Mistral MAT10A-SP User manual

Bluetooth Turntable
Model: MAT10A-SP
Instruction Manual

2
Safety Precautions
To ensure the proper operation, all
the safety and operating instructions
should be read carefully before
connection and operation.
Warnings:
• Read all of the instruction before using this
appliance and keep this manual in a safe
place for future reference.
• Read and keep these instructions. Heed all
warnings and follow all instructions.
• To avoid electric shock, do not open the
cabinet, refer servicing to qualied personnel
only.
• To reduce the risk of re or electric shock, do
not expose the unit to rain or moisture.
• The apparatus shall not be exposed to
dripping or splashing and no objects lled with
liquids, such as vases, shall be placed on the
product. Do not use this unit near water, such
as near a bathtub, washbowl, swimming pool,
or the like. Dry location use only.
• No naked flames sources, such as candles,
should be placed on the product.
• Do not place the unit near TVs, speakers or
other objects that generate strong magnetic
elds.
• Ventilation should not be impeded by covering
the ventilation openings.
• Do not place this appliance on an unstable
cart, stand, tripod, bracket, or table. The
appliance may fall, causing serious injury to
the user and damage to the product. Do not
place it on top of any other appliance.
• Do not use this unit near sources of heat,
including heating vents, stoves, or other
appliances that generate heat. It also should
not be placed in temperatures less than 5°C or
greater than 40°C.
• Do not leave the unit unaended when it is in
use.
• NEVER push anything into holes, slots or any
other openings in the case or the unit, as this
could result in an electric shock.
• Do not allow children to operate the unit
without adult supervision. This appliance is
not intended for use by persons (including
children) with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety. Children should be supervised
to ensure that they do not play with the
appliance.
• Unplug this appliance during lightning storms
or when unused for long periods of time.
• ONLY ADULTS may handle or charge
the baery. DO NOT drop the appliance.
Permanent damage to the appliance and
baery pack could occur or cause serious
injury.
• Protect the unit from dust, moisture, water,
and other liquids. Keep the unit clean and
never store it next to a heat source or in dirty,
humid or wet places.
• Do not pull the cord itself. Never handle the
AC/DC adaptor with wet hands, as this could
result in re or shock. Power cords should be
routed to avoid being severely bent, pinched,
or walked upon.
• Do not operate this product if it is not working
normally or has been damaged in any
way. Turn the unit o, unplug it from the
power socket and consult qualied service
personnel.

3
• Do not aempt to dismantle or repair this
unit yourself. Refer all servicing to qualied
service personnel. Servicing is required when
the appliance has been damaged in any
way, such as the AC/DC adaptor has been
dropped or damaged; the power-supply cord
or plug of adaptor being damaged; liquid has
been spilled or objects have fallen into the
appliance; the unit has been exposed to rain
or moisture; does not operate normally; the
unit has been dropped, or the cabinet has
been damaged.
• The appliance is intended for household use
only, and not for commercial, industrial or
outdoor use.
• Replacement parts – When replacement
parts are required, make sure that the service
professional who replaces the parts only
uses replacement parts that have been
approved by the manufacturer or that have
the same characteristics as the original part.
Unauthorized replacement may result in re,
electric shock or other hazards.
• Please observe the local regulations regarding
the disposal of packaging materials and old
equipment.
Notes:
1. Do not connect accessories, which are
not dened by the manufacture to the
turntable.
2. Do not increase the volume when the
appliance is just playing very quiet
sections. This could damage the
speaker if very loud passages start
suddenly after the quiet section.
3. Press the control buons and move the
tone arm gently. Pressing them too hard
can damage the appliance.
4. The openings should never be blocked
by placing the product on a bed, sofa,
rug, or other similar surface.
5. Protect the appliance against weather
influences, moistures and high
temperature. Keep the appliance away
from rain and any moisture.
6. Don’t use a record cleaner that works
as the record plays, or any cleaners
that use water or fluids. Don’t touch the
playing surface of records.
7. Try to leave the turntable running
during a record playing session. Switch
on before the start, and only switch o
after the last record has nished.
8. Don’t use any polishes on the turntable
or lid. To clean or dust, wipe gently with
a soft coon duster (slightly damp, only
if necessary).
9. When the record reaches the end of one
side, remember to lift the tone arm o
the surface of the record by using the
Lift/Lower Lever and lock it to the tone
arm rest.
Warnings:
Do not use the supplied AC/DC adaptor if
it is mechanically damaged. Do not use
the adaptor if the enclosure becomes
deformed, damaged or loosen, after a
malfunction or if it is dropped or damaged
in any manner to avoid electric shock and
injury to persons.
Your Turntable
Congratulations on the purchase of your new
turntable. Please unpack the unit carefully and
make sure the following items are included in
package. If any item is damaged or missing,
contact your dealer. Remove all packaging
materials before using.
• Turntable
• AC/DC Adaptor
• 2 x Speakers
• Spindle adaptor
Save these instructions

4
Product Overview
Top View
Rear View Control Panel
LINE OUT RL
DC 9V
SPEAKER
Turntable
Plaer Turntable
Spindle Stylus (needle)
Cartridge
Spindle adaptor
Lift/Lower Lever
Speed Selector
Auto Stop on/o switch
Tone Arm
Line out jack
AUX output
(L/R) jacks
DC IN jack
Line in jack
Function
Selector
ON/OFF-
Volume
Rotary Knob
Power indicator
Phone jack

5
Connection
Speakers connection
This appliance is designed to produce optimum
sound quality when the supplied speakers are
connected.
Connect two speakers to the AUX output (L/R)
jacks. Ensure red/white terminal matches red/
white jack when connecting speakers. To prevent
damage to circuits, never short-circuit the
speaker output terminals.
LINE IN connection
This appliance can be used as a power amplier
to playback the programs from your other audio
device.
Use the line in cable (not included) with a 3.5 mm
stereo plug on each end to connect the AUX audio
output jack of your auxiliary sound source (TV,
VCR, DVD appliance, MP3 appliance, Cassee
Deck, Mini Disc appliance, etc,) to the Line in jack
of this appliance. The sound output can then be
heard from the unit. The volume level can now
be controlled through the main unit. Operate all
other functions on the auxiliary device as usual.
Note: Always refer to the instruction
manual of the other device for complete
connection and usage details.
LINE OUT connection
You can connect this unit to an external stereo
system or amplier.
Connect the Line out jack to the audio input jack
(for labeled as “AUX IN” or “Line in”) on your
external stereo or amplier with the line in cable.
Note: The unit’s Volume Control will not
adjust the volume of external system or
amplier when Line out jack is in use.
Headphones/Earphones connection
A stereo Headphone/Earphone jack has been
provided on the unit for private listening.
To use this jack, plug in the headphones/
earphones (not included) with a stereo mini-jack
3.5mm plug to the Phone jack and adjust the
volume to a comfortable listening level.
Note:
1. When headphone or earphone is
connected to the Phone jack, the main
speakers will be automatically turned
o.
2. Be sure that your unit is set at a low
volume level before connecting the
headphone/earphone.
3. Increase the volume gradually for
comfortable listening. Listening at high
volumes for a long period could cause
hearing loss.
Power supply connection
1. Before connecting the supplied AC/DC
adaptor to the wall outlet, ensure that all
other connections have been made.
2. Unwind the cord to its full length and insert
the small plug of the AC/DC adaptor rmly
into the DC IN jack on the back of unit, and
then insert the adaptor into an available AC
100-240V ~ 50Hz wall outlet.
3. Do not handle the adaptor with wet hands.
Doing so may cause electric shock.
4. Disconnect the adaptor from the AC outlet
if the appliance is not going to be used for a
long period of time.
Caution:
• Only use the supplied adaptor. Failure
to do so may cause a re or damage the
unit.
• Do not connect the adaptor to a power
outlet other than that which is indicated
here and on the label as this may result
in the risk of re or electric shock.
• When disconnecting the power cord
from the wall outlet, do not pull on the
cord itself in order to avoid shock risks
caused by a damaged cable.
• Stop using the adaptor if it is damaged
in any way to avoid electric shock.

6
OPERATING
INSTRUCTIONS
Play Vinyl record
Before use, please ensure:
• Stylus (needle) Protector should be removed
from Stylus Cartridge before use.
• Place one vinyl record on the plaer at a time.
• Keep 15cm at least between the device and
other objects.
• The 45 RPM adaptor allows you to play 45 RPM
records. Place the 45 RPM adaptor over the
spindle and gently place your 45 RPM record
onto the 45 RPM adaptor before playing.
Follow below steps to play your vinyl record.
1. Place the unit on a flat, even surface.
2. The turntable can play 33 , 45 and 78 RPM
records. Select the correct speed (33/45/78)
with the Speed Selector depending on your
vinyl record.
3. Place the vinyl record on the turntable plaer
over the central spindle.
4. Remove Stylus (needle) Protector from Stylus
Cartridge.
5. Rotating the ON/OFF-Volume Rotary Knob
to turn on the appliance. Power indicator will
illuminate.
6. Rotate the Function Selector to “PHONO”
position to select the Vinyl record playback
mode.
7. Release the Tone Arm rest lock and ensure the
tone arm is free to move from the tone arm
rest. Use the Lift/Lower Lever to raise the tone
arm o its rest.
8. Move the Tone Arm carefully by hand to the
desired position where you want the record
to start playback. The turntable plaer starts
rotating automatically. Use the Lift/Lower
Lever to gently lower the tone arm onto the
record automatically and playback the record.
9. Adjust the ON/OFF-Volume Rotary Knob to the
desired listening level.
10. At the end of the record, turn o the
appliance. Use the Lift/Lower Lever to lift the
tone arm from the record and return it to the
arm rest by hand. Guide the tone arm and lock
it securely onto the tone arm rest.
Note: If AUTO STOP is set to ON, the
turntable plaer will stop rotating
automatically when the record is nished.
If AUTO STOP is set to OFF, the turntable
plaer won’t stop rotating when the record
is nished. You need to turn o the unit
manually.
11. Always lock the Tone Arm in place and
replace the Stylus (needle) Protector on the
Stylus Cartridge after use.
Note: Do not stop or turn the turntable
plaer manually.
Moving or jarring the turntable without
securing the tone arm clamp could result in
damage to the tone arm and stylus.
LINE in operation
The appliance can be used as a power amplier
to playback the programs from other audio device
(such as a radio, TV, MP3 or cassee deck etc.).
• Ensure there is an external audio device is
connected through the LINE IN jack.
• Rotating the ON/OFF-Volume Rotary Knob
to turn on the appliance. Power indicator will
illuminate.
• Rotate the Function Selector to “LINE IN”
position to select the LINE IN mode.
• Power on the external device and begin
playing. Adjust the ON/OFF-Volume Rotary
Knob to the desired listening level.

7
Bluetooth in operation
1. Rotating the ON/OFF-Volume Rotary Knob
to turn on the appliance. Power indicator will
illuminate.
2. Rotate the Function Selector to “BT” position
to select the Bluetooth mode.
3. The Power indicator will illuminate blue and
flash to indicate that the speaker is under
Bluetooth pairing mode.
4. Turn on your Bluetooth audio device to go into
pairing mode to search for Bluetooth device
automatically. Navigate to your Bluetooth
device’s setup screen, nd “MAT10A-SP” and
follow up the on-screen instruction to setup
the connection (see the user manual of the
Bluetooth device on how to enable Bluetooth).
5. When the speaker is connected to your
Bluetooth device successfully, the blue
indicator will stop flashing and turn solid.
6. Play music from your Bluetooth device after it
is connected successfully. Adjust the ON/OFF-
Volume Rotary Knob to the desired listening
level.
Note: If your Bluetooth device is not able
to pair to the appliance, disconnect the
Bluetooth to break the previous Bluetooth
connections and try again.
The maximum operational range between the
appliance and Bluetooth device is 10 meters.
The distance may be dierent in dierent
environment or with dierent Bluetooth device.
The music streaming may be interrupted by
obstacles between the appliance and Bluetooth
device, such as wall, metallic casing that covers
the device, or other devices nearby that operate
in the same frequency.
Care and Cleaning
1. Always turn the appliance o and remove
the AC/DC adaptor from the outlet before
cleaning.
2. Never spray or pour liquids directly onto the
appliance, and clean with a dry towel only.
3. Do not clean the unit with strong chemical
agents or abrasive cleaners.
4. Clean the cabinet and buons with a slightly
dampened soft cloth only.
5. Do not use a coarse cloth, abrasive materials,
or chemical cleaners such as alcohol,
benzene, etc.
6. Do not allow residue or liquids to enter into
any part of the appliance as this may cause
risk of electrocution.
7. Never allow any water or other liquids to get
inside the unit while cleaning.
Specications
General
Power supply (AC/DC adaptor):
Input: 100-240V~50/60Hz
Output: DC 9V 1.3A
Turntable
Motor: DC servo motor
Drive system: Belt drive
Speed: 33 rpm, 45 rpm and 78 rpm
Cartridge type: Ceramic stereo cartridge
Speaker
Impedance: 4 ohm
Output power: 10W
As the result of continual improvements,
the design and specications of the
product within may dier slightly to the
unit illustrated on the packing.

8
Troubleshooting
Problem Possible cause Solution
The unit does not operate The AC/DC adaptor is not
connected to a power outlet.
The unit is not turned on.
No correct playing mode
selected.
Connect the AC/DC adaptor to
the AC outlet with power.
Rotate ON/OFF-Volume Rotary
Knob to the ON position.
Turn the Function Selector to
select correct mode.
No sound The volume is not turned up.
The Stylus Protector has not
removed.
Adjust the ON/OFF-Volume
Rotary Knob to the desired
listening level.
Remove the Stylus Protector
from Stylus cartridge before
playing Vinyl record.

9
Warranty Conditions For Purchase In Australia
Any claim under this warranty must be made within 12 months of the date of purchase of the product.
To make a claim under the warranty in Australia, take the product (with proof of purchase) to any
Australia Post outlet.
GSM Retail Group bears reasonable, direct, expenses of claiming under the warranty in Australia. You
may submit details and proof to Australia Post outlet for consideration or contact our Consumer Hotline
phone number below.
This warranty is provided in addition to other rights and remedies you may have under law: our goods
come with guarantees which cannot be excluded under the Australian Consumer Law (if purchased in
Australia). You are entitled to replacement or refund for a major failure and to compensation for other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The warranty excludes damage resulting from product misuse or product neglect. The warranty covers
domestic use only and does not apply to commercial applications.
This warranty is given by GSM Retail Group
ABN: 53007682475
For Warranty and technical queries 1300 941 901
Warranty Exclusions
Damage to the appliance or any part through accident, misuse or negligence.

10
Notes