MIVI Octave 2 User manual

3
2
1
9
11
710
8
6
5
4
Welcome!
Thank you for purchasing the Mivi Octave 2 Wireless Speaker. This User Guide will assist you on how to
use your Octave2 and get the best out of its many features!
What’s Inside
1. Mivi Octave 2
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Octave 2
USER MANUAL
1. Microphone.
2. +: Volume up button: next song, increase the volume.
3. -: Volume down button: previous song, decrease the volume.
4. Bluetooth Indicator.
5. Power button: power on/o, switch the playing mode, reset.
6. Pause button: play, pause, answer call, TWS.
7. AUX IN port.
8. Type-C charging port.
9. LED indicator.
10. TF card slot.
11. Lanyard.
1. When the battery in Octave 2 is running low you will hear the voice prompt“Low Battery” and the LED
will glow solid red.
2. Plug the type C charging cable connected to a DC 5V 0.5A or 1A adapter into the USB port.
3. The LED will turn o when fully charged.
How to charge the Octave 2?
How to Claim Mivi Warranty?
Mivi Octave 2 is covered with 1 year warranty against manufacturing defects. In
case you would like to claim warranty please send an email with details of the issue
you are facing and order information to the Mivi support email:
[email protected]
To ensure optimum play time and safe charging
for your Octave 2 please make sure you use
certied chargers and cables.
Hold the power button for 6 seconds to automatically reset
the speaker and turn it o .
How do I reset my Octave 2?
1. Insert the memory card in the MicroSD port.
2. Turn on your Octave 2.
3. After the Octave 2 turns on, press the Power button
to toggle between Bluetooth and Memory card.
How do I play songs from my memory card?
1. Power on your Octave 2.
2. Plug in one end of the Aux cable in the Octave 2 and the other in a compatible device.
3. Now you can play music from your device using the Octave 2.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
power button
for 6 seconds
Do’s and Dont’s
To ensure safe operation and warranty coverage, please adhere to the following rules:
1. Do not drop, disassemble, open, crush, bend, puncture or burn the Octave 2 as any kind of
physical damage is not covered under warranty.
2. Do not place it close to any heat source (such as radiators, heating equipment, stoves, or other
heat-generating equipment).
3. Before wiping with a dry cloth, switch it o and unplug the power cord from the power outlet.
But that's not all!
Mivi Zero is a compactly designed, go-to
speaker for an intimate aair with yourself!
Mivi comes with a range of other products to redene your lifestyle and jazz up your way of listening
to music. Check out our other bestsellers at:
mivi.in

How to power ON/OFF?
1. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power ON.’
2. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power OFF.’
Your Octave 2 will auto reconnect to your device if
you have paired it earlier.
How to connect a device?
Mivi Octave 2 Mivi Octave 2
1. Turn your Octave 2 on.
2. Press & Hold the power button for 3 seconds to enter pairing
mode. The LED blinks blue.
LED
glows blue
Press & Hold power button
for 3 second
LED
glows blue
Press & Hold power button
for 3 seconds
3. Search for“Mivi Octave 2”in the Bluetooth discovery list and tap to connect.
4. The LED will glow blue if it has successfully connected.
When the music is playing, press the MFB button to pause and press it
again to resume playing.
1. Press the Volume Down (-) button to decrease the volume.
2. Press the Volume Up (+) button to increase it.
How to Play/Pause music?
Press MFB to
pause/resume playing
How to control the volume?
Volume Down (-)
Volume Up (+)
Presss & Hold
Volume Down (-)
for 1 second
Press & Hold
Volume Up (+)
for 1 second
1. Long Press & Hold the Volume Up (+) button to play the NEXT track.
2. Long Press & Hold the Volume Up (-) button to play the PREVIOUS
track.
How to Skip to the Previous/Next track?
Press MFB
to Answer / End calls
Double press MFB
to dile last number
Press & Hold
MFB button 1 second
Short press the MFB button to ANSWER an incoming call.
Short press the MFB button to END the call.
How to Answer and End Incoming calls?
Double press the MFB button to call the last dialed number.
How to Re-dial the last number?
Press & Hold the MFB for 1 second to ignore an incoming call.
How to Ignore Incoming calls?
Mivi Octave 2 Mivi Octave 2
Press
MFB button 2 second
How to connect two Octave 2 speakers with one device at the same time?
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press & Hold
MFB button 5 seconds
1. If you have already paired an Octave 2 with your device rst
unpair it by going to the Bluetooth discovery list and tap Mivi
Octave 2 to disconnect.
2. Turn the second speaker on.
3. Press & Hold the MFB button on any one speaker for 5 seconds
to connect both the Octave 2 together.
4. Search for Mivi Octave 2 in the Bluetooth discovery list and tap
to connect.
5. Now both speakers are connected for you to enjoy true
wireless sound.

How to power ON/OFF?
1. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power ON.’
2. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power OFF.’
Your Octave 2 will auto reconnect to your device if
you have paired it earlier.
How to connect a device?
Mivi Octave 2 Mivi Octave 2
1. Turn your Octave 2 on.
2. Press & Hold the power button for 3 seconds to enter pairing
mode. The LED blinks blue.
LED
glows blue
Press & Hold power button
for 3 second
LED
glows blue
Press & Hold power button
for 3 seconds
3. Search for“Mivi Octave 2”in the Bluetooth discovery list and tap to connect.
4. The LED will glow blue if it has successfully connected.
When the music is playing, press the MFB button to pause and press it
again to resume playing.
1. Press the Volume Down (-) button to decrease the volume.
2. Press the Volume Up (+) button to increase it.
How to Play/Pause music?
Press MFB to
pause/resume playing
How to control the volume?
Volume Down (-)
Volume Up (+)
Presss & Hold
Volume Down (-)
for 1 second
Press & Hold
Volume Up (+)
for 1 second
1. Long Press & Hold the Volume Up (+) button to play the NEXT track.
2. Long Press & Hold the Volume Up (-) button to play the PREVIOUS
track.
How to Skip to the Previous/Next track?
Press MFB
to Answer / End calls
Double press MFB
to dile last number
Press & Hold
MFB button 1 second
Short press the MFB button to ANSWER an incoming call.
Short press the MFB button to END the call.
How to Answer and End Incoming calls?
Double press the MFB button to call the last dialed number.
How to Re-dial the last number?
Press & Hold the MFB for 1 second to ignore an incoming call.
How to Ignore Incoming calls?
Mivi Octave 2 Mivi Octave 2
Press
MFB button 2 second
How to connect two Octave 2 speakers with one device at the same time?
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press & Hold
MFB button 5 seconds
1. If you have already paired an Octave 2 with your device rst
unpair it by going to the Bluetooth discovery list and tap Mivi
Octave 2 to disconnect.
2. Turn the second speaker on.
3. Press & Hold the MFB button on any one speaker for 5 seconds
to connect both the Octave 2 together.
4. Search for Mivi Octave 2 in the Bluetooth discovery list and tap
to connect.
5. Now both speakers are connected for you to enjoy true
wireless sound.

How to power ON/OFF?
1. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power ON.’
2. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power OFF.’
Your Octave 2 will auto reconnect to your device if
you have paired it earlier.
How to connect a device?
Mivi Octave 2 Mivi Octave 2
1. Turn your Octave 2 on.
2. Press & Hold the power button for 3 seconds to enter pairing
mode. The LED blinks blue.
LED
glows blue
Press & Hold power button
for 3 second
LED
glows blue
Press & Hold power button
for 3 seconds
3. Search for“Mivi Octave 2”in the Bluetooth discovery list and tap to connect.
4. The LED will glow blue if it has successfully connected.
When the music is playing, press the MFB button to pause and press it
again to resume playing.
1. Press the Volume Down (-) button to decrease the volume.
2. Press the Volume Up (+) button to increase it.
How to Play/Pause music?
Press MFB to
pause/resume playing
How to control the volume?
Volume Down (-)
Volume Up (+)
Presss & Hold
Volume Down (-)
for 1 second
Press & Hold
Volume Up (+)
for 1 second
1. Long Press & Hold the Volume Up (+) button to play the NEXT track.
2. Long Press & Hold the Volume Up (-) button to play the PREVIOUS
track.
How to Skip to the Previous/Next track?
Press MFB
to Answer / End calls
Double press MFB
to dile last number
Press & Hold
MFB button 1 second
Short press the MFB button to ANSWER an incoming call.
Short press the MFB button to END the call.
How to Answer and End Incoming calls?
Double press the MFB button to call the last dialed number.
How to Re-dial the last number?
Press & Hold the MFB for 1 second to ignore an incoming call.
How to Ignore Incoming calls?
Mivi Octave 2 Mivi Octave 2
Press
MFB button 2 second
How to connect two Octave 2 speakers with one device at the same time?
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press & Hold
MFB button 5 seconds
1. If you have already paired an Octave 2 with your device rst
unpair it by going to the Bluetooth discovery list and tap Mivi
Octave 2 to disconnect.
2. Turn the second speaker on.
3. Press & Hold the MFB button on any one speaker for 5 seconds
to connect both the Octave 2 together.
4. Search for Mivi Octave 2 in the Bluetooth discovery list and tap
to connect.
5. Now both speakers are connected for you to enjoy true
wireless sound.

How to power ON/OFF?
1. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power ON.’
2. Press & Hold the power button for 3 seconds until the LED glows blue
and voice prompt says ‘Power OFF.’
Your Octave 2 will auto reconnect to your device if
you have paired it earlier.
How to connect a device?
Mivi Octave 2 Mivi Octave 2
1. Turn your Octave 2 on.
2. Press & Hold the power button for 3 seconds to enter pairing
mode. The LED blinks blue.
LED
glows blue
Press & Hold power button
for 3 second
LED
glows blue
Press & Hold power button
for 3 seconds
3. Search for“Mivi Octave 2”in the Bluetooth discovery list and tap to connect.
4. The LED will glow blue if it has successfully connected.
When the music is playing, press the MFB button to pause and press it
again to resume playing.
1. Press the Volume Down (-) button to decrease the volume.
2. Press the Volume Up (+) button to increase it.
How to Play/Pause music?
Press MFB to
pause/resume playing
How to control the volume?
Volume Down (-)
Volume Up (+)
Presss & Hold
Volume Down (-)
for 1 second
Press & Hold
Volume Up (+)
for 1 second
1. Long Press & Hold the Volume Up (+) button to play the NEXT track.
2. Long Press & Hold the Volume Up (-) button to play the PREVIOUS
track.
How to Skip to the Previous/Next track?
Press MFB
to Answer / End calls
Double press MFB
to dile last number
Press & Hold
MFB button 1 second
Short press the MFB button to ANSWER an incoming call.
Short press the MFB button to END the call.
How to Answer and End Incoming calls?
Double press the MFB button to call the last dialed number.
How to Re-dial the last number?
Press & Hold the MFB for 1 second to ignore an incoming call.
How to Ignore Incoming calls?
Mivi Octave 2 Mivi Octave 2
Press
MFB button 2 second
How to connect two Octave 2 speakers with one device at the same time?
1. If the speakers are in TWS mode they will automatically pair to
each other when they are powered on.
2. To disconnect press the MFB button for 2 seconds.
How to disconnect TWS?
Press & Hold
MFB button 5 seconds
1. If you have already paired an Octave 2 with your device rst
unpair it by going to the Bluetooth discovery list and tap Mivi
Octave 2 to disconnect.
2. Turn the second speaker on.
3. Press & Hold the MFB button on any one speaker for 5 seconds
to connect both the Octave 2 together.
4. Search for Mivi Octave 2 in the Bluetooth discovery list and tap
to connect.
5. Now both speakers are connected for you to enjoy true
wireless sound.

3
2
1
9
11
710
8
6
5
4
Welcome!
Thank you for purchasing the Mivi Octave 2 Wireless Speaker. This User Guide will assist you on how to
use your Octave2 and get the best out of its many features!
What’s Inside
1. Mivi Octave 2
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Octave 2
USER MANUAL
1. Microphone.
2. +: Volume up button: next song, increase the volume.
3. -: Volume down button: previous song, decrease the volume.
4. Bluetooth Indicator.
5. Power button: power on/o, switch the playing mode, reset.
6. Pause button: play, pause, answer call, TWS.
7. AUX IN port.
8. Type-C charging port.
9. LED indicator.
10. TF card slot.
11. Lanyard.
1. When the battery in Octave 2 is running low you will hear the voice prompt“Low Battery” and the LED
will glow solid red.
2. Plug the type C charging cable connected to a DC 5V 0.5A or 1A adapter into the USB port.
3. The LED will turn o when fully charged.
How to charge the Octave 2?
How to Claim Mivi Warranty?
Mivi Octave 2 is covered with 1 year warranty against manufacturing defects. In
case you would like to claim warranty please send an email with details of the issue
you are facing and order information to the Mivi support email:
suppor[email protected]
To ensure optimum play time and safe charging
for your Octave 2 please make sure you use
certied chargers and cables.
Hold the power button for 6 seconds to automatically reset
the speaker and turn it o .
How do I reset my Octave 2?
1. Insert the memory card in the MicroSD port.
2. Turn on your Octave 2.
3. After the Octave 2 turns on, press the Power button
to toggle between Bluetooth and Memory card.
How do I play songs from my memory card?
1. Power on your Octave 2.
2. Plug in one end of the Aux cable in the Octave 2 and the other in a compatible device.
3. Now you can play music from your device using the Octave 2.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
power button
for 6 seconds
Do’s and Dont’s
To ensure safe operation and warranty coverage, please adhere to the following rules:
1. Do not drop, disassemble, open, crush, bend, puncture or burn the Octave 2 as any kind of
physical damage is not covered under warranty.
2. Do not place it close to any heat source (such as radiators, heating equipment, stoves, or other
heat-generating equipment).
3. Before wiping with a dry cloth, switch it o and unplug the power cord from the power outlet.
But that's not all!
Mivi Zero is a compactly designed, go-to
speaker for an intimate aair with yourself!
Mivi comes with a range of other products to redene your lifestyle and jazz up your way of listening
to music. Check out our other bestsellers at:
mivi.in

3
2
1
9
11
710
8
6
5
4
Welcome!
Thank you for purchasing the Mivi Octave 2 Wireless Speaker. This User Guide will assist you on how to
use your Octave2 and get the best out of its many features!
What’s Inside
1. Mivi Octave 2
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Octave 2
USER MANUAL
1. Microphone.
2. +: Volume up button: next song, increase the volume.
3. -: Volume down button: previous song, decrease the volume.
4. Bluetooth Indicator.
5. Power button: power on/o, switch the playing mode, reset.
6. Pause button: play, pause, answer call, TWS.
7. AUX IN port.
8. Type-C charging port.
9. LED indicator.
10. TF card slot.
11. Lanyard.
1. When the battery in Octave 2 is running low you will hear the voice prompt“Low Battery” and the LED
will glow solid red.
2. Plug the type C charging cable connected to a DC 5V 0.5A or 1A adapter into the USB port.
3. The LED will turn o when fully charged.
How to charge the Octave 2?
How to Claim Mivi Warranty?
Mivi Octave 2 is covered with 1 year warranty against manufacturing defects. In
case you would like to claim warranty please send an email with details of the issue
you are facing and order information to the Mivi support email:
[email protected]
To ensure optimum play time and safe charging
for your Octave 2 please make sure you use
certied chargers and cables.
Hold the power button for 6 seconds to automatically reset
the speaker and turn it o .
How do I reset my Octave 2?
1. Insert the memory card in the MicroSD port.
2. Turn on your Octave 2.
3. After the Octave 2 turns on, press the Power button
to toggle between Bluetooth and Memory card.
How do I play songs from my memory card?
1. Power on your Octave 2.
2. Plug in one end of the Aux cable in the Octave 2 and the other in a compatible device.
3. Now you can play music from your device using the Octave 2.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
power button
for 6 seconds
Do’s and Dont’s
To ensure safe operation and warranty coverage, please adhere to the following rules:
1. Do not drop, disassemble, open, crush, bend, puncture or burn the Octave 2 as any kind of
physical damage is not covered under warranty.
2. Do not place it close to any heat source (such as radiators, heating equipment, stoves, or other
heat-generating equipment).
3. Before wiping with a dry cloth, switch it o and unplug the power cord from the power outlet.
But that's not all!
Mivi Zero is a compactly designed, go-to
speaker for an intimate aair with yourself!
Mivi comes with a range of other products to redene your lifestyle and jazz up your way of listening
to music. Check out our other bestsellers at:
mivi.in

3
2
1
9
11
710
8
6
5
4
Welcome!
Thank you for purchasing the Mivi Octave 2 Wireless Speaker. This User Guide will assist you on how to
use your Octave2 and get the best out of its many features!
What’s Inside
1. Mivi Octave 2
2. Charging Cable
3. AUX Cable
Unit at a glance
Wireless Speaker
Octave 2
USER MANUAL
1. Microphone.
2. +: Volume up button: next song, increase the volume.
3. -: Volume down button: previous song, decrease the volume.
4. Bluetooth Indicator.
5. Power button: power on/o, switch the playing mode, reset.
6. Pause button: play, pause, answer call, TWS.
7. AUX IN port.
8. Type-C charging port.
9. LED indicator.
10. TF card slot.
11. Lanyard.
1. When the battery in Octave 2 is running low you will hear the voice prompt“Low Battery” and the LED
will glow solid red.
2. Plug the type C charging cable connected to a DC 5V 0.5A or 1A adapter into the USB port.
3. The LED will turn o when fully charged.
How to charge the Octave 2?
How to Claim Mivi Warranty?
Mivi Octave 2 is covered with 1 year warranty against manufacturing defects. In
case you would like to claim warranty please send an email with details of the issue
you are facing and order information to the Mivi support email:
[email protected]
To ensure optimum play time and safe charging
for your Octave 2 please make sure you use
certied chargers and cables.
Hold the power button for 6 seconds to automatically reset
the speaker and turn it o .
How do I reset my Octave 2?
1. Insert the memory card in the MicroSD port.
2. Turn on your Octave 2.
3. After the Octave 2 turns on, press the Power button
to toggle between Bluetooth and Memory card.
How do I play songs from my memory card?
1. Power on your Octave 2.
2. Plug in one end of the Aux cable in the Octave 2 and the other in a compatible device.
3. Now you can play music from your device using the Octave 2.
How do I play songs using my Aux cable?
Press power
button
Press & Hold
power button
for 6 seconds
Do’s and Dont’s
To ensure safe operation and warranty coverage, please adhere to the following rules:
1. Do not drop, disassemble, open, crush, bend, puncture or burn the Octave 2 as any kind of
physical damage is not covered under warranty.
2. Do not place it close to any heat source (such as radiators, heating equipment, stoves, or other
heat-generating equipment).
3. Before wiping with a dry cloth, switch it o and unplug the power cord from the power outlet.
But that's not all!
Mivi Zero is a compactly designed, go-to
speaker for an intimate aair with yourself!
Mivi comes with a range of other products to redene your lifestyle and jazz up your way of listening
to music. Check out our other bestsellers at:
mivi.in