Mocka Kids Steel Wheelbarrow User manual

Kids Steel Wheelbarrow
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hardware Supplied
ALL nuts and bolts must be checked and tightened
tight to ensure safety.
BC
nut
x4
A
screw
x4
spanner
x1
Warning: Small parts are used to assemble the Kids Steel
Wheelbarrow and should only be assembled by an adult.
Keep all assembly parts away from small children.
Suitable for ages 12 months +
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Flathead screwdriver required.

12
Kids Steel Wheelbarrow
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Firstly join together the two handle rods using the plastic connector as
shown. Repeat step for the second handle.
Next attach one wheelbarrow leg piece and one handle rod to the
wheelbarrow tray using 2x bolts (A) inside the tray and fasten securely
with 2x nuts (B). Tighten with spanner (C).
A
B
A
C

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Slot the wheel on to the middle of the axle piece and insert into the hole
at the end of the handle rod as shown.
Slot the second handle piece on to the wheel axle and position in place
over the holes in the underside of the wheelbarrow tray
Kids Steel Wheelbarrow
4

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
A
B
A
B
Kids Steel Wheelbarrow
6
Attach the second wheelbarrow leg piece and handle rod to the
wheelbarrow tray using 2x bolts (A) inside the tray and fasten securely
with 2x nuts (B). Tighten with spanner (C).
Use the spanner (C) and flathead screwdriver to tighten all bolts and
regularly check these are tight to ensure safety. You’re done, enjoy!
C