Mitsubishi Electric DX-TL4509E series User manual

DX-TL5000E
DX-TL4516E
DX-TL4509E
.
QUICK START GUIDE

1
Quick SETUP GUIDE FOR DX-TL5000E
Contents
Introduction.................................................................................................................................................2
DX-TL5000E Front View: ....................................................................................................................2
DX-TL5000E Back View:.....................................................................................................................2
Jog/Shuttle Control:.............................................................................................................................2
Before Powering the Unit ON:....................................................................................................................3
Various Recording Functions .....................................................................................................................4
1st Time Power Up & SETUP Wizard: .................................................................................................6
SETUP WIZARD Screens...................................................................................................................6
Start Recording.........................................................................................................................................11
Menu structure ..................................................................................................................................11
MOTION ALARM RECORDING...............................................................................................................12
Changing Motion Area.......................................................................................................................13
Operation Example Motion Detection.......................................................................................................15
Programming Motion Detection................................................................................................................15
Testing Programming............................................................................................................................20
Operation Example Timer Recording .......................................................................................................22
Pattern B Recording..........................................................................................................................24
Motion B Settings..............................................................................................................................26
TIMER Programming.........................................................................................................................27
Connecting 2 DX-TL5000 together (CASCADE)......................................................................................31
Programming Cascade Contention.......................................................................................................31
Network Configuration LAN B...................................................................................................................33
Default IP settings.............................................................................................................................33
Remote connections and Network Bandwidth limits..........................................................................35
PTZ CAMERAS........................................................................................................................................36
EXTERNAL Storage Features..................................................................................................................38
Password Settings....................................................................................................................................39
Disk management password.................................................................................................................41
Multiplex Setting Overview .......................................................................................................................43
Multiplexer Setting ................................................................................................................................44
Alarm Display Setting........................................................................................................................44
Covert Camera Setting......................................................................................................................45
Menu Data (Saving Settings)....................................................................................................................46
Save Settings....................................................................................................................................46
Load Settings ....................................................................................................................................47
Firmware Upgrade....................................................................................................................................48
DX-TL5000E Optional Parts.....................................................................................................................49

Introduction
The following procedure will allow you to quickly configure the DX-TL5000E. Please read this
document before you turn the unit on or make any changes. Additional information is found in
the Installer’s Manual
DX-TL5000E Front View:
1. Power Indicator 2. Remote Jack 3. Access
Indicator
4. Com Indicator 5. Alarm Indicator 6. Timer
Indicator
7. Lock Indicator 8. Motion Det. Ind. 9. Pre-Alarm
Ind.
10. Copy Ind. 11. Copy 2 Ind. 12. REC/STOP
13. SPLIT Screen 14. Sequence Button 15. PTZ Button
16. Output A/B Button 17. Disk Loading Slot 18. LCD Display
19. Shuttle Ring 20. Jog Dial Ring 21. Camera 1-16
22. Power Button 23. Analogue Out 24. USB Port
25. Help Button 26. SETUP Button 27. SEARCH
28. TIMER 29. LOCK Button 30. TRIPLEX
31. BOOKMARK 32. DIGITAL ZOOM 33. OPERATIONS
DX-TL5000E Back View:
1. Main Power Switch 2. AC Power Socket 3.Camera Inputs
4. Video Output 5. Video CASCADE In/Out Connectors
6. USB Ports 7. LAN Port A (NAS device), Port B for
PC
8. Audio Inputs 9. Keyhole for antitheft Lock
10. Option Slot 11.GRN Terminals 12.RS-232 Port
13. Alarm In/Out Term.14. Reset Button 15.I/O Terminals
16. RS-485 In/Out 17.RS-422/RS23
Jog/Shuttle Control:
Playback Speed Control Only – Turning the Shuttle (outside ring) Clock Wise
or Counter Clock Wise (CW/CCW) will change the playback speed. When in
Pause mode, the Shuttle is also used to set the desired playback speed. F
Pause turn the Shuttle to the desired Playback speed and press Pause to hold
the speed. Play to exit
rom
2

Before Powering the Unit ON:
Before you turn on the DVR and begin SETUP, ensure that all cameras and peripheral devices
are connected and turned on. This will ensure that all connected cameras and hard disk space
is available and recognized in the setup calculations.
Please Note:
This Quick Setup Guide has been written around the DX-TL5000E DVR.
It can be used for the DX-TL4516 and DX-TL4509, but some of the listed features are
not supported.
The DX-TL4516/09 does not support the following functions;
Cascade connections
Optional SCSI interface, XGA output and Audio card.
NAS support.
The Recording Rate for the system is 100pps.
3

Various Recording Functions
4

5

1st Time Power Up & SETUP Wizard:
When the DVR is Turned On for the first time a SETUP WIZARD is made available to help you quickly setup
required areas like current time, hard disk configuration, recording requirements and checking for connected
cameras. Once done, you can start recording. All settings can be modified after you exit the wizard enabling
you to fine tune the DVR. When the SETUP WIZARD is displayed, select “GO” if you want to go through the
process, if you do not want to use it select “QUIT”. Also, if you choose to use the WIZARD, you must
complete the process before you can exit its settings.
Following are the steps that the WIZARD takes you though
SETUP WIZARD Screens
Start Screen. Language Selection.
(900 000 000) Select D on front panel or use a USB (901 000 000) Select Language
Mouse and click on Go > Press D Next
6

1 Date and Time. 2 Daylight Saving.
(902 000 000) Set Time and Date (902 000 000) Press A Auto
Use Cam buttons 14 & 16 to navigate and camera Press C Set
Numbers to change the values.
3 Daylight Saving Date and Times. 4 Hard Disk Drives Connection.
(902 C00 000)Confirm Details are correct for your region. (903 000 000) Normally Internal if you are
Press E Return using just the internal HDD.
Press 2 Settings
5 Hard Disk Drives Connection. 6 Internal HDD settings.
(903 200 000) Press 1 Settings (903 210 000) Normally settings Main: **
** is the HDD number.
This screen also displays the size of the HDD
the above example is 1.25TB
7

INTENTIONALLY BLANK
8

78
Press E Return Press E Return
9 HDD Connection 10 HDD Configuration.
(903 000 000) Press D Next (904 000 000) Set to Normal if not using Alarm
Press D Next Partition
11 Camera Check. 12 Camera Detection.
(905 000 000) Press D Next (906 000 000) Press C Execute
This will display the connected cameras
Press D Next
9

13 Recording Cycle. 14
(907 000 000) Set the Recording Cycle Example Press 1 to 14 Days, & Quality
Press 2 to 24 Hours
Press C Execute
15 Camera recording settings. 16 Camera recording settings overview.
(908 000 000) Calculated Recoding Rate (908 500 000) The settings are calculated
Press 5 View based on the Recording Cycle values.
Press E Return
17 18
(908 000 000) Press D Next (909 000 000) Press D Finish
Note: If required please change Recording Rate
and Picture Grade etc.
10

Start Recording
Press the REC/STOP button.
• The REC/STOP button lights up and recording starts.
To stop recording, press the REC/STOP button for more than 2 seconds.
• Recording stops and the light turns off.
Menu structure
• To ACTIVATE the MENU simply press the SETUP button on the DVR or if a mouse is being used (connected
to a USB port) left click the mouse and the DVR menu screen will be displayed. The User Menu screen will be
displayed first. To go to the next screen press the letter “D” on the front panel or with the mouse click on “NEXT”.
User Menu Setup Menu
(100 000 000) (200 000 000)
System Menu
(300 000 000)
11

MOTION ALARM RECORDING
The Instructions for the SETUP Wizard have configured the DX TL5000E to record continuous; below
we will now cover how to program Motion Alarm Recording.
SETTING MOTION DETECTION AREA:
Two patterns independent from each other are available.
Pattern A and Pattern B.
Motion A Configuration
Setup Menu
(200 000 000) Select 3 Motion Det Select 1 Set Motion Detection Pattern A
Motion A Configuration
11 Camera Select – Selects camera to be
configured for motion.
A Motion Mask Settings – Select and SET
settings:
Set to Default (as above)
Enable All
Disable All
Manual
(231 000 000)
B Sensitivity – Select Sensitivity to change
is needed to activate motion (for any of the set areas if multiple areas have been activated).
C Motion Threshold – Select number of squares which
D Reference Interval Time – Select time of how often the area set to motion will be sampled
13 Test Mode – Select Test Mode to test the set area. The colour of the dot detecting motion
changes.
14 Copy Motion B – This copies Motion B settings into the current Motion A settings.
12

Changing Motion Area
Red area is active and Blue area is inactive.
(When setting by the mouse:)
• To set the area one by one, left-click the desired
area. The area switches between active and
inactive each time you click the mouse.
• To set the multiple areas at a time, right-click the
start point of the active area (to cancel to set the
start point, left-click on the start point), and then
right-click again on the end point. The frame of
the designated area displays in yellow and the
areas being set become colour less. The area
switches between active and inactive each time
you left-click the mouse in the selected area. The
setting is completed with right-clicking on the area
outside of the designated areas after determining
active/inactive.
(When setting by the front panel buttons:)
• To set the area one by one, press M-DET AREA SET
UP (camera number 13) button and select the desired area using buttons, and then press the M-
DET DOT ON/OFF (camera number 9) button.
The area switches between active and inactive each time you press the button.
• To set the multiple areas at a time, press M-DET
AREA SET UP button and select the start point Using buttons, and then press M-DET
AREA SET UP button again. To select the end point, use buttons and then press M-DET
AREA SET UP button. The frame of the designated area displays in yellow and the area switches between
active and inactive each time you press the M-DET DOT ON/OFF button.
The setting is completed by pressing the M-DET AREA SET UP button again after determining active/
inactive.
The motion detection of this unit works by detecting the changes of brightness. So, the malfunction
due to the change of the lightning or sunlight may occur, or motion detection does not function on
the conditions such as the colours of the background and the clothes are the same.
Be sure to test Motion Detection function sufficiently.
13

Note: When change is detected continuously, some functions such as setting change are not available
because alarm recording is also continuously performed. In this case, motion detection function can be
forcibly stopped for five minutes by setting the
“Alarm Input” option 6 in the Recording Setting menu to “Off.”
You can change the settings by stopping recording during this time.
This stopping is automatically released five minutes after the operation, and registered in the system log list.
(211 000 000)
To cancel the prohibition of alarm input manually, set option 6 to “On.”
Please refer to Page 59 of the DX-TL5000E for more information.
14

Operation Example Motion Detection
Background Recording all cameras Recording Super Resolution @ 0.125pps 24hrs X 7days.
Motion Recording Super Resolution @ 6.25pps 24hrs X 7days.
Pre Alarm time 2 seconds, Post Alarm time 5 seconds.
Note: Changes to Recording Settings can not be changed while the DX-TL5000E is Recording.
1st STOP RECORDING
To stop recording, press the REC/STOP button for more than 2 seconds.
• Recording stops and the light turns off
Press SET UP or left click USB mouse button connected to front of the unit.
Programming Motion Detection
1 Setup Menu
(200 000 000) Select 1 Recording
3Recording Setting A (Normal/Timer)
2. Recording Settings
Select 1 Set Recording Pattern A (Normal/Timer) (211 000 000) Select 2 to Manual
15

4 Recording Setting A (Normal/Timer) 5 Recording Setting A (Manual)
(211 000 000) Select D Set (211 2MD 000) Set Recording Rate 0.125
for all cameras
Select D View
6 Recording Setting A-Normal 7 Recording Setting A-Normal (Manual)
(211 2MD D00) Confirm settings are correct (211 2MD 000) Select E Return
Select E Return
8 Recording Setting A (Normal/Timer) 9 Recording Setting A- Alarm
(211 000 000) Select 3 Alarm Recording Menu Select 1 to Manual
16

INTENTIONALLY BLANK
17

10 Recording Setting A- Alarm 11 Recording Setting A- Alarm (Manual)
(211 300 000) Select D Set Change settings
12 Recording Setting A- Alarm (Manual) 13 Recording Setting A- Alarm
(211 3MD 000) 1 Camera numbers (211 3MDD00) Check Settings
3 Recording Rate 6.25 Select E Return
4 Picture Grade Super
Select D View
14 Recording Setting A- Alarm (Manual) 15 Recording Setting A- Alarm
(211 3MD 000) Select E Return (211 300 000)
Select 3 change to Alarm Plus, E Return
18

16 Recording Setting A- Alarm 17
(211 300 000) Select 4 Pre-Alarm time to 2 sec (211 300 000) Select E Return
18 Recording Setting A (Normal/Timer) 19 Alarm Trigger Setting A
(211 000 000) Select 5 Alarm Trigger In/Out (211 500 000) Select 2 Change to MD-A for all
cameras
NOTE: When MD-A is turned ON the DVR Select 1 to change sensor number
will start Recording, turn Alarm Input 6 to Off SelectDView
so you can continue to change settings.
20 Alarm Trigger Setting A 21
(211 5D0 000) Select E Return (211 500 000) Select E Return
19