Mira DTX-1 User manual
)9= 4]NIN_NSL +TTI )JYT]NKNJW 2JFY +WZNY FSI ;JLJYFGQJ
<FXM 2FHMNSJ
MANUAL
GENERAL INFORMATION
%59'PPE%FUPYJGJFS is a portable device that can be used for the disinfection of
microorganisms in water and antibacterial cleaning of food and household
items. The operating principle of the device is based on the removal of various
types of contaminants by ultrasonic waves, followed by their splitting and
dissolution in water.
MANUAL OF DEVICE
1. On / o button.
2. Type C power connector.
3. Status indicator.
4. Touchscreen.
5. Workspace.
6. Limit of the maximum
permissible water level.
5
6
3
4
PACKAGE CONTENTS
•%59'PPE%FUPYJGJFS- 1 pc.
• Instructions and warranty card - 1 pc.
• Packaging — 1 pc.
• Power Supply - 1 pc.
• USB Type C wire - 1 pc.
1
2
10
MAX
PRINCIPLE OF OPERATION
1. Fill a deep container with water and
place the products to be treated.
2. Turn on %59 'PPE %FUPYJGJFS and set
the required treating settings (see the
CONTROL section). Do not start the treatment
process if the device is not submerged in
water!
3. Submerge the appliance in the water
containing food. Make sure that the water
level does not exceed the mark on
the body of the device. Drain o some of
the water if necessary.
4. Press the START button and wait for the
appliance to clean the food.
5. After cleaning is complete, put the
appliance aside, drain the water and
rinse the food.
4
5
3
2
1
11
CONTROL
To turn on the device, press and hold the power button for 3 seconds. When turned
on, the indicator will turn green, and the display will show the main menu.
1
2
Select automatic
or manual
1. AUTOMATIC MODE
In automatic mode, 4 processing programs are provided:
1.1. Raw food treatment
1.2. Processing raw foods before thermal
treatment (boiling, baking, frying,
etc.)
1.3. Antiparasitic treatment
1.4. Treatment of various household items
(jewelry, keys, children's toys, etc.)
1
3
4
1.1. Raw food treatment
1.2. Processing raw foods before thermal
1.3. Antiparasitic treatment
1.4. Treatment of various household items
1.1
1.2
1.3
1.4
12
PQFSBUJOHNPEFJOUIFNBJONFOV
1.1. RAW FOOD TREATMENT
When treating raw food, a list of food types opens:
• Vegetables
• Fruits
• Berries
• Greens
• Mushrooms
• Meat
• Fish
• Seafood
• Groats
In the list, select the required type of treated products and click the corresponding
button.
Do not start the treatment process if the device is not submerged in water!
1.2. LAUNCHING
After selecting the treating program, you should submerge the device in water with
food (as indicated on the device screen] and press the START button. The indicator
will turn red, and the display will show the cleaning treatment and the remaining
time. When nished, the indicator will turn green and FINISH lettering will appear on
the display.
Attention! The water level in the container should not exceed the mark
as specied on the exterior of the device.
MAX
13
MAX
2. MANUAL MODE
In manual mode, you can adjust the intensity and duration of exposure to active
oxygen and ultrasonic waves. To do this, in the corresponding menu item, you should
set the required values using the buttons and .
2.1. LAUNCHING
After setting the processing parameters, it is necessary to lower the device into water
with food, check the set values and press the START button. The indicator will turn
red, and the display will show the cleaning treatment being applied and the
remaining time. When nished, the indicator will turn green and the word FINISH will
appear on the display.
Attention! The water level in the container should not exceed the mark
as specied on the exterior of the device. Do not start the treatment process if the
device is not submerged in water!
and .
14
3. SETTINGS
The following options are available in the settings section:
• Changing theme
• Changing language (English, Russian, Spanish, French,
German and Polish are supported)
• Active oxygen shutdown function (treatment is performed only by
ultrasound]. The indicator in the upper right corner of the screen informs
about status of this parameter (on - ; o - ].
about status of this parameter (on - ; o - ].
about status of this parameter (on - ; o - ].
15
1
2
4. ABOUT
The About section contains the manufacturer's contact information.
DEVICE MAINTENANCE
The device requires no special maintenance. If the base of the working part is
contaminated, you can easily remove it and wash it under running water or in the
dishwasher.
Getting moisture on the (USB Type C) power connector should be avoided if possible.
The device must be submerged in water as indicated in the manual to prevent
damage.
STORAGE AND TRANSPORTATION
1. Transportation and storage temperatures should be from -60°C to 45°C, with
relative humidity of up to 95%, and the packaging should be protected from direct
sunlight and moisture.
2. The service life of the device is 5 years and is subject to operating conditions.
16
SAFETY
1. Read this user manual before using the appliance.
2. Use the device only for its intended purpose, as specied in the instruction manual.
3. Place the device on a at surface. When using the device, it is necessary to avoid
shaking it and dropping it to prevent damage to the working parts.
4. Direct moisture should be avoided on the power connectors.
5. Do not use the device in rooms with aggressive or explosive mixtures of chemicals.
6. Connect the device only to a power supply with a voltage corresponding to that
indicated on the marking.
7. Do not submerge the device in water below the permissible level.
8. Do not start treatment by the device if is not properly submerged in water.
In case of non-compliance with the recommended operating procedures, safety
becomes compromised.
WARRANTIES
1. The warranty period for the device is 12 months from the date of sale through a
retail network. In the absence of a mark from the trading organization, the
warranty period starts from the date of manufacture of the product. The month
and year of manufacture of the purier can be found in the warranty certicate.
2. All rechargeable batteries are consumable items that degrade as they chemically
age. Consumables are not covered by the warranty.
3. Warranty repairs are carried out by the manufacturer.
4. Claims for products that have damage that dier from natural traces of use are not
accepted.
5. Failure of the device, which is operated in violation of safety, is not covered by the
warranty.
DISPOSAL
This symbol indicates that this product and / or battery should not be
disposed of with household waste. Dispose of the appliance in
accordance with local laws and regulations.
17
ATTENTION! Read this entire manual before using the device. Pay particular
attention to sections containing this symbol.
Standards compliance:
ISO 9001: 2015, ISO 14001: 2015, ISO 45001: 2018,
TR CU 004/2011, TR CU 020/2011, TR EEU 037/2016
TESTED IN
Laboratory
TESTED IN
Switzerland
Laboratory
ISO 9001: 2015 ISO 14001: 2015 ISO 45001: 2018
74
Manufactured and accepted in accordance with Technical Specication
ISO 9001: 2015; ISO 14001: 2015; ISO 45001: 2018 and recognised as suitable for operation.
Head of QC department signature
print full name
day, month, year
ACCEPTANCE CERTIFICATE
%59'PPE%FUPYJGJFS
Manufacturing date
QC department representative
day, month, year
QC stamp
Date of sale
Seller
Seal
Seal
signature
TO BE FILLED BY MANUFACTURER
TO BE FILLED BY RETAILER
WARRANTY CERTIFICATE
%59'PPE%FUPYJGJFS
MIRA Safety LLC 7301 N FM
620 RD,STE 155 #259
Austin, TX 78726
Table of contents
