Mobility Sound PTT-100-V7 User manual

PTT-100-V7
Bluetooth Speaker
Microphone For TPH700
User Manual
1. Introduction to the product 2. Pairing with Cassidian TPH700
Power button
2.5mm
char in hole
1. Make sure PTT-100-V7 is OFF.
2. Press the power button down
and hold it for 3 seconds.
3. The LED blue and red li ht
flashin alternately, PTT-100-V7
now in pairin mode.
4. Release the power button.
PTT Clip
Press and hold the
power button to turn
PTT-100-V7 ON/OFF
Blue LCD li ht Red LCD li ht

3. Pairing with TPH700
Turn on the Bluetooth in TPH700
and search for device “PTT-100-V7”
MobilitySound Technolo y LTD.
www.mobilitysound.com
[email protected]
How to - LED status
Turn on Press Power button for approx. 2 sec. (while PTT-100-V7 is off) Blue LED blinking
Turn off Press Power button for approx. 4 sec. (while PTT-100-V7 is on) Red LED blinking 3 times then off
Pairing Mode Press Power button for approx. 3 sec. (while PTT-100-V7 is off) Red & Blue LED flashing alternately
PTT Press PTT button while PTT-100-V7 paired with BT Dongle Red LED on when button pressed