MODVO SM-6 User manual

SM-6
MONITOR SPEAKER
Quick
Guide
Setup Manual
SM-6

SM-6 Monitor Speaker
INTRODUCTION:
Thank you for your choice in purchasing our loudspeakers. The SM-6 is one of our com-
pact monitor speaker designed by MODVO, a manufacturer that specialize in building
compact loudspeakers.
The SM-6 speaker adds quality and sound at a affordable price. This compact monitor
speaker adds clean and detailed sound that is not heard of in a speaker this size and price.
PREPARING THE SPEAKERS:
Please read this entire manual before making any connections. Follow the steps below.
1. Before you hook-up your speakers, make sure your receiver/amplifier is powered
off. Once your amplifier is off, you can begin hooking up you speakers to the amp.
There are two terminals on the rear of each satellite speaker, one red positive (+) and the
other black negative (-). The positive terminal of you speaker should be connected to the
positive lead of your amplifier / receiver and the negative terminal to the negative lead
(as shown below). If you are going to use these speakers as main (front speakers) speak-
ers on a 5.1 or 7.1 receiver, make sure they are connect to the front speaker leads (FT or
Front L/R) as labeled on your receiver.
Red is
positive
And black
Is negative
+
_
L R
Reciever / Amp

SPEAKER MAINTENANCE
For the life of your speakers, we recommend using reasonable power and volume level.
These speakers are designed to be used with amplifiers with a maximum power of 100
watts per channel. To prevent burn-out or damage to the drivers, avoid setting bass
level on max, half way is more reasonable for a speaker this size. This will prevent
the speakers from clipping and bottoming out at high level of sound.
CABINET MAINTENANCE
The speaker cabinets should be treated the same way as a piece of furniture. Each
speaker cabinet is finished in a gloss paint, which does not require any special cleaning.
A simple lint-free cloth will work fine for cleaning. Do not use any liquid chemicals to
clean, by doing so, this can streak the finish. No sharp object should be place on or
near the speakers, by doing so, will scratch the finish.
SM-6 Compact Monitor Speaker
Since The SM-6 speaker is a rear vented/ported speaker, it should be placed 2 -3 feet
from the wall to insure proper airflow from the rear firing ports. Depending on the size
of your room, it is recommend to try different speaker placements until you achieve
the desired sound. How far you place your speakers from the wall, will determine the
bass response of them.
SETUP
Wall
Listening Are
2 -3 ft
2 -3 ft Rear
Firing
Ports
Page 3

SYSTEM SPECIFICATION:
Monitor Speaker (each)
Cabinet Type: Vented
Drivers:
3/4" silk dome tweeter
6 1/2" Cast frame woofer with large rubber surround
Terminal Plate:
Binding post terminals
Ohms: 8
Power handling: 15 - 80 watts max
Frequency Response: 60 - 20,000Hz
Sensitivity: 88 dB (/2.83V/m)
Dimensions: 8-3/8" W x 11-1/4" H x 11"D
© 2014 MODVO, All Rights Reserved
WWW.MODVO.COM
Contact Us Online
Site: www.modvo.com
Email: [email protected]
Fb: facebook.com/modvo
If you have any problem on setting
up your speakers, please feel free to
Contact us. We’ll do our best to
have your speakers up and running.