MJI 1689 User manual
Retro Turntable Operation Guide
MJI 1689
Thank you for buying this product. You may already be familiar with using a similar
unit , but please take the time to read these instructions.
Where to put your turntable
It is important that you consider carefully in advance where your turntable will be
situated and make sure that it is:
* On a flat and stable surface with sufficient ventilation
* Away from bright sunlight or heat sources, such as a radiator or naked flame and
lighted candles must not be placed on the turntable
* Not in a humid or very damp place such as a bathroom
Important safety instructions
Please read this instruction manual carefully before attempting to use the turntable
and keep the manual for future reference
The turntable is for indoor use only
Do not move the turntable while it is connected to the mains supply via the adapter
Clean the turntable with a slightly damp cloth and do not use abrasive cleaners
Children should be supervised to ensure that they do not play with the turntable
WARNING: If the flexible cable of the adapter is damaged, it must be replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a
hazard
FCC Statement
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB
digitaldevice,pursuanttopart15oftheFCCrules.Theselimitsaredesignedto
providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference
toradiocommunications.However,thereisnoguaranteethatinterferencewillnot
occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto
radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff
andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe
followingmeasures:
‐Reorientorrelocatethereceivingantenna.
‐Increasetheseparationbetweentheequipmentandreceiver.
‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Toassurecontinuedcompliance,anychangesormodificationsnotexpressly
approvedbytheparty.
Responsibleforcompliancecouldvoidtheuser’sauthoritytooperatethis
equipment.(Example‐useonlyshieldedinterfacecableswhenconnectingto
computerorperipheraldevices).
ThisequipmentcomplieswithPart15oftheFCCRules.Operationissubjectto
thefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and
(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethat
maycauseundesiredoperation.
General Descriptions:
1.AUX-In(Audio input)
2.Bluetooth light
3.Headphone output
4.Bluetooth
5.Turntable
6.FM Radio
7.AM Radio
8.OFF/ON//VOLUME Knob
9.Adjust the radio manually
10.Speed Selector (33/45/78 RPM)
11. Plastic clip
12. On/Off turntable
13. Automatically lift the joystick's handle
14. Vinyl
15. Stylus
16. Power
17. Line out(R)
18. Line out(L)
OPERATING INSTRUCTIONS
1.) Connection adapter,To turn on the system ‘ON’, rotate the OFF/VOLUME control
clockwise until a ‘click’ is heard, and set the Volume to a low level. The backlight
remains ‘On’.
2.) Set the Function selector (PH) to PH position.Put vinyl records in a turntable, turn to
On mode, open the Plastic clip, then let the handle up, the stick will be raised, the
stick moving turntable to vinyl above with your hand gently, then press down the
handle(note: don't directly to touch stylus by your hand, or will let the stick press down
by hand), begin to enjoy music
3.) Adjust the VOLUME control to a desired level.
AM/FM Operation
Press the AM or FM button to receive the radio,you can use the rotary knob adjust the
radio manually
USING STEREO HEADPHONES(NOT INCLUDED)
Connect a set of stereo headphones with a 3.5 mm mini-plug to the PHONE jack on the
front panel. Before putting on the headphones always set the OFF/VOLUME control to a
low level, then put the headphones on and gradually increase the volume to a comfortable
listening level. The built-in speakers automatically shut off when headphones are
connected to the PHONE jack.
BLUETOOTH FUNCTION OPERATION:
1. Turn on the unit, rotate the volume control to desert level.
Turn the Function Knob to BT mode, and make sure the tone-arm is on the resetting state.
A short Bluetooth starting tone can be heard, then the Bluetooth indicator will be flashing.
2. Turn on your Bluetooth device and scan. It will be displayed as “MJI 1689” when
discovered by your Bluetooth device.
3. When the unit is paired with your Bluetooth device, you can hear a short tone from the
speakers.
Play your Bluetooth device as you normally do and the sound will be played from this
unit. Then you may enjoy the music.
Note:
1. Make sure your Bluetooth device and this unit is within 10 meters
2. Check and see if there are other Bluetooth devices nearby interfering the signal
and connection.
3. This unit is could be paired by multiple different Bluetooth devices, but could only
be connected and played by one of them at a time. Make sure no others device is
actively connected to it already when you are trying to connect the one you are
wording on.
AUX IN FUNCTION OPERATION:
Select to the PH function Insert two ends of cord into”AUX IN “socket of unit and
corresponding socket of your external device respectively.Operate external device
as usual and through the speaker of unit can hear the songs from the external
device.
IMPORTANT NOTES
Avoid installing this unit in places exposed to direct sunlight or close to heat
radiating appliances such as electric heaters, on top of other stereo equipment that
radiates too much heat, places lacking ventilation or dusty areas, places subject
to constant vibration and/or humid or moist areas.
Do not attempt to clean this unit with chemical solvents as this might damage the finish.
Use a clean dry cloth.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example‐ use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Table of contents
