modway EEI-5298 User manual

ASSEMBLY INSTRUCTIONS
EEI-5298
V1.03.22.21
Questions? Contact us!
609.256.9000 • [e-mail]
www.modway.com

Let’s get started!
Hardware included in the box:
You may also need:
A
B
C
D
E
F
x1
x1
x2
x2
x1
x1
Inner Hexagon Screw
2MM Allen Key
Short Screw
Countersunk Screw
2.5MM Allen Key
Washer Plate
+ One (1) E26 (medium-base) Light Bulb (MAX. 60W)
Missing parts or hardware? Need assistance?
Contact us before returning your item.
We're here to help!
609.256.9000 • [e-mail]
What you need:
1Phillips Head Screwdriver
Phillips
Before you begin, here are
some things to keep in mind:
Read through all of the instructions before
starting. Make sure you have all parts and
components before discarding any packing
materials.
Do not over-tighten screws and bolts to avoid
stripping the hardware or cracking the item.
Assemble your item on a at, carpeted area,
with plenty of space to work. This will prevent
damage and scratches to your oors or the
item while you’re assembling the product.
Keep all components and packaging out of
reach of children or animals to avoid risk of
choking or suocation.
Check all parts and hardware for damage. If the
product is damaged, it should not be used.
We recommend LED bulbs. LEDs are better for
energy consumption and can prolong the life
of the xture.
Allow the xture to cool before changing the
bulb. Fixture may get hot when in use.
CARING FOR YOUR ITEM
Indoor use only.
Clean using a non-abrasive cloth and a mild cleaner.
Never use harsh chemicals, as they could damage
the nish or integrity of the item.
+1 Spare Included
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.

Step 1 Remove the Inner Hexagon
Screw (A) from the upper metal tube
and rmly attach the lamp shade to
the upper metal tube.
Step 2 Using the 2MM Allen Key (B),
screw the Inner Hexagon Screw (A)
into the upper metal tube.
Step 3 Pull the wire through the metal
tubes as shown in the drawing.
Step 4 Remove the 2 Short Screws (C)
from the upper metal tube and insert the
upper metal tube into the lower metal tube.
Step 5 Secure with the 2 Short Screws (C).
Step 6 Attach the Washer Plate (F) and
lamp base to the lower metal tube and
secure with 2 Countersunk Screws (D)
using the 2.5MM Allen Key (E) as shown in
the drawing.
Step 7 Install light bulb according to the
wattage label (E26, MAX. 60W, bulbs not
included).
ATTENTION: To avoid the risk of re, do not exceed the
recommended wattage indicated on the wattage label.
1
2
3
5
6
7
3
4