Moen 84502 User manual

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(25mm)
1/2" IPS
ADAPTER
2"
(25mm)
DECK PLATE
Lift
Rod
TOP OF
MOUNTING
SURFACE
2"
(51mm)
ESC.
WIDTH
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
4-3/8"
(111mm)
5-1/8" (130mm)
Single-Handle Lavatory Faucet
with Plastic Waste Assembly
Model: 84502
Less Waste
Model: 84500
DESCRIPTION
•Metal construction with a chrome plated finish
•1/2" IPS connections
OPERATION
•Pivot action knob style handle
•Temperature controlled through 180˚ degree arc
of handle travel
FLOW
•Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
•1225 cartridge design
•Nonmetallic/nonferrous and stainless steel material
•Can accommodate reversed piping and back to
back installations
STANDARDS
•Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
•Certified to ANSI/NSF 61/9
•Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
WARRANTY
•Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations NOTE: See reverse side for illustrated parts
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER