Mocka Mod Toy Cart User manual

Mod Toy Cart
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A
bolt
x8
B
nut
x8
C
dowel
x4
WARNING: Due to the small size of the hardware and the sharp
points of the screws, they are potentially hazardous.
Keep all assembly parts and packaging materials out of reach of
children
Retain packaging information for future reference
Adult assembly required
Recommended age 18 months +

12
Mod Toy Cart
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x bolts (A) into panel [1] and tighten with a screwdriver. Repeat
step for opposite side.
Insert 2 x dowels (C) into panel [1]. Attach panels [2] and [3] to panel
[1] and secure with 4 x nuts (B). Tighten with a screwdriver.
1
1
2
3
B
B
B
B
C
C
x 2

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Slide panel [4] between panels [2] and [3] as shown. Insert 2 x dowels (C) into panel [1]. Attach panel [1] to panels [2] and
[3] and secure with 4 x nuts (B). Tighten with a screwdriver. You’re
done, enjoy!
Mod Toy Cart
4
4
2
2
3
3
C
C
B
B
B
B
1