Moe's COLVIN SR-1028-24 User manual

ASSEMBLY INSTRUCTIONS.
COLVIN SIDEBOARD SMALL
SR-1028-24
THANK YOU FOR YOUR PURCHASE!

PARTS AND HARDWARE.
PARTS LIST
HARDWARE LIST
No. DESCRIPTION IMAGE QTY
DBOLT M6, 12MM 12
EBOLT M6, 15MM 2
F ALLEN KEY 4MM 1
NOTES.
Thank you for purchasing this quality
product! Be sure to check all packing
material carefully for small part that may
have come loose inside the carton during
shipping.
CAUTION: The item is heavy,
assembly should be performed by
two people.
No. DESCRIPTION IMAGE QTY
A BODY 1
B
BOTTOM MID
RAIL
1
C METAL FRAME 2
STEP 1.
Ali n Tabs of Metal Frame (C) on to Slots of the Frame which is attached with the Bo
ttom of the
Side board (A) as shown below in dia ram, Insert Allen Bolt (E), and ti hten with Allen Key (F
). Now
Ali n the Metal Clip on the Metal Frame (C) with the Fasten
ers Inserted into the Side board
Bottom Frame (A).Now, Insert Allen Bolt (D), & ti hten with Allen Key (F
). Repeat the same process
to secure other end. Do not ti hten Allen Bolts fully.
STEP 2.
Now, ali n Tabs of Metal Bottom Mid Rail (B) onto Slots on Metal frames on both ends as
shown below in dia ram. Insert Allen Bolt (E), and ti hten with Allen Key (F). Repeat the same
process on other end. Now fully ti hten all Connections. Once all connections are fully ti hten,
Turn the table in upri ht position. Product is ready to use