Miracle The Sing M200 User manual

www.doorskorea.com
M200
더 씽
☎ [phone]
Yeomgwang na-dong, 27, Mangu-ro 81-gil, Jungnang-gu, Seoul, Republic of Korea
USER GUIDE
This device has completed a conformity test for business use,
and radio interference can occur
Please read this manual carefully and follow directions.
Please keep this manual for future use.

①
②
③
Information for initial use
POWER ON: P ress and hold the POWER button. The product powers on when the LED
is activated with a guide sound.
(You can POWER on with the remote control when connected to the charger)
Connect to Bluetooth: You can connect with the Bluetooth function on your smartphone.
(See related page 4)
Play Music: You can play music by running smartphone applications.
Adjust volume :
You can adjust the volume and Echo with remote control or the
button on the speaker unit.
Connect MICs: The MICs connects to the speaker automatically when the speaker
Powers on. (If your speaker connection fails to auto connect, you can re-connect
with a different frequency.)
Dual MICs: You can use as dual MICs by powering on MICs separately.
(It can also be used for a lectures and meetings.)
POWER OFF:
Press and hold POWER button on the remote control or main unit.
Use AUX cable: You can deliver external or internal sound with Aux cable included.
Charge: You can charge the speaker main unit with a C-type charger connected to
the product. (only 1.8A or above, Charger included.)
Various use :
This unit has many features, such as, karaoke, lectures, meeting or
presentations.
Smartphone application compatability : The product can be used for playing music
or sound effects with various Smartphone
applications.
MP3 playing with USB memory stick :
You can play MP3 files contained in a USB
memory stick.
How to Use Summary
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
The Battery requires full charge before using for the first time.
C-Type charger with up to 1.8A is required for charging, Included.
When battery is depleted, the battery and circuit protection function is activated.
It will lower the volume to base level or shut down the base unit. You can continue
to use this device when the battery is depleated by connecting to the charger.
BLUETOOTH MICROPHONE & HIFI SPEAKER M200 01

※ Display battery charging level : Approx
※ Time required for charging is subject to battery level / charging method / charging
circumstances.
※ The battery circuit protection function will be activated when battery balance is lower than
60%.
- 0~30% - 30~70% - 70~100%
Charging the product
①
②
③
④
⑤
⑥
The battery is embedded in the speaker main unit. The MICs uses AA-type batteries.
Please fully charge the speaker unit when first using the unit the first time, it has
not been charged at the factory.
You should turn the product off during charging to fully charge.
·
·
·
Caution
A audio feedback can occur if you use the MICs and speakers too close to one another.
When using the Bluetooth function, the distance between devices should be less
than
10m.
Keep out of reach of children or animals and do not use in humid conditions or when in
water, ie. hot tubs, pools or bodies of water.
Dropping the product could cause severe damage or malfunction.
Do not use the product near heating equipment, fire or other hot items, to do so could
cause severe damage to the product.
Please maintain a tempature between -10~40˚C when charging the product.
·
·
·
·
·
·
: 1.5 ~ 4 hours
Required time
to charge
(It depends on battery balance
or charger capacity)
: 1.5 ~ 4 hours
Operating
time
(It depends on battery balance,
volume and MIC usage)
★Please check
the socket
direction when
charging!
The product should remain off when charging for faster charging
times.
Connect C-type charger to the charging socket. (Included in the product
package)
Charging will begin when the battery level display on the LED screen
gradually blinks.
All three blocks on the battery level display on the LED screen will
show when fully charged.
It takes Approx. 1.5 to 4 hours to be fully charged. Blinking LED will stop when fully charged.
You can use 1.5 to 4 hours continuously after beings fully charged.
Approx
Approx
BLUETOOTH MICROPHONE & HIFI SPEAKER M200 02

How to use the Microphone
Press and hold the POWER button on the MICs to turn on the MICs.
The frequency channel will automatically connect, the LED screen
on the MICs will be on. (You should change the channel when the
channel
shows OFF or there is no sound)
The MICs is connected if the channel is displayed on the LED
screen and the ‘A-ON’ letter is displayed on the LED screen of
the MICs.
①
②
③
Turn on the MICs & LED display information
STEP 1 STEP 6 Back to STEP 1
Click 1 Click 6 Click 7
‘SEL’ blinks when SET button is pressed and is held on the MIC.
You can move to the next channel every time you press the
SET button.
If you stop at the channel you like, the channel is automatically
selected and it attempts to connect with base.
When the connection is successful a sound occurs after the channel number on the
MIC display is fixed on ‘A-ON’.
①
②
③
④
You can adjust the volume level by pressing
the SET button on the MICs briefly.
The volume can be adjusted from level
1 to 6.
①
②
SET
Press&hold
SET button
SET
Press SET
button briefly
STOP at
selected
channel
Attempt to
connect to
speaker
When
connected,
the channel
number is fixed
Display
A-ON on
the speaker
LED display
Connected
to changed
channel
Speaker
sound
output
How to change the frequency channel
Adjust MICs volume
To open the battery compantment by turning the bottom of the MIC.
Put AA-type batteries into each side as described in the figure on the right and close the cover.
①
②
Changing the battery in the MICs
Battery not included
with this product
SET
SET
(Two(2) AA-type batteries are required per MIC)
1
234
BLUETOOTH MICROPHONE & HIFI SPEAKER M200 03
※The frequency of the MIC
may vary depending on the
country of residence of the
user. Please refer to the last
page of the User’s Guide※

1
2
3
4
5
How to pair Bluetooth
Pair The Sing M200 with Bluetooth function on a smartphone.
The distance between speaker main unit and the phone needs to be 10M or less for good pairing.
If pairing fails, POWER off and restart the speaker and repeat the steps above.
If auto pairing is not supported for certain Smartphone model, please follow the following steps for pairing.
If pairing fails on at the first attempt, check pairings with other devices and release
all pairing, try pairing again.
If you want to pair with onother phone, release existing pairing and pair with another
phone with the following steps.
Do not pair devices where there is a warning of electromagnetic radiation such as hospital
or airplanes and where the use of the product is not permitted.
Noise or abnormal functioning happen due to obstacles such as a wall or partition.
When the Bluetooth pairing is disconnected, a confirmation sound occurs.
·
·
·
·
·
·
·
·
·
How to pair Bluetooth (This procedure is developed based on Android Smartphones.)
★Please refer to How To Use for each device since some devices have different
setup procedure.
★When POWER is on, the speaker is paired to most recently connected device.
Press and hold the POWER button at the side of The Sing M200 speaker main unit
for 3 seconds to POWER on the system. The Bluetooth connection is in ready status
with a confirmation sound.
(When POWER on, the speaker is paired to most recently connected device.)
Push the Bluetooth icon on the Smartphone(Android) to activate the Bluetooth, and
find the devices to add.
Find ‘miracle, M the Sing M200-Bt’ model in the device list. (Push ‘Find’ button to search
the model if the model does not appear in the list.)
When conncected, a confirmation sound occurs.
Press and hold the ‘POWER’ button for 3 seconds after using. The system turns off with
a confirmation sound.
How to connect Bluetooth(Pairing)
You can use lock feature when you press and hold and together.
①
②
③
5
The battery level display shows the change of the battery.
The frequency signal status display shows the communication status between base speaker and MIC.
Information on upper status line and channel lock
*What is Lock Feature? A function to cut out interfering frequencies around the transmission & reception.
BLUETOOTH MICROPHONE & HIFI SPEAKER M200
04

USB
Connection
Status Display
USB Connected
Bluetooth
Connection Display
Display
battery balance
Bluetooth Pairing Mode AUX Cable Connection Mode MICs Channel ON/OFF
MUTE
ECHO+MODEM.VOL+
ECHO-MENUM.VOL-
VOL+
VOL-
RESETAUX OUTPAIR
Mute MusicChange ModePlay/PauseMusic volumeEcho controlEcho controlPOWERMIC volumetreble setting
Speaker mute
AUX OUT connection
Next songPrevious songResetConnect BluetoothON/OFFMusic volumeMIC volumeMIC volume
Information on LED Display on the front side
Information on Buttons on the Remote Control
You can POWER on the product with the remote control when the POWER is supplied
from the external suppliers such as charger or external battery.
- Ready status : Blinking
- Normal connection : Hold
- Charging : Blinking
- Fully charged : hold
BLUETOOTH MICROPHONE & HIFI SPEAKER M200 05

: Press & hold - POWER ON & OFF / Press briefly - Change Mode
: Play / Pause
: Press & hold - Lower the volume / Press briefly - Play previous song
: Press & hold - Increase the volume / Press briefly - Play next song
AUX OUT : Audio output
(The sound from the speaker is delivered to the external device)
AUX IN : Audio input (The speaker plays sounds from external device)
USB : USB input DC5V IN : Charging socket Battery reset hole
Be cautious when connecting to charging socket!
Most of the damages come from this connection!
Press and hold for 3 sec
★POWER ON/OFF★
Mode changed in sequence
when clicking the button
BLUE AUX
(Auto change when
connected in USB mode)
External output device
Connet to AUX IN
Speaker
Connet to AUX OUT
AUX Cable ↔
AUX OUT Socket
AUX Cable ↔
AUX IN Socket
You can amplify the sound by connecting
external devices such as Bluetooth speaker,
Audio device with attached external
output cable(AUX↔AUX).
Connect external speaker
to boost the sound~!
Speaker
Connet to AUX IN
External device
Connet to AUX OUT
Y ou can play music by connecting external devices
such as Smartphone with No Bluetooth function,
Notebook, Computer, etc with attached external
output cable(AUX↔AUX).
Connect external device
to our high-end speaker~!
Information on the speaker functions and Button
Playing music with cables
※
When connecting AUXOUT, sound output will be delivered both from internal and external
speakers. If you want to have sound only from the external speaker, press ‘AUXOUT’ button on
the remote control to mute the internal speaker.
※
Control through the Smartphone directly if the button control to play is not available for the
external device when connecting the external device.
BLUETOOTH MICROPHONE & HIFI SPEAKER M200
06

2 Wireless MICs Remote ControlSpeaker Base Unit
AUX Cable (3.5mm+3.5mm)
Carrying CaseUser's Guide
User’s
GUIDE
Product Component
Specification
Miracle the Sing M200
Model
DC 5V / 7.4V / 2,500mAh
Rated Voltage
Designed by Doors Korea Made in China
5.0
2 X 20W Speakers
1.5 ~ 4hrDoors China
Manufaturer
XU101401-18006A / 18650-2,500mAh
Battery
Product : (W)25cm x (D)9.5cm x (H)6cm / about 980g
BOX : (W)29.5cm x (D)28.5cm x (H)12.5cm / about 2.4kg
(주)도어스코리아 (Doors Korea) / Tel.[phone]
Yeomgwang na-dong, 27, Mangu-ro 81-gil, Jungnang-gu, Seoul, Republic of Korea
Size / Weight
Distributer
Spaker : R-R-DOr-Miracle-M200
MICs : R-R-DOr-Miracle-M900HA
KC
Coutry of Orgin
Bluetooth Ver
Output
Recharge/Usage hr
(Hard sided carrying case)
BLUETOOTH MICROPHONE & HIFI SPEAKER M200
07

BLUETOOTH MICROPHONE & HIFI SPEAKER M200
Frequency information
Korea
Blue MIC ARed MIC B
A01 ~ A10
925.3 ~ 930.7 Hhz
B11 ~ B20
931.9 ~ 937.3 Hhz
Color
Channel No.
Frequency
Japan
Blue MIC ARed MIC B
JA 1 ~ JA 4
806.2 ~ 807.7 Hhz
JB 1 ~ JB 4
808.2 ~ 809.7 Hhz
Color
Channel No.
Frequency
Blue MIC ARed MIC B
U01 ~ U20
902.1 ~ 911.6 Hhz
S21 ~ S40
918.4 ~ 927.9 Hhz
Color
Channel No.
Frequency
Europe(EU)
Blue MIC ARed MIC B
EA 1 ~ EA 4
863.2 ~ 864.7 Hhz
EB 1 ~ EB 4
866 ~ 867.5 Hhz
Color
Channel No.
Frequency
America(US)