modway EEI-5305 User manual

ASSEMBLY INSTRUCTIONS
EEI-5305
V1.03.19.21
Questions? Contact us!
609.256.9000 • [e-mail]
www.modway.com

Let’s get started!
Before you begin, here are
some things to keep in mind:
Read through all of the instructions before
starting. Make sure you have all parts and
components before discarding any packing
materials.
Do not over-tighten screws and bolts to avoid
stripping the hardware or cracking the item.
Assemble your item on a at, carpeted area, with
plenty of space to work. This will prevent damage
and scratches to your oors or the item while you’re
assembling the product.
Keep all components and packaging out of reach
of children or animals to avoid risk of choking or
suocation.
Check all parts and hardware for damage.
If the product is damaged, it should not be used.
We reccomend LED bulbs. LEDs are better for energy
consumption and can prolong the life of the xture.
Allow the xture to cool before changing the bulb.
Fixture may get hot when in use.
Hardware included in the box:
You may also need:
Ax1Lamp Socket Ring
+ One (1) E26 (medium-base) Light Bulb (MAX. 60W)
Missing parts or hardware? Need assistance?
Contact us before returning your item.
We're here to help!
609.256.9000 • [e-mail]
CARING FOR YOUR ITEM
Indoor use only.
Clean using a non-abrasive cloth and a mild cleaner.
Never use harsh chemicals, as they could damage
the nish or integrity of the item.
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.

Step 1 Connect the lower center pole
to the upper center pole.
Step 2 Attach each leg to the lower center
pole at its corresponding mark (A, B, or C).
Step 3 Unfold the lampshade fabric on a
clean, at surface, put the two metal rings
of the lampshade on either side of the
fabric. Roll the two metal rings along the
adhesive strip on the fabric as shown in
the drawing.
Step 4 Tightly press the two edges of
the lampshade together, completing
the lampshade.
Step 5 Place the lamp shade onto the
lamp socket and secure it with the Lamp
Socket Ring (A).
Step 6 Install the light bulb according
to the wattage label (E26, MAX. 60W,
bulb not included)
ATTENTION: To avoid the risk of re, do not exceed the
recommended wattage indicated on the wattage label.
A
6
5
1
AB
B
B
C
C
C
A
A
2
4
3
Complete!
Note that the socket
hole on the lamp shade
is on the bottom
when installing.