Switching the Heater automatically:
To use the heater in automatic mode, press the "S"
button and keep it pressed down for 3 seconds. If the
symbol "C" appears on the display, the timer is locked.
Press the "S" button again and keep it pressed down
for 3 seconds and the timer will be unlocked. The symbol
"P" will appear on the display. Now, you can adjust the
ON/OFF Time setting.
Setting the switching on time for the heater:
To set the time to on position, briefly press the "+" button
and now "ON" will appear on the flashing display.
With the aid of the "+“ and "-“ buttons, you can set a
time at which the heater is to start operating. You must
first input the hour. Once you have input the hours, wait
for about 3 seconds until the minute indicator flashes on
the display. Now input the minutes. The time will be set as
soon as the display stops flashing and "OFF AUTO" is
displayed.
Setting the switching off time for the heater:
To set the time to OFF position, briefly press the "-" button
and now "OFF" will appear on the flashing display.
With the aid of the "+“ and "-“ buttons, you can set a
time at which the heater is to be switched off. You must
first input the hours as with the switching on time. Once
you have input the hours, wait for about 3 seconds until
the minute indicator flashes on the display. Now input
the minutes. The time will be set as soon as the display
stops flashing and "OFF AUTO" is displayed.
Setting the time:
To set the time, briefly press the "S“ button. Now the hour indicator
flashes on the display as already described for the switching on/
switching off time. The time can be set with the "+“ and "-“ buttons.
Once you have input the hours, wait for about 3 seconds until the
minute indicator flashes on the display. Now input the minutes. The
time will be set as soon as the display stops flashing and "OFF
AUTO" is displayed. As a last step, the input is stored. To do this,
press the "S“ button and keep it pressed down for 3 seconds until
the symbol "C" appears on the display.
Sheet 5 of 8
