Mircom LT-6610 User manual

LT-6610 Rev 1
June 2017
1
Postal Lock Installation
Parts required:
2 x nuts for securing postal lock
2 x screws for postal lock switch
2 x washers for postal lock switch
1 x postal lock switch with cable
1 x switch holder
1 x postal lock window
1 x postal lock plate
1. Disconnect the Power
2. Remove the Card Reader Window
3. Use the 4 Nuts to Secure the Postal Lock Window, Plate, and Switch
Holder
Card reader window
Nuts (x4)
Postal lock window
Nuts (x4)
Postal lock plate
Switch holder

LT-6610 Rev 1
June 2017
2
4. Attach the Switch
5. Attach the Postal Lock
6. Wire the Switch
Wire the postal lock switch to Input 1 with the included cable.
Note: Do not wire the switch until after the postal lock is installed.
Postal lock switch
Washers (x2)
Screws (x2)
Postal lock
Nuts (x2)