Mixtile GENA Instruction Manual

GENA
DESIGN GUIDELINE OF
ACCESSORIES
www.Mixtile.com

1、To get the accurate thickness of the cover, you must make a hole in the middle
of the front cover as large as GENA’s screen. Then the front cover needs to
cover the edges of the screen. So it is suggested that each side of the hole
should be 1mm longer than each side of the screen.
LCD display area
0.5
2、If you use metal to make cases, please avoid the antenna on the GENA.
Antenna

3、If you make metal cases for GENA, please make four metal key contacting with
FPC golden fingers in order to do ESD protection.
The back side of the shell
ESD
4、When making holes for USB jack on GENA’s left side, please make sure there
is space for connectors so that USB cables can be fully plugged into GENA.
USB JAKE
B
A
3.5
*A﹥B

5、The Li-On battery inside GENA may enlarge after months of usage so it is best
the space inside the case is at least 0.3mm thicker than GENA itself.
0.3mm
Li-On battery

HEADQUARTERS
Rm 1101, Tower B, Haisong Building,
Tairan Jiu Road, Futian District, Shenzhen
+ (86) 755- 82548400
BRANCH
935 Sierra Vista Avenue Suite F,
Mountain View, CA 94043
www.Mixtile.com
[phone]
Focalcrect Inc.