Moe's COLVIN SR-1027-24 User manual

ASSEMBLYINSTRUCTIONS.
COLVIN CONSOLE TABLE
SR-1027-24
THANK YOU FOR YOUR PURCHASE!

PARTS AND HARDWARE.
PARTS LIST
No. DESCRIPTION IMAGE QTY
A METAL
FRAME 2
BBODY 1
CMETAL
BOTTOM
RAIL 1
HARDWARE LIST
No. DESCRIPTION IMAGE QTY
DBOLT M6, 12MM 12
EBOLT M6, 15MM 2
F ALLEN KEY 4MM 1
NOTES.
Thank you for purchasing this quality
product! Be sure to check all packing
material carefully for small part that may
have come loose inside the carton during
shipping.
CAUTION: The item is heavy,
assembly should be performed by
two people.
STEP 1.
Align Tabs of Metal Frame (A) onto Slots of the Frame which is attached with the Bottom of the Console
Frame (B) as shown below in diagram, Insert Allen Bolt (E) and tighten with Allen Key (F). & also align
the Metal Clip on the Metal with the Fasteners Inserted into the Console Bottom Frame (B).Now, Inser
t
Allen Bolt (D) tighten with Allen Key (F). Repeat the same process to secure other end. Do not tighten
Allen Bolts fully.
STEP 2.
Align Tabs of Metal Bottom Rail (C) onto Slots on Metal frame assembly (A) on both ends as shown
below in diagram. Insert Allen Bolt (E) and tighten with Allen Key (F). Repeat the same process on other
end. Now fully tighten all Connections. Once all connections are fully tighten, Turn the table in upright
position. Product is ready to use