MIVI Moonstone User manual

1. When the battery in Moonstone is running low you
will hear the voice prompt “Low Battery” and the
LED will glow solid red.
2. Plug the charging cable connected to a DC 5V
500mAh adapter in to the USB port.
3. The LED will glow solid blue when fully charged.
1.
2.
3.
4.
5.
8.
9.
12.
10.
11.
6.
7.
How to charge the Moonstone?
Welcome!
Thank you for purchasing the Mivi Moonstone Wireless Speaker.
This User Guide will assist you on how to use your Moonstone
and get the best out of its many features!
What’s Inside
1. Mivi Moonstone
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Moonstone
USER MANUAL
1. Wrist strap
2. Power button
3. Volume Up (+)
4. Volume Down (-)
5. Multi function button (MFB)
6. Microphone
7. 3.5 mm AUX input
8. MicroSD port
9. USB charge port
10. Reset button
11. Charging LED
12. Back lid
Specications
Bluetooth Connection Name: Mivi Moonstone
Model: BS10MS
Power Input: DC 5V / 1.0mA
Call / Play time: About 6 hours (70% Volume)
Charging Time: 2 to 4 hours
Bluetooth: V4.2+BR+EDR+BLE compliant
Product Size: 128*128*46mm
Frequency Response Range: 20 – 20000Hz
Bluetooth Range: Up to 10 meters
1. If you have paired your Moonstone to many devices or your
speaker is not responding you can reset the speaker.
2. To reset press the Reset button using a blunt tool for 3
seconds.
How do I reset my Moonstone? Do’s and Dont’s
To ensure safe operation and warranty coverage, please
adhere to the following rules:
1. Please note that sustained listening to music over 70%
volume is not recommended.
2. Do not drop, disassemble, open, crush, bend, puncture or
burn the Moonstone as any kind of physical damage is not
covered under warranty.
3. Do not place it close to any heat source (such as radiators,
heating equipment, stoves, or other heat-generating
equipment).
4. Before wiping with a dry cloth, switch it o and unplug the
power cord from the power outlet.
How to Claim Mivi Warranty?
Mivi Moonstone is covered with 1 year warranty against
manufacturing defects. In case you would like to claim
warranty please send an email with details of the issue you are
facing and order information to the Mivi support email:
[email protected]
Reset button
To ensure optimum play time and safe
charging for your Moonstone please make
sure you use certied chargers and cables.
Mivi Bluetooth Earphones
Mivi Moonstone is a perfect to take your small intimate parties
to a whole new level of entertainment. If you would like to share
the pleasure of pure sound here are a few Mivi oerings which
are guaranteed to sound music to your ears.
A world of entertainment...
www.mivi.in
Mivi earphones are guaranteed to play a personalised sonata
composing a world of enterainment in your ears. Visit mivi.in to
know more details of our products specically designed for the
audiophile in you.

How to power ON/OFF?
Press & Hold the power button for 1 second until the
LED glows blue.
Press & Hold
Power button
LED
glows blue
Press & Hold the power button for 3 seconds until
the LED turns o.
3. Search for “Mivi Moonstone” in the
Bluetooth discovery list and tap to
connect.
4. The LED will glow blue every
3 seconds if it has successfully
connected.
Your Moonstone will auto-recon-
nect to your device if you have
paired it earlier.
How to connect a device?
Mivi Moonstone Mivi Moonstone
1. Power on your Moonstone to automatically enter pairing
mode. The LED blinks blue.
When the music is playing, press the MFB button to pause
the music. Please press it again to resume playing.
How to Play/Pause music?
Press MFB to
pause/resume playing
Volume Up (+)
Volume Down (-)
Press the Volume Down (-) decrease the volume.
Press the Volume Up (+) button for increase it.
How to control the volume?
Press & Hold
Volume Up (+) for 1 second
Press & Hold
Volume Down (-) for 1 second
How to Skip to the Previous/Next track?
Press & Hold the Volume Down (-) button for 1 second
to play the PREVIOUS track.
Press & Hold the Volume Up (+) button for 1 second
to play the NEXT track.
Press the MFB button to ANSWER an incoming call.
Press it again to END the call.
How to Answer and End Incoming calls?
Press & Hold the MFB for 1 second to
ignore an incoming call.
How to Ignore Incoming calls?
1. If you have already paired
a Moonstone with your
device rst unpair it by
going to the Bluetooth
discovery list and tap Mivi
Moonstone to disconnect.
2. Press & Hold the MFB
button on any one speaker
for 5 seconds to connect
both the Moonstone
together.
3. Search for Mivi
Moonstone in the
Bluetooth discovery list
and tap to connect.
4. Now both speakers are
connected for you to
enjoy true
wireless sound.
How to connect 2 speakers together?
Press & Hold power button
for 1 second
LED
glows blue
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press
MFB button
Press & Hold
MFB button 1 second
Press MFB button
for 2 seconds
1. Insert the memory card in the MicroSD port.
2. Power on your Moonstone.
3. After the Moonstone powers on press the Power
button to toggle between Bluetooth and Memory
card.
How do I play songs from my memory card?
1. Power on your Moonstone.
2. Plug in one end of the Aux cable in the Moonstone and the
other in a compatible device.
3. Now you can play music from your device using the
Moonstone.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
MFB button 5 seconds
Mivi Moonstone Mivi Moonstone

How to power ON/OFF?
Press & Hold the power button for 1 second until the
LED glows blue.
Press & Hold
Power button
LED
glows blue
Press & Hold the power button for 3 seconds until
the LED turns o.
3. Search for “Mivi Moonstone” in the
Bluetooth discovery list and tap to
connect.
4. The LED will glow blue every
3 seconds if it has successfully
connected.
Your Moonstone will auto-recon-
nect to your device if you have
paired it earlier.
How to connect a device?
Mivi Moonstone Mivi Moonstone
1. Power on your Moonstone to automatically enter pairing
mode. The LED blinks blue.
When the music is playing, press the MFB button to pause
the music. Please press it again to resume playing.
How to Play/Pause music?
Press MFB to
pause/resume playing
Volume Up (+)
Volume Down (-)
Press the Volume Down (-) decrease the volume.
Press the Volume Up (+) button for increase it.
How to control the volume?
Press & Hold
Volume Up (+) for 1 second
Press & Hold
Volume Down (-) for 1 second
How to Skip to the Previous/Next track?
Press & Hold the Volume Down (-) button for 1 second
to play the PREVIOUS track.
Press & Hold the Volume Up (+) button for 1 second
to play the NEXT track.
Press the MFB button to ANSWER an incoming call.
Press it again to END the call.
How to Answer and End Incoming calls?
Press & Hold the MFB for 1 second to
ignore an incoming call.
How to Ignore Incoming calls?
1. If you have already paired
a Moonstone with your
device rst unpair it by
going to the Bluetooth
discovery list and tap Mivi
Moonstone to disconnect.
2. Press & Hold the MFB
button on any one speaker
for 5 seconds to connect
both the Moonstone
together.
3. Search for Mivi
Moonstone in the
Bluetooth discovery list
and tap to connect.
4. Now both speakers are
connected for you to
enjoy true
wireless sound.
How to connect 2 speakers together?
Press & Hold power button
for 1 second
LED
glows blue
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press
MFB button
Press & Hold
MFB button 1 second
Press MFB button
for 2 seconds
1. Insert the memory card in the MicroSD port.
2. Power on your Moonstone.
3. After the Moonstone powers on press the Power
button to toggle between Bluetooth and Memory
card.
How do I play songs from my memory card?
1. Power on your Moonstone.
2. Plug in one end of the Aux cable in the Moonstone and the
other in a compatible device.
3. Now you can play music from your device using the
Moonstone.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
MFB button 5 seconds
Mivi Moonstone Mivi Moonstone

How to power ON/OFF?
Press & Hold the power button for 1 second until the
LED glows blue.
Press & Hold
Power button
LED
glows blue
Press & Hold the power button for 3 seconds until
the LED turns o.
3. Search for “Mivi Moonstone” in the
Bluetooth discovery list and tap to
connect.
4. The LED will glow blue every
3 seconds if it has successfully
connected.
Your Moonstone will auto-recon-
nect to your device if you have
paired it earlier.
How to connect a device?
Mivi Moonstone Mivi Moonstone
1. Power on your Moonstone to automatically enter pairing
mode. The LED blinks blue.
When the music is playing, press the MFB button to pause
the music. Please press it again to resume playing.
How to Play/Pause music?
Press MFB to
pause/resume playing
Volume Up (+)
Volume Down (-)
Press the Volume Down (-) decrease the volume.
Press the Volume Up (+) button for increase it.
How to control the volume?
Press & Hold
Volume Up (+) for 1 second
Press & Hold
Volume Down (-) for 1 second
How to Skip to the Previous/Next track?
Press & Hold the Volume Down (-) button for 1 second
to play the PREVIOUS track.
Press & Hold the Volume Up (+) button for 1 second
to play the NEXT track.
Press the MFB button to ANSWER an incoming call.
Press it again to END the call.
How to Answer and End Incoming calls?
Press & Hold the MFB for 1 second to
ignore an incoming call.
How to Ignore Incoming calls?
1. If you have already paired
a Moonstone with your
device rst unpair it by
going to the Bluetooth
discovery list and tap Mivi
Moonstone to disconnect.
2. Press & Hold the MFB
button on any one speaker
for 5 seconds to connect
both the Moonstone
together.
3. Search for Mivi
Moonstone in the
Bluetooth discovery list
and tap to connect.
4. Now both speakers are
connected for you to
enjoy true
wireless sound.
How to connect 2 speakers together?
Press & Hold power button
for 1 second
LED
glows blue
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press
MFB button
Press & Hold
MFB button 1 second
Press MFB button
for 2 seconds
1. Insert the memory card in the MicroSD port.
2. Power on your Moonstone.
3. After the Moonstone powers on press the Power
button to toggle between Bluetooth and Memory
card.
How do I play songs from my memory card?
1. Power on your Moonstone.
2. Plug in one end of the Aux cable in the Moonstone and the
other in a compatible device.
3. Now you can play music from your device using the
Moonstone.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
MFB button 5 seconds
Mivi Moonstone Mivi Moonstone

How to power ON/OFF?
Press & Hold the power button for 1 second until the
LED glows blue.
Press & Hold
Power button
LED
glows blue
Press & Hold the power button for 3 seconds until
the LED turns o.
3. Search for “Mivi Moonstone” in the
Bluetooth discovery list and tap to
connect.
4. The LED will glow blue every
3 seconds if it has successfully
connected.
Your Moonstone will auto-recon-
nect to your device if you have
paired it earlier.
How to connect a device?
Mivi Moonstone Mivi Moonstone
1. Power on your Moonstone to automatically enter pairing
mode. The LED blinks blue.
When the music is playing, press the MFB button to pause
the music. Please press it again to resume playing.
How to Play/Pause music?
Press MFB to
pause/resume playing
Volume Up (+)
Volume Down (-)
Press the Volume Down (-) decrease the volume.
Press the Volume Up (+) button for increase it.
How to control the volume?
Press & Hold
Volume Up (+) for 1 second
Press & Hold
Volume Down (-) for 1 second
How to Skip to the Previous/Next track?
Press & Hold the Volume Down (-) button for 1 second
to play the PREVIOUS track.
Press & Hold the Volume Up (+) button for 1 second
to play the NEXT track.
Press the MFB button to ANSWER an incoming call.
Press it again to END the call.
How to Answer and End Incoming calls?
Press & Hold the MFB for 1 second to
ignore an incoming call.
How to Ignore Incoming calls?
1. If you have already paired
a Moonstone with your
device rst unpair it by
going to the Bluetooth
discovery list and tap Mivi
Moonstone to disconnect.
2. Press & Hold the MFB
button on any one speaker
for 5 seconds to connect
both the Moonstone
together.
3. Search for Mivi
Moonstone in the
Bluetooth discovery list
and tap to connect.
4. Now both speakers are
connected for you to
enjoy true
wireless sound.
How to connect 2 speakers together?
Press & Hold power button
for 1 second
LED
glows blue
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press
MFB button
Press & Hold
MFB button 1 second
Press MFB button
for 2 seconds
1. Insert the memory card in the MicroSD port.
2. Power on your Moonstone.
3. After the Moonstone powers on press the Power
button to toggle between Bluetooth and Memory
card.
How do I play songs from my memory card?
1. Power on your Moonstone.
2. Plug in one end of the Aux cable in the Moonstone and the
other in a compatible device.
3. Now you can play music from your device using the
Moonstone.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
MFB button 5 seconds
Mivi Moonstone Mivi Moonstone

1. When the battery in Moonstone is running low you
will hear the voice prompt “Low Battery” and the
LED will glow solid red.
2. Plug the charging cable connected to a DC 5V
500mAh adapter in to the USB port.
3. The LED will glow solid blue when fully charged.
1.
2.
3.
4.
5.
8.
9.
12.
10.
11.
6.
7.
How to charge the Moonstone?
Welcome!
Thank you for purchasing the Mivi Moonstone Wireless Speaker.
This User Guide will assist you on how to use your Moonstone
and get the best out of its many features!
What’s Inside
1. Mivi Moonstone
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Moonstone
USER MANUAL
1. Wrist strap
2. Power button
3. Volume Up (+)
4. Volume Down (-)
5. Multi function button (MFB)
6. Microphone
7. 3.5 mm AUX input
8. MicroSD port
9. USB charge port
10. Reset button
11. Charging LED
12. Back lid
Specications
Bluetooth Connection Name: Mivi Moonstone
Model: BS10MS
Power Input: DC 5V / 1.0mA
Call / Play time: About 6 hours (70% Volume)
Charging Time: 2 to 4 hours
Bluetooth: V4.2+BR+EDR+BLE compliant
Product Size: 128*128*46mm
Frequency Response Range: 20 – 20000Hz
Bluetooth Range: Up to 10 meters
1. If you have paired your Moonstone to many devices or your
speaker is not responding you can reset the speaker.
2. To reset press the Reset button using a blunt tool for 3
seconds.
How do I reset my Moonstone? Do’s and Dont’s
To ensure safe operation and warranty coverage, please
adhere to the following rules:
1. Please note that sustained listening to music over 70%
volume is not recommended.
2. Do not drop, disassemble, open, crush, bend, puncture or
burn the Moonstone as any kind of physical damage is not
covered under warranty.
3. Do not place it close to any heat source (such as radiators,
heating equipment, stoves, or other heat-generating
equipment).
4. Before wiping with a dry cloth, switch it o and unplug the
power cord from the power outlet.
How to Claim Mivi Warranty?
Mivi Moonstone is covered with 1 year warranty against
manufacturing defects. In case you would like to claim
warranty please send an email with details of the issue you are
facing and order information to the Mivi support email:
suppor[email protected]
Reset button
To ensure optimum play time and safe
charging for your Moonstone please make
sure you use certied chargers and cables.
Mivi Bluetooth Earphones
Mivi Moonstone is a perfect to take your small intimate parties
to a whole new level of entertainment. If you would like to share
the pleasure of pure sound here are a few Mivi oerings which
are guaranteed to sound music to your ears.
A world of entertainment...
www.mivi.in
Mivi earphones are guaranteed to play a personalised sonata
composing a world of enterainment in your ears. Visit mivi.in to
know more details of our products specically designed for the
audiophile in you.

1. When the battery in Moonstone is running low you
will hear the voice prompt “Low Battery” and the
LED will glow solid red.
2. Plug the charging cable connected to a DC 5V
500mAh adapter in to the USB port.
3. The LED will glow solid blue when fully charged.
1.
2.
3.
4.
5.
8.
9.
12.
10.
11.
6.
7.
How to charge the Moonstone?
Welcome!
Thank you for purchasing the Mivi Moonstone Wireless Speaker.
This User Guide will assist you on how to use your Moonstone
and get the best out of its many features!
What’s Inside
1. Mivi Moonstone
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Moonstone
USER MANUAL
1. Wrist strap
2. Power button
3. Volume Up (+)
4. Volume Down (-)
5. Multi function button (MFB)
6. Microphone
7. 3.5 mm AUX input
8. MicroSD port
9. USB charge port
10. Reset button
11. Charging LED
12. Back lid
Specications
Bluetooth Connection Name: Mivi Moonstone
Model: BS10MS
Power Input: DC 5V / 1.0mA
Call / Play time: About 6 hours (70% Volume)
Charging Time: 2 to 4 hours
Bluetooth: V4.2+BR+EDR+BLE compliant
Product Size: 128*128*46mm
Frequency Response Range: 20 – 20000Hz
Bluetooth Range: Up to 10 meters
1. If you have paired your Moonstone to many devices or your
speaker is not responding you can reset the speaker.
2. To reset press the Reset button using a blunt tool for 3
seconds.
How do I reset my Moonstone? Do’s and Dont’s
To ensure safe operation and warranty coverage, please
adhere to the following rules:
1. Please note that sustained listening to music over 70%
volume is not recommended.
2. Do not drop, disassemble, open, crush, bend, puncture or
burn the Moonstone as any kind of physical damage is not
covered under warranty.
3. Do not place it close to any heat source (such as radiators,
heating equipment, stoves, or other heat-generating
equipment).
4. Before wiping with a dry cloth, switch it o and unplug the
power cord from the power outlet.
How to Claim Mivi Warranty?
Mivi Moonstone is covered with 1 year warranty against
manufacturing defects. In case you would like to claim
warranty please send an email with details of the issue you are
facing and order information to the Mivi support email:
[email protected]
Reset button
To ensure optimum play time and safe
charging for your Moonstone please make
sure you use certied chargers and cables.
Mivi Bluetooth Earphones
Mivi Moonstone is a perfect to take your small intimate parties
to a whole new level of entertainment. If you would like to share
the pleasure of pure sound here are a few Mivi oerings which
are guaranteed to sound music to your ears.
A world of entertainment...
www.mivi.in
Mivi earphones are guaranteed to play a personalised sonata
composing a world of enterainment in your ears. Visit mivi.in to
know more details of our products specically designed for the
audiophile in you.

1. When the battery in Moonstone is running low you
will hear the voice prompt “Low Battery” and the
LED will glow solid red.
2. Plug the charging cable connected to a DC 5V
500mAh adapter in to the USB port.
3. The LED will glow solid blue when fully charged.
1.
2.
3.
4.
5.
8.
9.
12.
10.
11.
6.
7.
How to charge the Moonstone?
Welcome!
Thank you for purchasing the Mivi Moonstone Wireless Speaker.
This User Guide will assist you on how to use your Moonstone
and get the best out of its many features!
What’s Inside
1. Mivi Moonstone
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Moonstone
USER MANUAL
1. Wrist strap
2. Power button
3. Volume Up (+)
4. Volume Down (-)
5. Multi function button (MFB)
6. Microphone
7. 3.5 mm AUX input
8. MicroSD port
9. USB charge port
10. Reset button
11. Charging LED
12. Back lid
Specications
Bluetooth Connection Name: Mivi Moonstone
Model: BS10MS
Power Input: DC 5V / 1.0mA
Call / Play time: About 6 hours (70% Volume)
Charging Time: 2 to 4 hours
Bluetooth: V4.2+BR+EDR+BLE compliant
Product Size: 128*128*46mm
Frequency Response Range: 20 – 20000Hz
Bluetooth Range: Up to 10 meters
1. If you have paired your Moonstone to many devices or your
speaker is not responding you can reset the speaker.
2. To reset press the Reset button using a blunt tool for 3
seconds.
How do I reset my Moonstone? Do’s and Dont’s
To ensure safe operation and warranty coverage, please
adhere to the following rules:
1. Please note that sustained listening to music over 70%
volume is not recommended.
2. Do not drop, disassemble, open, crush, bend, puncture or
burn the Moonstone as any kind of physical damage is not
covered under warranty.
3. Do not place it close to any heat source (such as radiators,
heating equipment, stoves, or other heat-generating
equipment).
4. Before wiping with a dry cloth, switch it o and unplug the
power cord from the power outlet.
How to Claim Mivi Warranty?
Mivi Moonstone is covered with 1 year warranty against
manufacturing defects. In case you would like to claim
warranty please send an email with details of the issue you are
facing and order information to the Mivi support email:
[email protected]
Reset button
To ensure optimum play time and safe
charging for your Moonstone please make
sure you use certied chargers and cables.
Mivi Bluetooth Earphones
Mivi Moonstone is a perfect to take your small intimate parties
to a whole new level of entertainment. If you would like to share
the pleasure of pure sound here are a few Mivi oerings which
are guaranteed to sound music to your ears.
A world of entertainment...
www.mivi.in
Mivi earphones are guaranteed to play a personalised sonata
composing a world of enterainment in your ears. Visit mivi.in to
know more details of our products specically designed for the
audiophile in you.