Mobotix MOBOTIX M73 Original operating instructions

Quick Installation
MOBOTIX M73
©2022MOBOTIX AG
V7.39_7/19/2022, Order Code: Mx-M73

Table of Contents
Table of Contents
Table of Contents 2
Before You Start 5
Support 6
Safety Notes 6
Legal Notes 7
Notes on System Security 9
Drilling Template 11
Drilling Template PDF 12
Delivered Parts and Dimensions 13
M73: Scope of Delivery 14
Connector Box RJ45: Scope of Delivery 16
Connector Box LSA: Scope of Delivery 18
Mounting Supplies: Scope of Delivery 20
Technical Specifications 22
Hardware 23
Image Formats, Frame Rates, Image Storage 25
General Features 26
Video Analysis 27
Video Management Software 27
Sensor Modules 28
Features ECO Thermal Image Sensor 28
Supported Sensor Modules 29
Supported Thermal Sensor Modules (Pre-mounted on Thermal Front Plate) 30
Features Thermal Image Sensors 31
Functional Modules 32
Connector Box LSA / Connector Box RJ45 33
Mounting 34
Before Mounting the Camera 36
Protective Measures 37
Installing the Sensor Modules 38
Opening the Module Housing 44
Installing the Security Clips 46
Closing the Module Housing 47
Installing a Thermal Front Plate 49
Removing the Security Clips 50
Removing Installed Sensor Modules 51
2 / 110

Installing the Sensor Modules to the Thermal Front Plate 55
Mounting Options 59
Mounting to a Wall 59
Mounting to a Pole 64
Connecting the camera 70
Connecting the Camera to the Network 70
Terminal Connectors 80
Finishing the Installation of the Camera 82
Operating the Camera 88
Getting Started 89
Boot Options of the Camera 89
Network Settings 92
Focusing the TELE 15° Sensor Module 97
Camera Software in the Browser 100
Access the camera's website in the browser 101
Basic Settings 101
Configuring Sensor Modules 102
Maintenance 104
Opening the Camera Body 105
Replacing the microSD card 108
Cleaning the Camera and Lenses 109
Table of Contents
3 / 110

5 / 110
Before You Start
This section contains the following information:
Support 6
Safety Notes 6
Legal Notes 7
1

Before You Start
Support
Support
If you need technical support, please contact your MOBOTIX dealer. If your dealer cannot help you, he will
contact the support channel to get an answer for you as quickly as possible.
If you have internet access, you can open the MOBOTIX help desk to find additional information and software
updates. Please visit:
www.mobotix.com > Support > Help Desk

Safety Notes
nThis product must not be used in locations exposed to the dangers of explosion.
nDo not use this product in a dusty environment.
nProtect this product from moisture or water entering the housing.
nInstall this product as outlined in this document. A faulty installation can damage the product!
nThis equipment is not suitable for use in locations where children are likely to be present.
nWhen using a ClassI adapter, the power cord shall be connected to a socket-outlet with proper ground
connection.
nTo comply with the requirements of EN50130-4 regarding the power supply of alarm systems for 24/7
operation, it is highly recommended to use an uninterruptible power supply (UPS) for backing up the
power supply of this product.
nThis equipment is to be connected only to PoE networks without routing to other networks.
NOTE! Observe the MOBOTIX MOVE Installation Hints document to ensure optimum performance of the
camera features.
6 / 110

Legal Notes
Legal Aspects of Video and Sound Recording
You must comply with all data protection regulations for video and sound monitoring when using MOBOTIX
AG products. Depending on national laws and the installation location of the cameras, the recording of video
and sound data may be subject to special documentation or it may be prohibited. All users of MOBOTIX
products are therefore required to familiarize themselves with all applicable regulations and to comply with
these laws. MOBOTIX AG is not liable for any illegal use of its products.
Declaration of Conformity
The products of MOBOTIX AG are certified according to the applicable regulations of the EC and other coun-
tries. You can find the declarations of conformity for the products of MOBOTIX AG on www.mobotix.com
under Support> Download Center> Marketing &Documentation>Certificates & Declarations of Con-
formity.
RoHS Declaration
The products of MOBOTIX AG are in full compliance with European Unions Restrictions of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive 2011/65/EC) as far as they are
subject to these regulations (for the RoHS Declaration of MOBOTIX, please see www.mobotix.com, Support>
Download Center> Marketing &Documentation>Brochures & Guides> Certificates).
Disposal
Electrical and electronic products contain many valuable materials. For this reason, we recommend that you
dispose of MOBOTIX products at the end of their service life in accordance with all legal requirements and reg-
ulations (or deposit these products at a municipal collection center). MOBOTIX products must not be dis-
posed of in household waste! If the product contains a battery, please dispose of the battery separately (the
corresponding product manuals contain specific directions if the product contains a battery).
Disclaimer
MOBOTIX AG does not assume any responsibility for damages, which are the result of improper use or failure
to comply to the manuals or the applicable rules and regulations. Our General Terms and Conditions apply.
You can download the current version of the General Terms and Conditions from our website at www.-
mobotix.com by clicking on the corresponding link at the bottom of every page.
Before You Start
Legal Notes
7 / 110

Before You Start
Legal Notes
FCC Disclaimer
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
8 / 110

Notes on System Security
To protect the camera against security risks in data technology, the following measures are recommended
after the installation has been completed:
MxManagementCenter:
nMenu View> Wizards & Tools> Secure System:
nChange camera factory default password: √
nEnable encrypted HTTPS: √
nDisable public access: √
nUser Management (for all users):
nForce Complex Password: √
nLog out on Inactivity: After 5 min
User interface of the camera in the browser:
nAdmin Menu> Network Setup> Web Server:
nEnable MxWeb: –
nEnable intrusion detection: √
nNotification threshold: 10
nTimeout: 60 minutes
nBlock IP Address: √
For more information on this new feature, please read the «Cyber Protection Guide» on www.mobotix.com
(under Support> Download Center> Documentation> Brochures & Guides> Cyber Security).
Notes on System Security
Legal Notes
9 / 110

11 / 110
Drilling Template
Open this file in a PDF viewer (Acrobat Reader, Foxit Reader, or similar) and print the file
without scaling (original size).
NOTE! Download the drilling template from the MOBOTIX website: www.mobotix.com>
Support > Download Center > Marketing & Documentation> Drilling Templates.
CAUTION! Always print or copy the drilling template at 100% of the original size!
1

Montageplatte / Mounting Plate / Plaque de xation
Maßstab / Scale / Echelle : 1:1
Bohrschablone / Drilling Template / Gabarit de perçage
Solution Platform M73
MOBOTIX ist ein eingetragenes Warenzeichen der MOBOTIX AG in der Europäischen Union, den USA und in anderen Ländern.
Änderungen vorbehalten. MOBOTIX übernimmt keine Haung für technische Fehler, Druckfehler oder Auslassungen. Alle Rechte
vorbehalten. • © MOBOTIX AG 2019
www.mobotix.com>Support>DownloadCenter>Dokumentation>Zertikate&Konformitätserklärungen
MOBOTIX is a trademark of MOBOTIX AG registered in the European Union, the U.S.A., and in other countries. Subject to change
without notice. MOBOTIX do not assume any liability for technical or editorial errors or omissions contained herein. All rights
reserved. • © MOBOTIX AG 2019
www.mobotix.com>Support>DownloadCenter>Documentation>Certicates&DeclarationsofConformity
MOBOTIX est une marque déposée de MOBOTIX AG en Union Européenne, aux États-Unis et dans d’autres pays. Susceptible de
modication sans préavis. MOBOTIX ne se tient responsable d‘aucune erreur technique ou de rédaction, ni d‘omission dans le
présent document. Tous droits réservés. • © MOBOTIX AG 2019
www.mobotix.com>Support>Centredetéléchargement>Documentation>Certicats&Déclarationsdeconformité
MOBOTIX AG
Kaiserstrasse
D-67722 Langmeil
Germany
Tel.: [phone]
Fax: [phone]
[e-mail] / [email protected]
www.mobotix.com
60 mm/2.36 in
120 mm/4.72 in
35 mm/1.38 in
19,5 mm/
0.77 in
45 mm/1.77 in
21,5 mm/
0.85 in
21,5 mm/
0.85 in
20,5 mm/
0.81 in
⇧OBEN / TOP ⇧
Ø 6.5 mm/
0.26 in
~86,5 mm/3.41 in
153 mm/6.02 in
Dichtung
Sealing
Joint d‘étanchéité
3 Kabeldurchführungen Ø 16 mm
3 cable bushing Ø 16 mm/0.63 in
3 passe-câbles Ø 16 mm
NurinOriginalgrößekopie-
renoderausdrucken!
Alwayscopyorprintat
100%oforiginalsize!
Copier ou imprimer uni-
quementauxdimensions
d’origine!
Installationnur aufebenerFläche! Unebenheitendürfen
0,5mmnichtüberschreiten!
Installation only on level surface! Unevenness must not
exceed0.5mm/0.02in!
Montageuniquementsurunesurfaceplane!Lesinégalités
nedoiventpasdépasser0,5mm!
• Bohrungen für Befestigungsschrauben Ø 5 mm
• Holes for mounting screws 5 mm diameter
• Trous pour les vis de montage de 5 mm diamètre
• Kabeldurchführungen Ø 16 mm
• Cable bushings 16 mm/0.63 in diameter
• Passe-câbles de 6 mm diamètre

13 / 110
Delivered Parts and Dimensions
This section contains the following information:
M73: Scope of Delivery 14
Connector Box RJ45: Scope of Delivery 16
Connector Box LSA: Scope of Delivery 18
Mounting Supplies: Scope of Delivery 20
2

M73: Scope of Delivery
Fig. 1: Scope of delivery MOBOTIX M73 Body

Scope of delivery M73 Body
Item Count Description
1.1 1 M73 Body with module housing, front plate and
transport plugs, complete
1.2 1 Module housing
1.3 1 Front plate
1.4 3 Transport plug
1.5 1 Blind module (must be installed when using only
two sensor modules)
1.6 1 Mounting plate with wall sealing (installed), two
standard plugs (installed), and inserted connector
box.
1.7 1 MOBOTIX Ethernet patch cable, 50cm/19.7in
with sealing
1.8 1 SD card 8GB (installed)
1.9 1 Mounting supplies (see Scope of Delivery
MOBOTIX M73 Mounting Supplies, p. 20)
1.10 1 Important Safety Information
1.11 1 Sticker with EAN number of camera
1.12 1 Sticker with IP address of camera

Connector Box RJ45: Scope of Delivery
Fig. 2: Scope of Delivery MOBOTIX M73 Connector Box RJ45

Scope of Delivery M73 Connector Box RJ45
Item Count Description
C.1 1 Connector box RJ45 black with rubber plug
black, rubber plug single-wire white, USB plug
blue (installed)
C.2 1 Protective cover for connector box polystyrene
white (installed)
C.3 1 Rubber plug black (installed)
C.4 1 Rubber plug single-wire white (installed)
C.5 1 Rubber plug cable dia. 3.5mm white (to replace
C.5)
C.6 1 USB plug connector box blue (installed)

Connector Box LSA: Scope of Delivery
Fig. 3: Scope of Delivery MOBOTIX M73 Connector Box LSA
Scope of Delivery M73 Connector Box LSA
Item Count Description
C.1 1 Connector Box LSA black with rubber plug black,
rubber plug single-wire white, USB plug blue
(installed)
C.2 1 Protective cover for connector box polystyrene
white (installed)
C.3 1 Rubber plug black (installed)

Scope of Delivery M73 Connector Box LSA
Item Count Description
C.4 1 Rubber plug single-wire white (installed)
C.5 1 Rubber plug cable dia. 3.5mm white (to replace
C.5)
C.6 1 USB plug connector box blue (installed)
C.7 1 Ground wire (for overvoltage protection func-
tionality)

Mounting Supplies: Scope of Delivery
Fig. 4: Scope of Delivery MOBOTIX M73 Mounting Supplies
Scope of Delivery M73 Mounting Supplies
Item Count Description
M.1 1 Module wrench (gray)
M.2 1 Lens wrench blue
M.3 3 Housing plug silicone white
M.4 3 Security clips plastic red
M.5 2 Cable tie black