MIU France PepPour User manual

Thank you for buying the MIU France PepPour Pepper Mill.
Please read the following instructions carefully.
Before using the mill, please inspect it visually for any signs of manufacturing defects or flaws.
If any defect is found, please return the mill to the retailer from whom it was purchased. Any
repairs should be handled professionally to avoid any danger or injury to the user. The mill
should be returned to our Customer Service Department.
Equipping the mill with batteries:
1) Turn the bottom switch plate to the "Batteries" position. The plate will come loose from
the base of the mill.
2) Slide out the Battery Housing.
3) Place 4 AAA batteries into the Battery Housing, paying attention to the + / - markings.
4) Slide the Battery Housing back into the base.
5) Replace the switch plate and turn it to the "OFF" position.
Filling with Pepper:
1) Grasp the clear acrylic pepper receptacle and turn it clockwise to the "Unlock”
marking/position.
2) The clear acrylic receptacle will come loose from the base of the Pep Pour mill.
3) Fill the receptacle approximately %-full with your favorite peppercorns.
4) Making sure that the base switch-plate is still in the "OFF" position, invert the base and
p
lace it onto the receptacle. When seated properly, turn the mill back to the upright position
and twist the receptacle to the "LOCK" marking/position.
Operating the Mill:
1) Turn the bottom switch-plate to the "ON" position.
2) Simply turn the Pep Pour Mill over in a pouring motion and the gravity-activated switch
in the motor will turn on the grinding mechanism, dispensing freshly ground pepper onto
your favorite foods.
Adjusting the Grinding Mechanism:
1) The grinding mechanism is adjustable for coarse-to-fine settings.
2) Simply twist the knob at the top of the Pepper Receptacle to adjust for the setting you
prefer most. The tighter the knob gets, the finer the pepper.
Cleaning Instructions:
Please use a clean, dry cloth when cleaning the mill. Do not expose the mill to moisture or water.
Do not use detergents or abrasive cleansers to clean the mill. Do not put inside dishwasher.

Exchanging the Batteries:
We recommend the use of alkaline batteries for a longer life span. Standard alkaline batteries
should allow for approximately an hour of actual pepper grinding.
For best results, always exchange all four batteries at once.
Remember to discard used batteries in environmental protective containers.
Important Information and Safety Instructions:
This item is designed for use only as a pepper or rock salt mill. It can only be operated by
battery power and cannot be re-charged by any other means. Unsuitable usage of the mill for
any other purpose or function should be regarded as dangerous and may void the warranty.
The vendor and manufacturer of the mill will refuse all liability for damages that may arise from
such unsuitable usage of the mill.
The mill should be kept out of the reach of children.
The mill should not be left outdoors.
Do not place fingers or any other foreign objects, into or near the grinding mechanism.
The mill should never be put in contact with water. Do not touch or operate the mill with wet
hands. Do not submerge the mill into water and do not place ANY parts of the mill in the
dishwasher.
Warranty:
The manufacturer, MIU France, provides a one year guarantee on the electric components. We
p
rovide a lifetime guarantee on the grinding mechanism.
Any damage that results directly from normal wear and tear, irregular usage, irresponsible
handling, wrongly interpreted usage, poor maintenance or cleaning, willful destruction and
damage resulting from transport or accident as a direct result of handling by any unauthorized
p
ersons is exempt from this warranty. This warranty will only be considered if the purchase
receipt and this warranty accompany this request.
MIU, LLC.
13430 NE 16th Street
Bellevue, WA 98005
www.miu.a
t