enough to cause any adverse affects or harm. However, be sure the room where the machine
is being used has adequate ventilation, especially if you are printing a high volume of materi-
als, or if the machine is being used continuously over a long period.
WARNING LABEL
• A laser safety label is attached to the outside of the machine as shown below.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT

ix
Safety Information (MSP 3000 Printer)
Laser Safety
This printer is a page printer which operates by means of a laser. There is no possibility of
danger from the laser, provided the printer is operated according to the instructions provided
in this manual.
Since radiation emitted by the laser is completely confined within protective housing, the laser
beam cannot escape from the machine during any phase of user operation.
Internal Laser Radiation
Maximum Radiation Power: 8.8 ×10-4(W)
Wave Length: 770-810 (nm)
This is a Class IIIb Laser Diode Assy. that has an invisible laser beam. The print head unit is
NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not be opened under
any circumstances.
For United States
Laser Safety
This printer is certified as a Class 1 Laser product under the U.S. Department of Health and
Human Service (DHHS) Radiation Performance Standard according to the Radiation Con-
trol for Health and Safety Act of 1968. This means that the printer does not produce hazardous
laser radiation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Ad-
ministration implemented regulations for laser products on August 2, 1976. These regulations
apply to laser products manufactured from August 1. Compliance is mandatory for products
marketed in the United States. The label shown below indicates compliance with the CDRH
regulations and must be attached to laser products marketed in the United States.
WARNING: Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
All other users
WARNING: Use of controls, adjustments of performance or procedures other than those
specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 8.8 ×10-4W and
the wavelength is 770-810 nm.

Safety Information (MSP 3000 Printer)
x
For Denmark
ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funk-
tion. Undgå udsttelse for stråling.
Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene.
For Finland, Sweden
VAROITUS!: Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla
saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING: Om apparaten används på annat sätt än i denna bruksanvisning specificerats,
kan använderen utsattasr för osynling laserstrålnig, som överskrider gränsen för laserklass
1.
VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina nakymattomalle laser-
sateilylle. Aja katso sateeseen.
VARNING: Osynlig laserstråining när denna del är öppnad och spärren är urkopplad. Be-
trakta ej stråien.

Safety Information (MSP 3000 Printer)
xi
For Norway
ADVARSEL: Dersum apparatet brukes på annen måte enn spesifisert i denne bruksanvis-
ning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser
klasse 1.
Dette er en halvleder laser. Maksimal effeckt til laserdiode er 8.8 ×10-4W og bolgelengde
er 770-810 nm.
WARNING LABEL

Safety Information (MSP 3000 Printer)
xii
OZONE RELEASE (For all Users)
During printer operation, a small quantity of ozone is released. This amount is not large
enough to cause any adverse affects or harm. However, be sure the room where the machine
is being used has adequate ventilation, especially if you are printing a high volume of materi-
als, or if the machine is being used continuously over a long period.
WARNING LABEL