Mo-vis coot Control R-net User manual

moving forward together
Scoot Control
P015-61 Scoot Control R-net - P015-71 Scoot Control LiNX
Installation manual
Edition D-P015-61-70-M1-0600, August 2023

Contents
Contents About this manual .............................................................................. 4
Installation manual ................................................................... 4
mo-vis bv ................................................................................... 4
Important information ........................................................................ 5
Warranty ............................................................................................ 6
Repair and replacement ............................................................ 6
Amendments ............................................................................. 6
Disclaimer and limitations of remedies .................................... 7
Voiding of warranties ................................................................ 7
Technical support ................................................................................ 8
Warning labels .................................................................................... 9
Limited liability ................................................................................. 12
Preparations ..................................................................................... 13
Qualified service engineer ...................................................... 13
Tools ........................................................................................ 13
Installation plan ...................................................................... 14
1

Installation ....................................................................................... 15
Mounting bracket .................................................................... 15
Actuator Keypad ..................................................................... 17
Configuration .................................................................................... 20
R-net configuration ................................................................. 20
LiNX configuration ................................................................... 23
On-board configuration .......................................................... 25
Testing .............................................................................................. 32
Check the Scoot Control for intactness ................................... 32
Operational test ...................................................................... 32
Test drive ................................................................................. 35
Stop test .................................................................................. 35
First time use .................................................................................... 36
Calibration ........................................................................................ 38
Enter the on-board calibration mode ..................................... 38
Execute on-board calibration .................................................. 39
Maintenance .................................................................................... 42
Monthly inspection ................................................................. 42
Yearly inspection ..................................................................... 42
Error codes ....................................................................................... 43
2

Fault log ............................................................................................ 45
R-net trip codes ................................................................................ 48
Technical data ................................................................................... 53
Product description and code ................................................. 53
Device connectors ................................................................... 53
Specifications .......................................................................... 54
3

About this manual
Installation manual
This manual contains useful and important information about your device.
Please read it carefully before use and store safely for future reference.
Our team will be happy to answer your questions.
mo-vis bv
Biebuyckstraat 15D . 9850 Deinze .
Belgium
http://www.mo-vis.com .
cont[email protected] . [phone]
60
CH-REP: SKS Rehab AG, Im Wyden,
8762 Schwanden GL, Switzerland.
UK Responsible Person: QServe
Group UK, Ltd., 49 Greek Street,
London, WID 4EG, UK.
4
4 Scoot Control Installation manual

Important information
CAUTION: Incorrect use or installation may lead to risk of injury to
the user and damage to the wheelchair or other property. In order
to reduce these risks, you should carefully read this manual, paying
particular attention to the safety instructions and warning texts.
NOTICE: Only install this product on a wheelchair where the wheelchair
manufacturer allows the installation of third party parts.
5
Scoot Control Installation manual 5

Warranty
mo-vis bv warrants the product to be free from defects in material and
workmanship for a period of 2 years under proper use, care and service. The
dealer should never keep mo-vis products in stock for a period more than 6
months prior to delivery to the end-user. mo-vis' warranty will never exceed a
period of 2 years and 6 months after shipment.
All warranties do not extend beyond the initial purchaser from an authorized
mo-vis dealer or mo-vis itself.
Repair and replacement
For warranty service, contact your dealer (or us if bought directly). In the
event of a defect in material or workmanship, the dealer or customer must
obtain a Return Merchandise Authorization (RMA) number from us. The
product must be shipped to a service centre designated by mo-vis. mo-vis will
repair or, at mo-vis’ option, replace any product covered by the warranty.
Amendments
No person is authorized to alter, extend or waive the warranties of mo-vis.
6
6 Scoot Control Installation manual

Disclaimer and limitations of remedies
The express warranties set forth in this agreement are in lieu of all other
warranties of merchantability or fitness of purpose. In no event shall mo-
vis be liable for any direct, indirect, incidental or consequential damages
resulting from any defect in this product.
Warranty of parts subject to “normal wear and tear” (e.g. joystick handles,
pads, …) are not covered in the warranty except as it applies to defects in
material or construction.
Voiding of warranties
The foregoing warranties are contingent upon the proper installation, use,
maintenance and care of the product. The warranty will be void if the product
has been installed or used improperly, or if it has been repaired or any part
replaced by persons other than mo-vis or an authorized dealer. This product
is considered as a non-serviceable part.
The addition of equipment or features that are not manufactured or
recommended by mo-vis could affect the intended function of the mo-vis
product and may invalidate the warranty.
7
Scoot Control Installation manual 7

Technical support
TROUBLE:
In case of technical problems:
1 Contact mo-vis at [e-mail] or [phone].
2 Always state the device serial number when contacting us. This
ensures you are provided with the correct information.
8
8 Scoot Control Installation manual

Warning labels
Please read this manual, the safety instructions and warning texts carefully,
in order to reduce the risks associated to the device. Our products are safe
under normal and reasonably foreseeable operating conditions.
NOTE: This symbol indicates general notes and information.
CAUTION: This symbol indicates caution for a hazardous situation that,
if not avoided, could result in minor or moderate injury.
WARNING: This symbol indicates a warning for a hazardous situation
that, if not avoided, could result in death or serious injury.
Other labels:
Catalogue number: indicates the
manufacturer's catalogue number
so that the medical device can be
9
Scoot Control Installation manual 9

identified.
Batch code: indicates the
manufacturer's batch code so that
the batch or lot can be identified.
Medical device: indicates that the
item is a medical device.
Date of manufacture: indicates the
date when the medical device was
manufactured.
Serial number: indicates the
manufacturer's serial number so
that a specific medical device can be
identified.
Consult instructions for use or con-
sult electronic instructions for use:
indicates the need for the user to
consult the instructions for use.
Keep dry: indicates a medical device
that needs to be protected from
moisture.
Do not use if package is damaged
and consult instructions for use:
10
10 Scoot Control Installation manual

indicates that a medical device
should not be used if the package
has been damaged or opened and
that the user should consult the
instructions for use for additional
information.
CE label: indicates that the manufac-
turer or importer affirms the good's
conformity with European health,
safety, and environmental protec-
tion standards.
WEEE: indicates that the product
should not be discarded as unsorted
waste but must be sent to separate
collection facilities for recovery and
recycling.
Manufacturer: indicates the medical
device manufacturer.
11
Scoot Control Installation manual 11

Limited liability
mo-vis accepts no liability for personal injury or damage to property
that may arise from the failure of the user or other persons to follow the
recommendations, warnings and instructions in this manual.
CAUTION: Carry out only the service and maintenance activities
specified in this manual, as long as you comply with the demands
stated in this manual for a specific action. In case of doubt, contact mo-
vis.
WARNING: The device should always be tested without any person
sitting in the wheelchair after every alteration of the physical
installation or adjustment of the parameters.
12
12 Scoot Control Installation manual

Preparations
CAUTION: Before you start with the installation:
• Please check the packaging and verify that all items are included.
• Make sure that you have all the necessary documentation and
knowledge to install this device.
• Check the condition of the device.
Qualified service engineer
Only a qualified service engineer may install the device.
CAUTION: An incorrect programming of the wheelchair electronics may
cause damage to the devices, or injury to the user.
Tools
CAUTION: Use proper tools to install and adjust the device. The use of
improper tools may cause damage to the device.
CAUTION: Do not tighten the screws with excessive force.
13
Scoot Control Installation manual 13

Installation plan
Set up an installation plan before beginning the installation. Based on the
users' needs and capabilities, this plan should take into account:
• At which position (height, inclination ...) the Scoot Control should be
placed.
• How the Scoot Control will be operated: see Configuration on page
20
• A robust and reliable positioning. Hard or sudden movements of the
wheelchair may not disorganize the installation.
WARNING: Protect the device against bumps. Mind damaging the
unit and wiring. Make sure that cabling is mounted in such a way that
excessive wear and tear is avoided.
CAUTION: Avoid hitting obstacles during driving.
CAUTION: Any connection must always be secured with all delivered
screws. Only use the screws provided in the package.
14
14 Scoot Control Installation manual

Installation
1 Mount the unit with suited mounting parts at the desired location. If
necessary, adjust the angle and the height of the handlebar to fit the
user's position.
CAUTION: You can adjust the position of the handlebar by
loosening the screws at the sides of the handles. Afterward, screw
them up again with a maximum torque of 1Nm.
CAUTION: Always respect the indicated torque.
2 Place and secure all cabling on the wheelchair.
3 Connect the cabling to the wheelchair electronics.
WARNING: All wheelchair electronics must be switched off during
installation.
Mounting bracket
There are two dedicated mounting parts available for the Scoot Control:
• M015-70 Scoot Control Bracket Set
• M015-71 Scoot Control Bracket Set Short
15
Scoot Control Installation manual 15

16
16 Scoot Control Installation manual

NOTE: Fixation of the Scoot Control on the bracket with 4 screws
(supplied with the bracket): torque 5Nm.
Actuator Keypad
R-net version
You can connect an external Curtiss-Wright CJSM2 compatible Actuator
Keypad to the Scoot Control R-net (P015-61) to control the actuators of the
power chair.
See the Scoot Control User Manual or contact mo-vis for an overview of the
Scoot Control parts and accessories.
Please refer to the Curtiss-Wright manual SK77981-14 | R-net Technical
Manual for actuator settings and controls.
In the Scoot Control default settings, a key press will send an axis command
to the R-net system.
NUMBER ACTION
1 Axis 1 moves UP
2 Axis 1 moves DOWN
... ...
17
Scoot Control Installation manual 17

NUMBER ACTION
9 Axis 5 moves UP
10 Axis 5 moves DOWN
A parameter is available to control 10 axes instead of 5 (see On-board
configuration on page 25 for more information).
NUMBER ACTION
1 Alternating UP - DOWN movements of Axis 1
2 Alternating UP - DOWN movements of Axis 2
... ...
9 Alternating UP - DOWN movements of Axis 9
10 Alternating UP - DOWN movements of Axis 10
LiNX version
You can connect an external LiNX-compatible keypad to the Scoot Control
LiNX (P015-71) to control the actuators of the power chair.
A keypress will result in sending a command to the LiNX system. This can be
configured using the LiNX access software.
18
18 Scoot Control Installation manual

Please refer to the GBK54036 LiNX Systems Installation Manual for actuator
settings and controls.
NOTE: Toggle actions are supported by LiNX itself and should not be
set via an on-board parameter on the Scoot Control like for the R-net
version.
19
Scoot Control Installation manual 19