Moe's VE-1001-03 User manual

BENT DINING TABLE SMALL
VE-1001-03
ASSEMBLY INSTRUCTIONS
Before beginning:
º Unpack all parts and hardware to ensure you have all needed components for assembly.
º Read this guide cover to cover before beginning assembly.
º Have 2 adults on hand for assembly.
º Assemble on a padded, non-marring surface.
º Save all packaging until finish.
Components:
(A) Top, 1x (B) Leg, 2x
(C) Hex Bolt 6x (D) Washer 6x (E) Spanner 1x
Hardware and tools:
Assembly steps
Step 1: Lay the Top (A) on a soft surface, with the insert nuts facing up. Place the table Legs (B) making
them match with the nuts as shown in the image.
Insert Nuts

Step 2: Attach the legs using the Bolts (C), Washers (D) and Spanner (E) provided.
Step 3: Turn the table on its upright position and adjust the levellers under the legs if needed.
Levellers
Care Instructions:
º Do not clean furniture with harsh clensers or polish.
º Do not put hot items directly on furnitue surface.
º Do not put furniture in direct sunlight.
º Not for commercial use. For residential use only.
º Dust and pick up spills with a clean, non-colored, lint-free cloth.
º Stains may be removed with mild soap and damp cloth.
Thank you!
Assembly complete.