9
Thermostat Operation Guide
1. Power: Use the power button to turn the thermostat on or off.
2. Cooling/Heating Mode: This thermostat offers cooling or heating modes, switchable
via the app or the "Advanced Options Settings."
3. Operating Modes: Toggle between Manual, Programming, Temporary Manual, and
Holiday modes by pressing on the app or the thermostat control panel. Each
mode is indicated by specific icons on the screen.
•Manual Mode (Hand Icon): Set the temperature manually, and the thermostat
maintains it.
•Programming Mode (Clock Icon):Follows the weekly schedule set in the app.
Refer to point 7 for schedule setup.
•Temporary Manual Mode: Allows manual temperature adjustment within the
programming mode. The thermostat reverts to the programmed settings after
the next cycle.
•Holiday Mode (Clock and Hand Icons): Maintains a fixed temperature until the
end of the holiday period. Set the duration in the app or by long pressing to
access the clock settings.
4. Temperature Setting: Adjust the target temperature using the up and down icons.
5. Time Setting: The Wi-Fi version syncs time automatically when connected. For
manual adjustment, long-press , then use the up and down icons to set minutes,
hours, and days of the week (1 for Monday, 2 for Tuesday, and so on). Press power
button to exit.
6. Child Lock: Activate child lock by holding the up and down icons for 5 seconds. Full
and half lock options are available in advanced settings.
7. 5+1+1 Programming Mode Setting: Set this mode in the app for Wi-Fi versions. For
non-Wi-Fi models, long-press to access clock settings, press four times to enter
programming mode. Configure the cycle (1 ), then set the hour, temperature, and
cycle using the up and down icons. Save the settings by turning off the thermostat.
