Moe's COLVIN BENCH VE-1032-03 User manual

COLVIN BENCH
VE-1032-03
Assembly Instructions
Component List:
(A) Metal Frame Leg,3x
(B) Bench Top, 1x
Tools List:
(C) Allen Bolt M6,
40mm, 4x
(D) Allen Bolt M6,
20mm, 5x
(E) Washer 17 mm, 4x
(F) Allen Key 4mm, 1x
Before beginning:
Unpack all parts and hardware to ensure you have all needed components for assembly.
Read this guide cover to cover before beginning assembly.
Have 2 adults on hand for assembly.
Assemble on a padded, non-marring surface.
Save all packaging until finish.
ASSEMBLY STEPS -

Step 1: Align Tabs of Metal Frame (A) With the Fasteners inserted into Bottom of the Dining table
Top (B) as shown below in diagram, Insert Allen Bolt (C/D), with Washer (E) & tighten with Allen Key
(F). Repeat the same process to secure other end. Do not tighten Allen Bolts fully.
Step 2: Once all connections are fully tighten, Turn the table in upright position.

Care:
Do not clean furniture with harsh clensers or polish.
Do not put hot items directly on furnitue surface.
Do not put furniture in direct sunlight.
Not for commercial use. For residentiual use only.
Dust and pick up spills with a clean, non-colored, lint-free cloth.
Stains may be removed with mild soap and damp cloth.
Thank you!
Step 3: Product is ready to use.
ASSEMBLED VIEW