Moe's TIBURON SR-1019-24 User manual

ASSEMBLY INSTRUCTIONS.
TIBURON CONSOLE TABLE
SR-1019-24
`
THANK YOU FOR YOUR PURCHASE!

PARTS AND HARDWARE .
PARTS LIST
No. DESCRIPTIO
N IMAGE QTY
A METAL
FRAME 2
BBODY 1
CMETAL BACK
RAIL 2
HARDWARE LIST
No. DESCRIPTION IMAGE QTY
DBOLT M6, 15MM 20
EWASHER 15MM 16
F ALLEN KEY 4MM 1
G HEX BOLT 10MM 4
NOTES.
Thank you for purchasing this quality
product! Be sure to check all packing
material carefully for small part that may
have come loose inside the carton during
shipping.
CAUTION: The item is heavy,
assembly should be performed by two
people.
STEP 1
.
Align Tabs of Metal Frame (A) With the Fasteners inserted into Bottom of the Desk Top (C)
as shown below in diagram, Insert Allen Bolt (D), Washer (E), and tighten with Allen Key (F).
Repeat the same process to secure other end. Do not tighten Allen Bolts fully.
STEP 2 .
Now, align Tabs of Metal Back Rail (B) onto Slots on Metal frame assembly on both ends as
shown below in diagram. Insert Allen Bolt (D), Washer (E), & place the Hex bolt (G) from
back of the hole in the frame, grab the hex bolt by the spanner (H) & tighten with Allen Key
(F). Repeat the same process on other end. Now fully tighten all Connections. Once all
connections are fully tighten, Turn the table in upright position. Once all connections are fully
tighten, Turn the table in upright position. Product is ready to use