Mitel 5613 User manual

Cover Page Graphic
Place the graphic directly on the page, do not care
about putting it in the text flow. Select Graphics >
Properties and make the following settings:
• Width: 15,4 cm (Important!)
• Height: 11,2 cm (May be smaller)
• Top: 5,3 cm (Important!)
• Left: -0,3 cm (Important!)
This text should then be hidden.
MITEL 5613 CORDLESS
PHONE
QUICK REFERENCE GUIDE
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 1 Thursday, March 1, 2018 2:52 PM

LZT 103 102 R2E 2018-03-06
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 2 Tuesday, March 6, 2018 6:46 PM

ENGLISH ........................................................ 7
DANSK .......................................................... 17
DEUTSCH ..................................................... 27
ESPAÑOL ..................................................... 37
FRANÇAIS .................................................... 47
ITALIANO ...................................................... 57
NEDERLANDS .............................................. 67
NORSK ......................................................... 77
PORTUGUÊS DO BRASIL ........................... 87
РУССКИЙ .......................................................97
SUOMI ........................................................ 107
SVENSKA ................................................... 117
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 3 Wednesday, February 21, 2018 5:39 PM

MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 4 Thursday, March 1, 2018 2:52 PM

5
FCC Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules.
These limits are designed to provide reasonable pro-
tection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV tech-
nician for help.
--------------------------------------------------------------
Privacy of communications may not be ensured
when using this phone.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
device must not be collocated or operating in conjunc-
tion with any other antenna or transmitter.
• This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA. On
the rear side, underneath the battery of this equip-
ment is a label that contains, among other informa-
tion, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number
must be provided to the telephone company.
• REN is N/A as this product is intended to be con-
nected behind a FCC Part 68 compliant PBX system.
It is not intended for direct connection to telephone
network.
• If this equipment cause harm to the telephone net-
work, the telephone company will notify you in
advance that temporary discontinuance of service
may be required. But if advance notice isn't practical,
the telephone company will notify the customer as
soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it
is necessary.
• The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
• If trouble is experienced with this equipment, for
repair or warranty information, please contact your
Mitel business partner http://www.mitel.com.
This equipment is not intended to be repaired by the
customer (user). If the equipment is causing harm to
the telephone network, the telephone company may
request that you disconnect the equipment until the
problem is resolved.
• Connection to party line service is subject to state
tariffs. Contact the state public utility commission,
public service commission or corporation commis-
sion for information.
• If your home has specially wired alarm equipment
connected to the telephone line, ensure the installa-
tion of this equipment that it does not disable your
alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone
company or qualified installer.
Electrical Safety Advisory
Electrical surges, typically lightning transients, are
very destructive to customer terminal equipment con-
nected to AC power sources. Customer is thus rec-
ommended to use a surge arrestor for the equipment
that requires AC power.
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 5 Thursday, March 1, 2018 2:52 PM

MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 6 Thursday, March 1, 2018 2:52 PM

7
English
Important user information
NOTICE
The information contained in this document is
believed to be accurate in all respects but is not
warranted by Mitel Networks™ Corporation
(MITEL®). Mitel makes no warranty of any kind with
regards to this material, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. The information is subject to
change without notice and should not be construed in
any way as a commitment by Mitel or any of its affili-
ates or subsidiaries. Mitel and its affiliates and
subsidiaries assume no responsibility for any errors
or omissions in this document. Revisions of this
document or new editions of it may be issued to
incorporate such changes.
No part of this document can be reproduced or trans-
mitted in any form or by any means - electronic or
mechanical - for any purpose without written permis-
sion from Mitel Networks Corporation.
TRADEMARKS
The trademarks, service marks, logos and graphics
(collectively "Trademarks") appearing on Mitel's
Internet sites or in its publications are registered and
unregistered trademarks of Mitel Networks Corpora-
tion (MNC) or its subsidiaries (collectively "Mitel") or
others. Use of the Trademarks is prohibited without
the express consent from Mitel. Please contact our
legal department at [e-mail] for additional
information. For a list of the worldwide Mitel Networks
Corporation registered trademarks, please refer to
the website: http://www.mitel.com/trademarks.
© Copyright 2018, Mitel Networks Corporation
All rights reserved
Safety Instructions
Note: When using your telephone or connected
equipment, the following basic safety precautions
should always be followed to reduce risk of fire,
electrical shock and other personal injury.
Recommendations
• Always keep and handle your products with care
and keep them in a clean and dust-free place.
Proper use and care will prolong the products
life. Use a soft absorbent tissue or cloth to
remove dust, dirt or moisture.
• Always ensure that the phone, battery and
charger are used and operated in the
environment for which they are designed.
• Operate the phone in temperatures between
0°C to +40°C (32°F to 104°F).
• Do not expose your products to
liquid, moisture, humidity, solvents,
strong sunlight, harsh environments
or extreme temperatures, never
above +60°C (+140°F), unless the
product has been specifically
designed and officially approved for such
environments.
• Exposure to heat may cause
batteries to leak, overheat or
explode, resulting in fire, burns or
other injuries.
• Do not put the product in the micro-
wave oven: This may cause damage to either
the oven or the product.
• Do not attempt to disassemble or
alter any part of the phone, the
charger(s) or the battery-pack.
Disassembly or alteration may result
in electrical shock or irreversible
damage to the equipment. Only a
qualified service personnel or an authorized Mitel
partner should conduct internal inspections,
alterations and repairs.
• Do not expose your product to open flames or lit
tobacco products.
• Do not drop, throw or bend your products.
This may cause malfunction or electric shock.
• Do not paint your product.
• Do not use your product in an area where a
potentially explosive atmosphere exists, unless
the product has been specifically designed and
officially approved for such environments.
• To avoid hearing impairment, accept the call
before holding your product (or portable
handsfree device) to your ear.
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 7 Thursday, March 1, 2018 2:52 PM

8
English
Disposal of the product
• Your product should not be placed in
municipal waste. Please check local
regulations for disposal of electronic
products.
Power supply
• Connect the AC power adapter of the charging
unit only to the designated power sources as
marked on the charger.
• Make sure the AC power supply is positioned so
that it will not be subjected to damage or stress.
• To reduce risk of electrical shock, unplug the
chargers from any power source before
attempting to clean or move it.
• The AC power adapters must not be used
outdoors or in damp areas.
• Never modify the cord or plug. If the plug will not
fit into the outlet, have a proper outlet installed
by a qualified electrician.
• Limit the distance between the mains socket and
the cordless phone when charging for easy
accessibility.
• As an energy saving measure, disconnect the
charger from the main socket after charging.
• When unplugging the mains adapter from the
power outlet, make sure that your hands are dry
and ensure that you hold the solid portion of the
mains adapter.
• Do not pull on cables.
• See the complete User Guide for available
power adapters.
Charging and batteries
• Please read carefully the following
important precautions before the
first time use of the batteries. Make
sure to understand and observe all
cautionary instructions stated, so as
to avoid any possible safety hazards
that are caused by any misuse, misapplication
or damage to batteries.
• Only use batteries, mains adapters or desk and
rack chargers which have been specifically
designed for use with your product.
• Use of power sources not explicitly recommend-
ed may lead to overheating, reduced battery
performance, distortion of the equipment and
fire or other damages.
• The phone is equipped with Lithium Li-polymer/
Li-Ion battery. In a complex infrastructure, the
talk- and standby time may differ, due to the con-
sequence of the increase in signaling.
• The battery must always be completely charged
(minimal 4 hours) before first time use.
• The battery in your product is designed to
withstand many charge cycles.
• Use only the recommended charging
equipment.
• Improper charging can cause heat damage or
even high pressure rupture.
• Observe proper charging polarity.
• Do not solder lead wires directly onto the battery.
• Do not allow water to come into contact with the
battery.
• The battery is replaceable, however it is not the
intention to do this frequently.
• Only charge the battery when placed in the
phone.
• Use only the specified battery-packs for your
product.
• Never heat or dispose of the battery into a fire,
which, or else, may cause leakage, burst or fire.
• Remove the carrying case from the product
while in charger.
• Do not cover the product while being charged.
Do not charge the phone in a closed cabinet or
drawer. The charging of the battery is a chemical
process and causes the battery to become warm
during charging. Make sure the environment in
which the phone is charged, is well vented.
• The cordless phone can be charged either when
switched on or off.
• Do not connect the battery's positive and
negative leads altogether in any circumstances.
• Do not strike or drop the battery. It may cause
damage to the battery.
• Do not charge the battery below
+5°C (+41°F). Be sure to charge the
battery between +5°C and +40°C
(+41°F and 104°F). Charging
beyond these conditions may impair
the battery performance and shorten
the life cycle.
• Do not use battery packs from different types,
brands or of different capacities.
• The battery is to be stored in a dry cool place,
with the ambient temperature of approx. +25°C
(+77°F) for best performance.
• The battery continues to discharge a minimal
portion of its power, even if the product is
switched off or the battery is removed.
• Dispose the battery in accordance with all local
regulations, applicable in your country.
Warnings
Smoke or fumes
• Stop operating the products and
turn off immediately in case of
smoke or fumes. Unplug the mains
adapter and remove the batteries from the
phone immediately. Continued operation may
result in fire or electrical shock.
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 8 Thursday, March 1, 2018 2:52 PM

9
English
LCD
• If the liquid crystal display breaks, avoid injury by
not allowing the liquid crystal to come into
contact with eyes, skin or mouth. Prevent the
liquid crystal from leaking out of the broken
glass.
Preventing malfunction
• Never place the equipment in close proximity
of electric motors, welding equipment or other
devices generating strong (electro) magnetic
fields. Exposure to strong (electro) magnetic
fields may cause malfunction and corrupt the
communication.
• Moving the equipment rapidly between warm
and cold temperatures may cause condensation
(water droplets) to form on its internal and
external surfaces. Water droplets may cause
malfunction of the equipment and corrupt or end
communication or damage the equipment. When
condensation is noticed, stop using the
equipment. Switch off the phone, remove the
battery and unplug the mains adapter from the
power outlet. Wait until the moisture evaporates
from the equipment before putting it in operation
again.
• Avoid accidental drop of the phone. Use the clip,
security clip or carrying case specified for
carrying purposes of the phone.
• Avoid squeezing the phone between furniture
and your body when carrying the phone in your
pocket or attached to clothing.
Notice to European customers:
• The CE marking affixed to Mitel products
indicates conformance to the RED 2014/53/EU
(Radio and Telecommunications Terminal
Equipment Directive).
• For a copy of the original signed Declaration (in
full conformance with EN45014), please contact
your Mitel office or Sales partner.
• For more information on:
http://www.mitel.com
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 9 Thursday, March 1, 2018 2:52 PM

10
English
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 10 Thursday, March 1, 2018 2:52 PM

11
English
MITEL 5613 CORDLESS PHONE
QUICK REFERENCE GUIDE
Main Display Menu
Note: Information displayed can vary depending on version
and configuration of the exchange, or whether the phone is
used in a DECT or an IP DECT system. Consult your system
administrator to find out which type of system your phone is
used in.
1
2
3
This Quick Reference Guide includes short
descriptions on how to use the basic features. More
features and technical requirements are available in
the User Guide.
The complete User Guide is available on
www.mitel.com
Read the safety instructions before use!
1 Earpiece speaker
2 Soft key
3 Off-hook key
4 Voice mail access
5 Key lock and Upper/Lower case
6Space
7 Microphone
8 Sound off key
9 Tactile indicators
10 On-hook and On/Off key
11 Four-way navigation key
12 Display
13 Headset connector
When you press the soft key Menu, the Contacts tab is marked
by default.
1 Settings
2 Contacts
3 Calls
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 11 Thursday, March 1, 2018 2:52 PM

MITEL 5613 CORDLESS PHONE QUICK REFERENCE GUIDE
12
English
Switch On and Off
Switch on: Press and hold (Until
display lights up)
Yes (confirm)
Switch off: Press and hold
Yes (confirm)
Free seating
Log on: *11*Authorization code *
Own extension number
#
Note: Free seating is not supported by IP
DECT.
Log off: #11#
Answer Calls
Answer: Press
Handsfree: Press
Headset: Press the answering button on
the headset.
Call pick-up: Call ringing extension 8
France and New Zealand: Press 4;
Sweden: Press 6
Group call pick-up: * 8 #
Finland and Sweden: Press *0#;
U.S.A. and Canada: Press *59#
End call: Press
Reject call: Press
Make Calls
Dial: Dial extension number or
external line and number
Handsfree: Dial number
Common speed
dialing number:
Dial common speed dialing
number
Dial by contact: Press Menu - Contacts - Call
contact, select contact
Note: Contacts marked with cannot be
modified.
Search and dial a
contact:
Press Menu - Contacts -
Central phonebook- Search
by name (or Search by
number), enter name (or
number) and press Search.
Select contact
Dial by call list: Press select number
Redial last
external number: ***
Finland and Sweden: Press **0
Silent Ringing and Mute
Mute ringing
telephone:
Press to suppress the
ringing. (Press to answer.)
Switch ring
signal off: Press and hold
Mute microphone
during call: Press and hold during
call
Volume
Adjust speaker
Volume:
Press the navigation key
(up and down) to adjust
speaker volume during a call.
Adjust ringing
volume:
Press Menu - Settings -
Sound & Alerts - Volume and
adjust with navigation keys.
Make Calls
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 12 Thursday, March 1, 2018 2:52 PM

13
MITEL 5613 CORDLESS PHONE QUICK REFERENCE GUIDE
English
Callback
(The busy number calls back when free).
Order: Press More - Callback
If the function cannot be activated on
your phone by pressing More, press
6instead.
France, New Zealand and Sweden:
Press 5
Cancel all
callbacks: #37#
U.S.A. and Canada: Press #6#
Cancel single
callback: #37*extension number #
U.S.A. and Canada: Press #6*
Call Waiting
(A call waiting signal is sent to the busy number.)
Order: Press More - Call waiting
(Close menu but keep phone off hook.)
If the function cannot be activated on
your phone by pressing More, press
5instead.
France and New Zealand: Press 6;
Sweden: Press 4
(Call Waiting signal is indicated during an ongoing
call.)
Answer: Press soft key R (ongoing call
is put on hold)
Or
Press
Intrusion
(Intrude a busy extension to ask the party to hang
up.)
Activate: Press 4
France, New Zealand and Sweden:
Press 8
Bypass
(Bypass Follow-me on a specific extension.)
Activate: *60*desired number #
U.S.A. and Canada: Press *1*
Park a Call
Inquiry
(The first call is parked automaically.)
Ongoing
conversation:
Press More - New call,
dial number
If the function cannot be activated on
your phone by pressing More, press soft
key Rinstead and dial number.
Refer back: Press More - Switch
If the function cannot be activated on
your phone by pressing More, press
2instead.
Sweden: Press R
On hold
Put on hold: Press R
Resume a call: (within 30 sec)
Resume a call on
another extension:
Call the extension where call
was put on hold. Press 8
France and New Zealand: Press 4;
Sweden: Press 6
Conference
Ongoing
conversation:
Press More - New call,
dial number
At answer, press More -
Conference
Repeat to add more.
If the function cannot be activated on
your phone by pressing More, do the
following: Press soft key R, dial number,
and press 3
at answer.
U.S.A. and Canada: Press 4
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 13 Thursday, March 1, 2018 2:52 PM

MITEL 5613 CORDLESS PHONE QUICK REFERENCE GUIDE
14
English
Transfer
Ongoing
conversation:
Press More - New call,
dial number
Before or after answer, press
More - Transfer
If the function cannot be activated on
your phone by pressing More, press R,
dial number, and press before or
after answer.
Blind transfer: Press More - Transf. to new
dial number
Call Forwarding
Internal Follow-me
Order from your
extension: *21*New extension
number #
U.K.: Press *2*
Cancel: # 21#
U.K.: Press #2#
External Follow-me
Order: *22#External line code
and number #
U.S.A. and Canada: Press *23#
Cancel: #22#
U.S.A. and Canada: Press #23#
Personal Number
Order or
change to another
profile from
own extension:
*10*(1-5)#
Search profile digits (1-5), are
programmed by system administrator.
Cancel: #10#
Voice Mail (Optional)
Receive a voice mail
message received:
Enter the mailbox: Press and hold 1
Note: Press and hold 1requires that a
voice mail number has been configured
to the Voice Mail button. Please contact
your system administrator.
Contacts
Add contact: Press Menu - Contacts - Add
contact - From call list, select
a contact and press Add.
Or
Press Menu - Contacts - Add
contact - New - Add. Enter
contact details and press OK
after each detail. Press Save.
Edit contact: Press Menu - Contacts - Edit
contact. Select contact and
press Edit, edit the contact and
press OK, then Save.
Delete contact: Press Menu - Contacts -
Delete contact. Select contact
and press Delete, then Yes to
confirm.
Account Code
Activate: *61*account code #
external number
Norway and Finland: Press *71*
Absence Information
Order: *23*absence code (0-9)
Enter time or date (if requested)
#
U.S.A. and Canada: Press *24*
Cancel: #23#
U.S.A. and Canada: Press #24#
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 14 Thursday, March 1, 2018 2:52 PM

15
MITEL 5613 CORDLESS PHONE QUICK REFERENCE GUIDE
English
General Deactivation
Cancel all
features: # 001 #
U.S.A. and Canada: Press *0#
Display Language
Change display
language:
Press Menu - Settings -
Language and select one of
the languages from the list.
Time and Date
Set time format: Press Menu - Settings - Time
& Date - Time format and
select the desired option.
Set date format: Press Menu - Settings - Time
& Date - Date format and
select the desired option.
Charging the Battery
To charge the battery, place the phone in a desk
charger or a rack charger.
Replacing the Battery
To replace the battery, do the following:
1. Switch off the phone, open the battery
compartment, and remove the battery.
2. Disconnect the battery cable, and replace with a
new battery.
Accessories
The following accessories are available:
Also available:
• Security string
• Rack charger
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 15 Thursday, March 1, 2018 2:52 PM

MITEL 5613 CORDLESS PHONE QUICK REFERENCE GUIDE
16
English
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 16 Thursday, March 1, 2018 2:52 PM

17
Dansk
Vigtige brugeroplysninger
BEMÆRK
Oplysningerne i dette dokument anses for at være
nøjagtige i alle henseender, men Mitel Networks™
Corporation (MITEL®) indestår ikke for oplysnin-
gerne. Mitel giver ingen garanti af nogen art vedrø-
rende dette materiale, herunder, men ikke
begrænset til, underforståede garantier vedrørende
salgbarhed og egnethed til et bestemt formål. Oplys-
ningerne kan ændres uden varsel, og de bør ikke på
nogen måde kunne fortolkes som en forpligtelse for
Mitel eller nogen af Mitels affilierede selskaber eller
datterselskaber. Mitel og Mitels affilierede selskaber
og datterselskaber påtager sig intet ansvar for even-
tuelle fejl eller udeladelser i dette dokument. Revisi-
oner af dette dokument eller nye versioner af
dokumentet vil muligvis blive udstedt for at inkorpo-
rere sådanne ændringer.
Ingen del af dette dokument må reproduceres eller
overføres i nogen form eller ved hjælp af nogen
metoder - hverken elektroniske eller mekaniske -
med noget formål for øje uden skriftlig tilladelse fra
Mitel Networks Corporation.
Varemærker
De varemærker, servicemærker,logoer og grafik
(samlet "Varemærker"), der vises på MITEL webste-
der eller i publikationer, er registrerede og uregistre-
rede varemærker tilhørende Mitel Networks
Corporation (MNC) og dets datterselskaber (samlet
"Mitel") eller andre. Det er forbudt at bruge Vare-
mærkerne uden udtrykkelig godkendelse af Mitel.
Venligst kontakt vores juridiske afdeling på
[email protected] for yderligere information. En glo-
bal liste over registrerede varemærker tilhørende
Mitel Networks Corporation findes på hjemmesiden
http://www.mitel.com/trademarks.
© Copyright 2018, Mitel Networks Corporation
Alle rettigheder forbeholdes
Sikkerhedsinstruktioner
Bemærk: Ved brug af telefonen eller tilsluttet
udstyr skal de grundlæggende sikkerheds-
forskrifter altid overholdes for at nedsætte risikoen
for brand, elektrisk stød og anden personskade.
Anbefalinger
• Sørg altid for at opbevare og håndtere dine
produkter omhyggeligt og opbevare dem et rent
og støvfrit sted. Korrekt anvendelse af produktet
forlænger dets levetid. Anvend et blødt absorbe-
rende materiale til at fjerne støv, snavs eller fugt.
• Sørg for, at telefonen, batteriet og opladeren
anvendes og betjenes i de omgivelser, de er
beregnet til.
• Anvend telefonen i temperaturområder mellem
0 °C til + 40 °C.
• Undlad at udsætte produkterne for
væske, fugt, fugtighed, opløsnings-
midler, strækt sollys, barske miljøer
eller ekstreme temperaturer, aldrig
over + 60 °C, med mindre produktet
er specifikt designet og officielt
godkendt til brug i sådanne miljøer.
• Varmeudsættelse kan få batterierne
til at lække, overopvarme eller
eksplodere, hvilket kan resultere i
brand, forbræn-
dinger eller andre skader.
• Produktet må ikke anbringes i mi-
krobølgeovn: Dette kan forårsage skade på
enten ovn eller produkt.
• Forsøg ikke at adskille eller ændre
dele af telefonen, oplader(e) eller
batteripakken. Adskillelse eller
ændring kan resultere i elektrisk stød
eller uoprettelig skade på udstyret.
Interne eftersyn, ændringer eller
reparationer må kun udføres af kvalificerede
serviceteknikere eller en autoriseret Mitel-
partner.
• Produktet må ikke udsættes for åben ild eller
tændte tobaksprodukter.
• Produkterne må ikke tabes, kastes eller bøjes.
Dette kan forårsage fejl på produktet eller
elektrisk stød.
• Produktet må ikke males.
• Undlad at bruge produktet i områder med en
potentielt eksplosiv atmosfære, med mindre
produktet er specifikt designet og officielt
godkendt til brug i sådanne miljøer.
• Besvar et opkald, før produktet (eller den
bærbar håndfri enhed) holdes op mod øret for at
undgå høreskade.
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 17 Thursday, March 1, 2018 2:52 PM

18
Dansk
Bortskaffelse af produktet
• Produktet må ikke efterlades på
kommunale affaldspladser. Vi beder
dig undersøge lokale regler for
bortskaffelse af elektroniske
produkter.
Strømforsyning
• Slut kun opladerens AC-strømadapter til den
udpegede strømkilde som markeret på
opladeren.
• Sørg for, at AC-strømforsyningen er placeret, så
den ikke beskadiges eller udsættes for
belastning.
• For at nedsætte risikoen for overbelastning eller
elektrisk stød skal opladere afbrydes fra alle
strømkilder, før de rengøres eller flyttes.
• AC-strømadaptere må ikke bruges udenfor eller
i fugtige områder.
• Ledningen eller stikket må aldrig modificeres.
Hvis stikket ikke passer i stikkontakten, skal der
instal-
leres en passende stikudgang af en kvalificeret
elektriker.
• Afstanden mellem stikkontakten og den trådløse
telefonen skal begrænses for at sikre bedre
tilgængelighed ved opladning.
• Afbryd opladeren fra strømnettet efter endt
opladning for at spare strøm.
• Når netadapteren afbrydes fra stikket, skal du
sikre dig, at dine hænder er tørre, og at du tager
fat i den faste del af strømadapteren.
• Træk ikke i kablerne.
• Der henvises til den komplette brugervejledning
i forbindelse med oplysninger om tilgængelige
strømadaptere.
Opladning og batterier
• Læs følgende vigtige forskrifter om-
hyggeligt, før batterierne tages i
brug første gang. Sørg for, at du
forstår og overholder alle angivne
sikkerhedsinstruktioner for at undgå
eventuelle sikkerhedsrisici, som
skyldes misbrug, forkert anvendelse eller
beskadigelse af batterier.
• Anvend kun batterier, netadaptere eller
opladere, som er specifikt beregnet til brug med
produktet.
• Anvendelse af strømkilder, som ikke udtrykkeligt
anbefales, kan resultere i overophedning,
nedsat batteriydeevne, forvrængning af udstyr
samt brand eller andre skader.
• Telefonen er udstyret med Lithium Li-polymer/
Li-Ion-batteri. I komplekse infrastrukturer kan
tale- og standbytider variere som en konsekvens
af den forøgede signallering.
• Batteriet skal altid være helt opladet (mindst
4 timer), før det tages i brug første gang.
• Batteriet i produktet er beregnet til at kunne
oplades mange gange.
• Anvend kun anbefalet opladningsudstyr.
• Forkert opladning kan forårsage varmeskade
eller endda trykbrud.
• Overhold korrekt opladningspolaritet.
• Undlad at lodde strømledninger direkte på
batteriet.
• Lad ikke vand komme i kontakt med batteriet.
• Batteriet kan udskiftes, men dette skal dog ikke
gøres særligt ofte.
• Oplad kun batteriet, når det er placeret i
telefonen.
• Anvend kun de batteripakker, der er specificeret
for produktet.
• Opvarm aldrig batteriet eller bortskaf det med
brug af ild eller på anden måde, som kan
forårsage lækage, brud eller brand.
• Fjern etuiet fra produktet, når det oplades.
• Tildæk ikke produktet, mens det opvarmes.
Oplad ikke produktet i et lukket skab eller en
skuffe. Opladningen af batteriet er en kemisk
proces, som opvarmer bateriet under opladning.
Sørg for, at de omgivelser, hvor telefonen
oplades, er godt ventilerede.
• Den trådløse telefon kan oplades i både slukket
og tændt tilstand.
• Sæt ikke under nogen omstændigheder
batteriets positive og negative ledninger
sammen.
• Slå ikke på batteriet eller tab det. Dette kan
forårsage skade på batteriet.
• Oplad ikke batteriet under + 5 °C.
Sørg for at oplade batteriet mellem
+ 5 °C og + 40 °C. Opladning under
andre forhold kan forringe batteriets
ydeevne og forkorte levetiden.
• Anvend ikke batteripakker af andre typer,
mærker eller med en anden kapacitet.
• Batteriet skal opbevares på et tørt og køligt sted
med en omgivelsestemperatur på ca. + 25 °C
for at sikre optimal ydeevne.
• Batteriet aflades fortsat en anelse, selvom
produktet er slukket eller batteriet er fjernet.
• Bortskaf batteriet i overensstemmelse med alle
lokale bestemmer, der gælder i dit pågældende
land.
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 18 Thursday, March 1, 2018 2:52 PM

19
Dansk
Advarsler
Røg eller dampe
• Stop betjeningen af og sluk
øjeblikkeligt produktet i tilfælde af røg
eller dampe. Afbryd forbindelse til
netadapter og fjern med det samme batterierne
fra telefonen. Fortsat betjening kan resultere i
brand eller elektrisk stød.
LCD
• Hvis displayet af flydende krystal går i stykker,
må det flydende krystalmateriale ikke komme i
kontakt med øjne, hud eller mund for at undgå
skade. Undgå, at flydende krystal lækker fra det
knuste glas.
Forhindring af fejl
• Anbring aldrig udtyret i nærheden af elmotorer,
svejseudstyr eller anre enheder, der genererer
og udsender strærke (elektro)-magnetiske
felter. Udsættelse for stærke (elektro)-
magnetiske felter kan forårsage fejl og afbryde
kommunikationen.
• Hvis udstyret flyttes hurtigt mellem varme og
kolde temperaturer, kan der dannes
kondensering (små vanddråber) på interne og
eksterne flader. Små vanddråber kan forårsage
fejl på udstyret og ødelægge kommunikationen
eller beskadige udstyret. Hvis der bemærkes
kondensering, skal brug af udstyret indstilles.
Sluk for telefonen, fjern batteriet og afbryd
forbindelsen til netadapter fra kontakten. Ventil,
indtil fugten fordamper fra udstyret, før det tages
i brug igen.
• Undgå at tabe telefonen. Brug klipsen eller
bæreetuiet til at bære telefonen.
• Undgå at telefonen kommer i klemme mellem
møbler og dig selv, når du opbevarer telefonen
i lommen eller har sat den på dit tøj.
Meddelelse til europæiske kunder:
• Den CE-mærkning, der er knyttet til
Mitelprodukter, angiver overensstemmelse med
RED 2014/53 / EU. (Direktiv om radio- og
teleterminaludstyr).
• Hvis du ønsker at få en kopi af den originalt
signerede erklæring (i fuld overensstemmelse
med EN45014), bedes du kontakte dit lokale
Mitel-kontor eller din lokale forhandler.
• Du kan få yderligere oplysninger på:
http://www.mitel.com
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 19 Thursday, March 1, 2018 2:52 PM

20
Dansk
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 20 Thursday, March 1, 2018 2:52 PM