Moen BAMBOO TS881 Series User manual

BAMBOO™
Two-Handle Widespread
Lavatory Faucet Trim
Model: TS881 series
Valve: 9000
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3 HOLES, 1" MIN. DIA.
2-7/8"
(72mm)
2-3/8"
(60mm)
2-3/16"
(56mm) 1-7/8"
(48mm)
4-5/8"
(116mm)
5-1/2"
(140mm)
1-1/4" (32mm)
Max Deck Thickness
3-1/4"
(83mm)
7-1/4"
(184mm)
8"
(203mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up type waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to: WaterSense®, CSA B125.1, ASME A112.18.1,
ICC A117.1 and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
Rev. 3/11